Waste oil extraction system-stationary PNP 5:1-SAR-O-WB-8 m 19901
€910.00
Free shipping
Waste oil extraction system-stationary PNP 5:1-SAR-O-WB-8 m 19901
Technical data
Compressed air connection Plug nipple for Rectus coupling, type 26, NW 7.2 mm
Discharge via pneumatic pump 5:1
Suction capacity probe Ø 5 mm (l/min) 1.0 - 1.5
Suction capacity probe Ø 6 mm (l/min) 2.0 - 2.5
Suction capacity probe Ø 8 mm (l/min) 3.5 - 4.0
Connection on pressure side G 3/4" a
Media suitable for waste oils of known origin with a flash point above 55 °C or flame-retardant liquids, not suitable for highly flammable liquids
Specification
Stationary, for direct delivery via pipework to the collection tank
For direct extraction from motor vehicles and commercial vehicles
Pneumatic oil pump 5:1 (19 385)
Plug nipple (20 062)
Suction hose (19 512)
Suction hose, 2 m, transparent as visible section
With hose reel, O, WB, 8 m (29 341)
Ball valve mounted on the suction side of the hose reel
Wall bracket (19 521)
Strainer, sieve, G 3/4'' i, G 3/4'' i (19 761)
Complete accessories for installation
Delivery hose, 4 m
Barrel screw connection, G 2'' a
Suction probes, Ø 5/6/8 mm
With adapter for BMW, Mercedes, VW, Audi and Smart
Probe holder
Can be installed with vacuum cut-off (19 422)
Special features
Used oil must not be stored in the work area. If the oil is drained into an oil collection tank via a pipe, an overfill protection device must be provided in accordance with WHG. Regional regulations and guidelines of the countries must be observed.