Waste oil collector/extractor 80l - 19793391
€1,400.00
Free shipping
Waste oil collector/extractor 80l - 19793391
Technical data
Tank capacity (litres) 80
Tank capacity (litres) 15
2 compressed air connections Plug nipple for Rectus coupling, type 26, NW 7.2 mm
Recommended air pressure (bar) 6
Min. oil temperature (°C) 70
Paint finish Container window grey, silk matt, RAL 7040
Paint finish drip tray blue, RAL 5010
Media suitable for waste oils of known origin with a flash point above 55 °C or flame-retardant liquids, cannot be used for highly flammable liquids
Dimensions LxWxH (mm) 500 x 500 x 1700
Specification
With glass measuring cylinder, 10 litres
A vacuum is created in the container via the Venturi block using compressed air
Pressure gauge for pressure display
Suction via dipstick opening
Suction hose, 2 m, with spiral spring
4 suction probes, 2 each, Ø 5/8 mm
With adapter for BMW, Mercedes, VW and Audi
Transparent discharge hose, 2 m, with metal discharge elbow
Collecting tray with sieve insert, can be lowered to the floor, rectangular, can be emptied using Venturi technology
Pressure drain
Safety pressure relief valve, fixed at 0.5 bar
Plug nipple for Rectus coupling, type 26, NW 7.2 mm
Overfill protection and probe holder
Solid push handle
2 fixed wheels, 2 castor wheels
Special features
According to the Pressure Vessel Ordinance, the devices are subject to test group 1 (max. pressurisation, e.g. when emptying filled containers, + 0.5 bar)
If the used oil collection devices are emptied via a pipe into an oil collection tank, an overfill protection device must be provided in accordance with the WHG. Regional regulations and guidelines of the countries must be observed.