Skip to main content Skip to search Skip to main navigation
Menu

WABCO Prüfkoffer Druckluftbremsanlagen, 6 Manometer, 6 Prüfschläuche

Description

Scope of delivery

Pressure gauges

  • 5 × pressure gauge (verified), full-scale value 16 bar
  • 1 × pressure gauge (verified), full-scale value 25 bar

Test hoses, approx. 6.5 m each

  • 1 × blue test hose
  • 1 × white test hose
  • 1 × red test hose
  • 1 × green test hose
  • 1 × yellow test hose
  • 1 × violet test hose

Connections and adapters

  • 1 × test connection
  • 3 × double nipples M16 × 1,5 / M16 × 1,5
  • 2 × double nipples M16 × 1,5 / M22 × 1,5
  • 2 × coupling heads with test connection for two-line braking systems
  • 1 × Duo-Matic adapter

Test and additional equipment

  • 1 × three-way valve unit
  • 1 × trailer test unit
  • 1 × Minigrip bag
  • 1 × operating instructions
  • 1 × case including lockable locks

Please note: The pressure gauges included in the case are verified, not calibrated.

Technical data

FeatureValue
ManufacturerWABCO
Product typeTest case for compressed-air braking systems
ApplicationTwo-line compressed-air braking systems in motor vehicles, pneumatic door operating systems, air suspension systems, etc.
16 bar pressure gauge5 units, verified
25 bar pressure gauge1 unit, verified
Test hoses6 units in blue, white, red, green, yellow and violet
Hose lengthapprox. 6.5 m each
Double nipples M16/M163 units
Double nipples M16/M222 units
Coupling heads with test connection2 units, for two-line braking systems
Duo-Matic adapter1 unit
Three-way valve unit1 unit
Trailer test unit1 unit
Caselockable, with locks
Accompanying literatureOperating instructions
Weight17,32 kg

Product description

WABCO test case – functional testing of compressed-air braking systems in accordance with guidelines

The WABCO test case, with its complete equipment, enables compressed-air braking systems to be checked quickly and accurately in accordance with the guidelines. It is a professional, fully equipped solution for workshops, testing centres and fleet operators – not an entry-level set, but a tool for systematic testing.

Six pressure gauges – why this makes a difference

This is the key feature of the case and the reason for its performance: six pressure gauges at the same time.

A commercial vehicle's compressed-air braking system is a branched system with several circuits: front axle circuit, rear axle circuit, trailer control, supply line, parking brake circuit and auxiliary consumers. Functional testing is not about a single reading, but about the interaction between these circuits under dynamic conditions:

  • How quickly do the circuits build up pressure after starting?
  • In what order?
  • How do they behave when braking?
  • Where does pressure drop when it should not?

This cannot be answered with one or two pressure gauges – you would have to reconfigure the setup, and the system condition would be different for each measurement. Six measurement points that can be read simultaneously turn individual readings into an overall picture.

Five at 16 bar, one at 25 bar – there is a reason for this configuration

Most measurement points in a compressed-air braking system are in the range up to 16 bar – five pressure gauges are provided for this.

The 25 bar pressure gauge covers applications with higher pressure levels, such as certain supply pressures, air suspension systems or special applications. A 16 bar instrument would be overloaded in these cases, while a set designed entirely for 25 bar would have a scale that is too coarse in the normal range.

Six colour-coded test hoses, 6.5 metres each

With six parallel measurement points, the colour coding in blue, white, red, green, yellow and violet is not a gimmick but essential for error-free work: anyone routing six hoses around a vehicle needs to be able to see at a glance which pressure gauge is showing which measurement point. Mixing them up leads to incorrect diagnoses – and, in a worst-case scenario, to a functioning valve being removed.

The 6.5-metre length is also designed for practical use: it allows you to reach measurement points on axles, on the trailer and in the cab without having to move the reading point. The tester can position all the pressure gauges centrally and keep them in view at the same time – even with articulated lorries and trailer combinations.

Three-way valve unit – controlled pressurisation

The three-way valve unit allows compressed air to be switched on and off as required and measurement circuits to be isolated. In practice, this means defined test conditions rather than random system states.

This is essential for leak tests: pressurise an isolated section, shut it off and monitor the pressure over time. Without a defined shut-off, it is impossible to tell whether a pressure drop is coming from the section being tested or somewhere else.

Trailer test unit – test the trailer without the towing vehicle

This is an important feature: the trailer test unit allows the braking system of a trailer or semi-trailer to be tested independently – without having to couple it to a towing vehicle and immobilise it.

For workshops, this offers a significant workflow advantage: the trailer can be tested while the tractor unit is in use. For businesses operating swap bodies and semi-trailers, this is often the only practical solution.

Duo-Matic adapter – for couplings without separate heads

Duo-Matic couplings combine the supply and brake lines in a single coupling operation – common on swap bodies, in municipal applications and with certain trailer systems. Without the right adapter, measurements cannot be taken at a Duo-Matic coupling.

The adapter supplied therefore extends the case's range of applications to include a vehicle type that would otherwise be excluded.

Two coupling heads with integrated test connection

The coupling heads replicate the standardised connections of the two-line system – supply line and brake line – and have the test connection already integrated. This allows measurements to be taken between the towing vehicle and trailer without disconnecting lines or stacking adapters.

Five double nipples for M16 and M22

Three double nipples M16 × 1,5 / M16 × 1,5 and two M16 × 1,5 / M22 × 1,5 cover the common connection threads and allow test hoses to be connected to measurement points with different thread sizes.

Beyond braking systems: door operation and air suspension

The case is also specifically designed for pneumatic door operating systems and air suspension systems. This considerably extends its range of applications:

  • Door operating systems – relevant in buses and commercial vehicles, where door controls are safety-critical
  • Air suspension – standard on semi-trailers, buses and modern lorries; ride-height control, axle load distribution and lift axle control operate pneumatically

A business that services these systems does not need a second set of test equipment.

Operating instructions – the know-how behind the tool

The operating instructions supplied document the test procedures. With six parallel measurement points and several brake circuits, a systematic approach is just as important as the equipment – it turns readings into a diagnosis.

Lockable case – organisation and theft protection

The case is fitted with lockable locks. For a test set with six verified pressure gauges and an extensive range of adapters, this is not just a matter of keeping things organised: the contents are valuable, and even one missing adapter can make the entire case unusable in operation.

The Minigrip bag keeps small parts together.

Important: verified, not calibrated

The pressure gauges are verified, but not calibrated. The difference is significant in legal and practical terms:

  • Verified means the measuring instrument meets the statutory requirements for measurement accuracy
  • Calibrated means there is a traceable test report documenting deviations from a reference standard

For maintenance, fault-finding, adjustment work and internal checks, verification is sufficient. Where a traceable calibration certificate is required – for example, at accredited testing centres or in processes subject to documentation requirements – additional calibrated measuring equipment is needed. This should be clarified before use.

17,32 kg – a fully equipped set has its weight

A little over seventeen kilograms is the price of six pressure gauges, six 6.5 m hoses, the trailer test unit and the complete range of adapters. The case is portable, but it is considerably more than a hand case – it is designed for stationary workshop use with occasional relocation.

Points to note

Work on compressed-air braking systems requires appropriate expertise. Before carrying out any work, depressurise the system and secure the vehicle against rolling away. The inspection requirements for braking systems are set out in the relevant regulations and must be observed.

Typical applications

Commercial vehicle workshops and service businesses, trailer and semi-trailer servicing, testing centres and inspection organisations, haulage companies and fleet operators with their own workshops, bus operators and transport companies, municipal services and depots, agricultural machinery and land technology workshops, vehicle construction and body manufacturers, swap body and container logistics, fire service and emergency vehicle engineering, mobile service providers, teaching and training workshops.

Frequently asked questions

What is the test case designed for?
For testing two-line compressed-air braking systems in motor vehicles, pneumatic door operating systems, air suspension systems and comparable pneumatic systems.

Why six pressure gauges?
Because a compressed-air braking system consists of several circuits whose interaction must be assessed under dynamic conditions. Six measurement points that can be read simultaneously provide an overall picture rather than a series of individual readings.

Why five at 16 bar and one at 25 bar?
Most measurement points are in the range up to 16 bar. The 25 bar pressure gauge covers applications with higher pressure levels – a set designed entirely for 25 bar would have a scale that is too coarse in the normal range.

Why are the test hoses colour-coded?
So that, with six hoses routed in parallel, it is always clear which pressure gauge is showing which measurement point. Mixing them up leads to incorrect diagnoses.

Why are the hoses 6.5 m long?
So that measurement points on axles, on the trailer and in the cab can be reached without moving the reading point. All the pressure gauges remain centrally positioned and in view – even with articulated lorries and trailer combinations.

What is the three-way valve unit for?
It allows compressed air to be switched on and off as required and measurement circuits to be isolated – essential for defined test conditions, particularly during leak tests.

What does the trailer test unit do?
It allows the trailer or semi-trailer's braking system to be tested independently, without having to couple it to a towing vehicle. This offers a significant workflow advantage for workshops.

What is the Duo-Matic adapter for?
For vehicles with a Duo-Matic coupling, which combines the supply and brake lines in a single coupling operation. Measurements cannot be taken there without an adapter.

Which connection threads are covered?
M16 × 1,5 and M22 × 1,5 – via three M16/M16 double nipples and two M16/M22 double nipples.

What does “verified, not calibrated” mean?
Verified means the measuring instrument meets the statutory requirements for measurement accuracy. Calibrated means there is a traceable test report documenting deviations. Verification is sufficient for maintenance, fault-finding and internal checks; where a calibration certificate is required, additional calibrated measuring equipment is needed.

Can I also use it to test air suspension systems?
Yes. The case is specifically designed for air suspension systems and pneumatic door operating systems.

Is the case lockable?
Yes, it is fitted with lockable locks.

How heavy is the case?
17,32 kg – the fully equipped set, with six pressure gauges, six hoses and a trailer test unit, is correspondingly heavy.

Who is qualified to work with the case?
Work on compressed-air braking systems requires appropriate expertise. Before carrying out any work, depressurise the system and secure the vehicle against rolling away.

Properties
Artikelart: Bremsleitung, Prüftechnik & Zubehör
Product group: Druckluftbremsanlagen & Zubehör