Turbo filler type 400 - 8"
€1,900.00
Prices exclude VAT.
Free shipping
Available, delivery time: 2-5 days
Product number:
SW13210
Description
Turbo filler type 400 - 8"
Turbo filler for turbo suction arm "Type 400" 8 inch The turbo filler from can be attached to any vacuum drum via the suction flange of the suction slide with 4 screws. It is equipped with an industrial oil motor for continuous high-pressure performance. The suction capacity of the turbo filler is approx. 4000 l/min.
The turbo filler can not only be used for suction, but also for spreading the slurry. The filler presses the slurry into the tank. This means that there is less clogging and the tank is filled up to 100%, even with viscous slurry.
The pump can also be switched on and off while travelling (double bearing, oil motor outside)
Attention: A 100% suction capacity can only be guaranteed if you have at least 50 litres of oil capacity. Incl. hydraulic components Not suitable for docking device!!!
The turbo filler can not only be used for suction, but also for spreading the slurry. The filler presses the slurry into the tank. This means that there is less clogging and the tank is filled up to 100%, even with viscous slurry.
The pump can also be switched on and off while travelling (double bearing, oil motor outside)
Attention: A 100% suction capacity can only be guaranteed if you have at least 50 litres of oil capacity. Incl. hydraulic components Not suitable for docking device!!!