Structure HW80 3.1.2
Description
Structure HW80 3.1.2
Tilting bridge with superstructure 95 / 90 cm high
- Can be tilted to the left (can be tilted to the right on request)
- left-hand sides with longitudinally divided, profiled, laser-welded drop sides,
- the left-hand side is equipped with an upper pendulum dropside and lower dropside
- equipped with hydraulic dropside opening for opening and closing
- Dropside division (bottom/top): 425/500
- The lower 400 mm high dropside is additionally reinforced with a 6 mm thick weld-in profile.
- A 2 mm thick plate is fitted from the inside in the centre bead area.
- The hydraulic dropside opening consists of: 2 hydraulic cylinders with weld-on bolts and 1 set of hydraulic hoses
- The lower dropside is equipped with a lateral guide segment as a boundary at both ends to achieve forced guidance of the load when tipping to a receiving trough.
- lateral guide segment as a boundary.
- This structure is particularly suitable for tipping root crops and grain into receiving troughs.
- The right-hand side wall, the front and rear walls are continuous
- Side wall height: 950 mm on three sides, tipping side 930 mm
- The hinged drop sides are sealed at the side and bottom at the factory
Manufacturer
Conow Anhängerbau
Deutschlands größter Hersteller von HW 60 und HW 80 Anhängern und Aufbauten.