Skip to main content Skip to search Skip to main navigation
Menu

Reifendichtmittel 1 Liter – faserfreies Reifendichtgel für Traktor, LKW, Stapler, Gartengeräte, Fahrräder

Description

Tyre sealant 1 litre – fibre-free puncture protection for all pneumatic tyres

This tyre sealant in a handy 1-litre container reliably seals punctures and leaks between the tyre and rim – permanently, for the entire service life of the tyre. Unlike conventional fibre-based sealants, the gel is completely fibre-free: it is not an adhesive, but a water-soluble liquid containing recycled rubber particles that mechanically seal holes while remaining liquid at all times. This helps you avoid costly downtime in agriculture, construction, forestry and industry.

Your benefits at a glance

  • Fibre-free tyre sealant – outperforms conventional fibre-based sealants in effectiveness and performance
  • Water-soluble liquid containing recycled rubber particles
  • Mechanically seals punctures and leaks between the tyre and rim
  • Effective for the entire service life of the tyre
  • Permanently seals hundreds of holes up to 12 mm in diameter (depending on tyre strength)
  • Helps prevent downtime
  • Reusable
  • Can be used down to -40 °C
  • Non-toxic, non-adhesive and always remains liquid
  • Washes off with water

Applications

Suitable for all pneumatic tyres:

  • Agricultural machinery (tractors, trailers, combine harvesters, forage wagons, etc.)
  • Lorries, construction machinery, industrial and forestry machinery
  • Off-road vehicles, forklift trucks, golf buggies, electric scooters
  • Cleaning equipment, e.g. ride-on scrubber dryers
  • Caravans and trailers
  • Lawnmowers and garden equipment
  • Bicycles and wheelchairs

Application – no additional tools required

No additional equipment is needed to fill the 1-litre container. The valve core tool is included with every bottle.

  1. Position the vehicle or tyre so that the valve is at the 3 or 9 o’clock position. Secure the vehicle to prevent any risk of injury to yourself or others. Always wear safety glasses when filling.
  2. Pull the hose out of the bottle neck as far as it will go.
  3. Remove the valve core and release all the air.
  4. Fit the hose over the valve stem and dispense the required amount using steady pressure.
  5. Refit the valve core and inflate to the specified pressure.
  6. Rotate the wheel or drive the vehicle, then check again and adjust the tyre pressure if necessary.

Please refer to the filling quantity table in the operating instructions for the correct amount for each tyre size.

Technical data

Container1 litre
Typefibre-free, water-soluble, with recycled rubber particles
Sealing capacityHoles up to 12 mm in diameter (depending on tyre strength)
Temperature resistanceCan be used down to -40 °C
Approvalup to 80 km/h
Scope of deliveryBottle incl. filling hose and valve core tool
Weight1,12 kg

Note

The tyre sealant is approved for speeds of up to 80 km/h. Always wear safety glasses when filling and secure the vehicle against rolling away.

Properties
Artikelart: Reifendichtmittel, Reifenmontage, Reifenreparatur
Container: 1 Liter
Product group: Reifenreparatur & -handling, Werkstattbedarf, Werkstattbedarf und Service-Produkte