Rabe Grubber BLUEBIRD GHF 3000 mit Non-Stop-Sicherung, 3 m
€10,890.00
Scope of delivery
- 1 × Rabe cultivator BLUEBIRD GHF 3000
- Two rows of wing shares with non-stop spring protection (7 tines)
- One row of levelling discs (levelling discs)
- Rear roller for depth control and reconsolidation
- Three-point linkage mounting (⚠ please confirm category)
Technical data
| Model | BLUEBIRD GHF 3000 |
|---|---|
| Manufacturer | Rabe Agrartechnik GmbH |
| Product type | Wing-share cultivator / short cultivator (Tine-Disc-Cultivator) |
| Series | BLUEBIRD GH / GHF |
| Working width | 3,00 m (3.000 mm) |
|---|---|
| Transport width | 3,00 m (rigid frame, non-folding) |
| Weight | 1.003 kg (GHF with non-stop protection) |
| Frame | Rigid (non-folding) |
| Tines | 7 in two rows |
|---|---|
| Share type | Wing shares (“Quick-Flow”) |
| Tine protection | Non-stop spring protection (GHF version) |
| Levelling discs | Yes – one row behind the tines |
| Rear roller | Yes – for depth control and reconsolidation (⚠ confirm type and ∅) |
| Working depth | ⚠ Not documented – typically 5–30 cm |
| Minimum tractor power | 150 PS (110 kW) |
|---|---|
| Mounting | Rear three-point linkage (⚠ please confirm category) |
Product description
What the BLUEBIRD GHF does – and why it combines three tools in one machine
The Rabe BLUEBIRD GHF 3000 combines three operations in a single pass:
- Cultivating: Seven wing-share tines in two rows loosen the soil and cut through crop residues
- Levelling: One row of levelling discs closes the furrows and incorporates straw into the topsoil
- Reconsolidating: The rear roller ensures good soil contact and also controls the working depth
Where a cultivator, disc harrow and roller would otherwise make separate passes, the BLUEBIRD does it all in one pass. This saves diesel, time and passes – and reduces soil compaction.
Non-stop spring protection – what the “F” in the name means
The “F” in GHF stands for non-stop spring protection. When it encounters a stone, the tine springs upwards and automatically returns to the working position – without stopping or needing replacement.
The alternative is the GH 3000 with shear-bolt protection: under overload, a bolt breaks and has to be replaced manually. The GH is 252 kg lighter (751 vs. 1.003 kg) and cheaper, but on stony soils you will have to stop more often.
| Feature | GH 3000 (shear bolt) | GHF 3000 (non-stop) |
|---|---|---|
| Tine protection | Shear bolt | Non-stop spring |
| Weight | 751 kg | 1.003 kg |
| Stone obstacle | Bolt breaks → machine stops | Tine springs away → keep working |
| Maintenance | Carry spare bolts | Maintenance-free |
| Recommendation | Stone-free soils, smaller budget | Stony soils, high output |
Who the BLUEBIRD GHF 3000 is designed for
The BLUEBIRD GHF 3000 is aimed at arable farms with tractors from 150 PS that want to:
- Stubble cultivation after cereals, oilseed rape or maize in a single pass
- Primary tillage as an alternative to the plough (conservation, non-inversion)
- Work on stony land and avoid downtime (non-stop)
- Need a compact 3 m machine that can be transported on any farm track without folding
Quick-Flow wing shares – why Rabe makes its own tines
The Quick-Flow tines are designed by Rabe. The wing shares cut across a wide area beneath the soil surface and lift the earth without turning it over. The cutting angles are designed to minimise blockages – even when there is a lot of straw in the field.
With a 3 m working width, the seven tines in two rows achieve a line spacing of approx. 43 cm – sufficient for full-width cultivation with the wide wing shares.
The BLUEBIRD family – all variants at a glance
| Model | Working width | Tines | Protection | Weight | Power | Frame |
|---|---|---|---|---|---|---|
| GHF 3000 | 3 m | 7 | Non-stop | 1.003 kg | 150 PS | Rigid |
| GH 3000 | 3 m | 7 | Shear bolt | 751 kg | 150 PS | Rigid |
| GHF 5000 | 5 m | 11 | Non-stop | 2.086 kg | 210 PS | Folding |
| GH 5000 | 5 m | 11 | Shear bolt | 1.690 kg | 210 PS | Folding |
| GHF 6000 | 6 m | 13 | Non-stop | 2.386 kg | 240 PS | Folding |
| GH 6000 | 6 m | 13 | Shear bolt | 1.918 kg | 240 PS | Folding |
What the BLUEBIRD does not have – and why
The BLUEBIRD has no hydraulic depth adjustment. The working depth is controlled by the rear roller – mechanically, robustly and without hydraulic hoses. This is entirely sufficient for most stubble and primary tillage work.
The BLUEBIRD 3000 has no folding frame. With a 3 m working width, the machine is suitable for road transport without folding. The 5 m and 6 m versions fold down to a transport width of 3 m.
The BLUEBIRD has no seed drill attachment. It is a cultivator/short cultivator only. If you want to sow at the same time, you will need a mounted seed drill or a separate sowing pass.
Frequently asked questions
What is the difference between the BLUEBIRD GH and GHF?
The GH has shear-bolt protection: when it encounters a stone, a bolt breaks and the tine springs away; it must be reset after the bolt is replaced. The GHF has non-stop spring protection: when it encounters a stone, the tine springs away and automatically returns to the working position. The GHF is heavier and more expensive, but significantly more productive on stony soils.
What tractor do I need for the BLUEBIRD GHF 3000?
Rabe recommends at least 150 PS (110 kW). The tractor must have a rear three-point linkage and sufficient lifting capacity for 1.003 kg. On heavy soils and at greater working depths, the drawbar power requirement can be significantly higher than 150 PS.
Can I use the BLUEBIRD for ploughless arable farming?
Yes. The BLUEBIRD is designed for conservation tillage – it loosens the soil, incorporates crop residues and leaves an even, reconsolidated surface. For many crop rotations, it is an alternative to the plough, particularly on erosion-prone sites.
Is the BLUEBIRD GHF 3000 also available with a folding frame?
No. The 3 m version has a rigid frame that does not need to fold – a 3 m working width means a 3 m transport width. Folding frames are available from the 5 m version (GHF 5000).
How quickly do the wing shares wear?
The rate of wear depends greatly on the soil type. Shares last longer in sandy soils, while wear is greater in stony or heavy clay soils. Replacement wing shares are available from Rabe dealers. The shares are bolted on, not welded – they can be replaced without taking the machine to a workshop.
| Cultivation method: | Heckanbau |
|---|---|
| Gerätetyp : | Stoppelgrubber |
| Rahmenausführung: | starr |
| Steinsicherung: | Federsicherung |
| Working width: | 3.00m |