Rabe Frontpacker Pilot FP 900, 15 Ringe, 3,00 m, starrer Rahmen
€9,990.00
Scope of delivery
- 1 × Rabe front packer Pilot FP 900, 15 rings, ø 900 mm, 3,00 m working width, rigid frame
- Parking support
- Transport lock
Note: Depending on the order configuration, the optional front levelling bar (2-row, with tines) is included in the scope of delivery or available separately. Please refer to the order documents for the exact specification.
Technical data
| Manufacturer | Rabe Agrartechnik GmbH (Zoomlion Group) |
|---|---|
| Model range | Pilot |
| Variant | FP 900 – 15/900-300 |
| Design | Front packer (front roller) for three-point front mounting |
| Frame | rigid |
| Number of rings | 15 |
|---|---|
| Ring diameter | ø 900 mm |
| Ring profile (disc angle) | 38° |
| Ring material | Cast iron (presumably spheroidal graphite cast iron / GJS) * |
* Please confirm with the supplier.
| Working width | 3,00 m (300 cm) |
|---|---|
| Ring spacing (approx.) | 20 cm |
| Weight | 1.395 kg |
| Mounting category | Cat. II – front three-point linkage |
| Front levelling bar | optional – 2-row with tines (45 × 12 mm) or Packomat tines (20 mm) |
|---|---|
| Parking support | standard |
| Transport lock | manual |
| Passive steering | with damping system |
Product description
Who this front packer is designed for
The Rabe Pilot FP 900 is a front packer for arable farms that want to reconsolidate the soil while ploughing. It is mounted on the tractor's front three-point linkage while the plough works at the rear. The soil is ploughed and the furrow pressed down again from the front in a single pass – saving a separate pass with the packer, and therefore diesel, time and soil pressure.
Typical combination: Tractor from 180 hp (e.g. John Deere 6R, Fendt 700 Vario, Case IH Puma, Claas Arion 600) with a 4- to 5-furrow mounted reversible plough at the rear and the Pilot FP 900 at the front. If you use a Rabe Albatros or a comparable reversible plough, the front packer gives you a matched system from one supplier.
Why a front packer – and why not a rear packer?
| Feature | Front packer (Pilot FP) | Rear packer (e.g. DR 700/900) |
|---|---|---|
| Position | Tractor front three-point linkage | On the plough frame or rear three-point linkage |
| Use with plough | simultaneous – packing at the front, ploughing at the rear | subsequent – separate pass |
| Additional passes | none – saves one pass | one extra pass |
| Effect on soil pressure | Loads the tractor's front axle, improving traction | no effect on the front axle |
| Direction of operation | packs the soil before the plough turns it | packs the soil after it has been turned |
| Typical use | Reconsolidating the previous year's furrow while ploughing | Seedbed preparation, reconsolidation after ploughing |
Key point: The front packer works on the still unploughed ground ahead of the plough. It presses down stubble or cover crops and breaks up large clods – making it easier for the plough to turn the soil cleanly and improving soil contact in the tilth. The rear packer, by contrast, works on ground that has already been ploughed – the two implements have different functions and complement each other.
900 mm rings – why the larger diameter?
The Pilot FP 900 has rings with a diameter of ø 900 mm – the largest version. The smaller FP 700 uses rings with a diameter of ø 700 mm. A larger diameter means:
- Greater contact area – the ring penetrates less deeply and compacts more evenly. On heavy, wet soils, it rolls over the surface instead of digging in.
- Greater soil flow – crop residues and stubble are less likely to get trapped.
- More weight per ring – an individual 900 mm ring exerts more ground pressure than a 700 mm ring of the same width.
Rule of thumb: The FP 700 is sufficient for light to medium soils. On medium to heavy soils and stubble fields with a lot of plant material, the FP 900 gives better results because it is less likely to ride up.
Ring profile: 38° standard
The ring profile angle is 38°. This is the standard profile for the 900 series. Rabe also offers 900 series front packers with a 50° profile (models with an “S” suffix). Steeper profiles engage the soil more aggressively and break up clods more intensively – but they also require more pulling power and work too deeply on light soils. If in doubt, the 38° standard profile is the more versatile choice.
Rigid frame – and when a folding frame is needed
At a 3,00 m working width, a rigid frame is the right choice: the implement stays within the legal road transport width limit (3,00 m transport width), while a folding frame would only add weight and complexity. From a working width of 4,00 m, Rabe offers hydraulically folding frames – these are essential for road transport.
Where the FP 900 15/900-300 fits in the Pilot range
| Model | Working width | Rings | Frame | Weight |
|---|---|---|---|---|
| FP 900 – 8/900-150 | 1,50 m | 8 | rigid | 855 kg |
| FP 900 – 15/900-300 | 3,00 m | 15 | rigid | 1.395 kg |
| FP 900 – 18/900-350 | 3,50 m | 18 | rigid | 1.750 kg |
| FP 900 – 20/900-400 | 4,00 m | 20 | folding | 2.120 kg |
| FP 900 – 22/900-450 | 4,50 m | 22 | folding | 2.275 kg |
| FP 900 – 30/900-600 | 6,00 m | 30 | folding | 3.015 kg |
Example: The FP 900 15/900-300 offered here, with a working width of 3,00 m and a weight of 1.395 kg, sits in the middle of the rigid models range. It is suitable for 4- to 5-furrow ploughs. If you use a 6-furrow plough with a working width of over 3 m, you need the wider FP 900-350 or a folding FP 900-400.
| Feature | FP 700 (3,00 m) | FP 900 (3,00 m) |
|---|---|---|
| Ring diameter | ø 700 mm | ø 900 mm |
| Ring profile | 35° | 38° |
| Number of rings | 20 | 15 |
| Ring spacing (approx.) | 15 cm | 20 cm |
| Weight | 870 kg | 1.395 kg |
| Suitable for | light to medium soils | medium to heavy soils |
What the Pilot FP 900 does not have – and why
No folding frame: Unnecessary at a working width of 3,00 m – the implement is road-ready as it is. A folding frame would add approx. 150–200 kg and require additional hydraulic lines.
No independent drive: The front packer is a passive implement – it rolls through contact with the soil and the tractor's forward movement. It needs no PTO shaft or hydraulic drive and uses no additional diesel.
No depth control via gauge wheels: The working depth is determined by the implement's own weight and the front linkage setting. On fields with highly variable soil, this can result in uneven working depths – it is sufficient on uniform ground.
Rabe Agrartechnik – background
Rabe was founded in 1889 in Bad Essen and is one of Europe's longest-established manufacturers of soil cultivation equipment. Following its acquisition by Grégoire Besson (2011) and insolvency (2019), the company has been part of ZWL Holding, a subsidiary of the Chinese group Zoomlion, since May 2020. Manufacturing and development remain based in Bad Essen.
Frequently asked questions
What does a front packer do when ploughing?
The front packer runs on the tractor's front three-point linkage while the plough works at the rear. It reconsolidates and levels the unploughed ground ahead of the plough. This breaks up surface clods, presses down stubble and improves the plough's performance – all in one pass, without an additional run.
Will the Pilot FP 900 fit my tractor?
The packer requires a Category II front three-point linkage. Most tractors from around 120 hp have a Category II front linkage as standard – check your tractor's identification plate. The front linkage must have a lifting capacity of at least 1.400 kg to lift the packer safely.
Why use 900 mm rings instead of 700 mm?
Larger rings penetrate less deeply and roll more evenly over the surface. On medium to heavy soils and where there is a lot of plant material (stubble, cover crops), the 900 mm version gives better results. On light soils, the 700 mm version is sufficient and saves weight.
Do I need the optional front levelling bar?
The front levelling bar has 2 rows of tines that loosen the soil and break up large clods ahead of the rings. It is worthwhile on stubble fields with a lot of plant material and on soils prone to forming larger clods. It is not essential on clean stubble fields or where cover crops are growing.
Can I use the front packer without a plough?
Yes. The front packer can be used with any rear-mounted combination – for example, a power harrow or seed drill at the rear. The front roller then levels the ground ahead of the main cultivation operation. It can also be used on its own, for example to reconsolidate the soil after milling or following heavy rainfall.
| Cultivation method: | Frontanbau |
|---|---|
| Gerätetyp : | Frontpacker |
| Rahmenausführung: | starr |
| Working width: | 3.00m |