Rabe Anbaudrehpflug Albatros HA 120 S, 5-furchig (4+1), 93 cm
€28,535.00
Scope of delivery
- 1 × Rabe mounted reversible plough Albatros HA 120 S, 5-furrow (4+1), 93 cm body spacing
Note: Depending on the order configuration, accessories such as disc coulters, skimmers, support wheels and gauge wheels are included in the scope of delivery or available as optional extras. Please refer to the order documents for the exact specification.
Technical data
| Manufacturer | Rabe Agrartechnik GmbH (Zoomlion Group) |
|---|---|
| Model range | Albatros |
| Variant | HA 120 S |
| Type | Mounted reversible plough (fully reversible plough, three-point linkage mounting) |
| Overload protection | Hydraulic non-stop protection (HA) – release force 2.300 kG |
| Number of furrows | 5 (configuration 4+1) |
| Body spacing | 93 cm * |
* The manufacturer's catalogue specifies 100 cm for the 120 series. The value shown here is taken from the product title – please check.
| Frame section | 120 × 120 × 10 mm |
|---|---|
| Headstock diameter | 100 mm |
| Clearance beneath the frame | 80 cm |
| Grädzielmaß (mouldboard carrier) | 70 × 35 mm |
| Working width per body | 35 / 40 / 45 / 50 cm (adjustable) |
|---|---|
| Total working width (5 bodies × 40 cm) | approx. 2,00 m |
| Power requirement | from 180 PS (132 kW) |
| Weight (catalogue figure, 5-furrow) | approx. 1.745 kg |
Product description
Who this plough is designed for
The Rabe Albatros HA 120 S is a mounted reversible plough for arable farms with tractors from 180 PS – machines such as the John Deere 6R 185, Fendt 720 Vario, Case IH Puma 185, Massey Ferguson 7S.180 or Claas Arion 660. The plough is mounted on the three-point linkage, turns hydraulically and sits in the mid-range between lightweight 3-share grassland ploughs and heavy 7-share frame ploughs for over 300 PS.
Typical applications: stubble ploughing, winter ploughing, and incorporating crop residues and cover crops on areas of 50 to 200 ha. If you regularly work in stony soils or on fields with drainage systems and old foundations, the hydraulic non-stop protection is a real benefit – it makes the difference between “stopping briefly to replace a shear bolt” and “carrying on without losing time”.
Hydraulic non-stop protection – what “HA” means
The abbreviation HA stands for Hydraulic release. If a plough body hits an obstacle (a stone, root or forgotten drainage post), it moves upwards once the force exceeds 2.300 kG. After passing the obstacle, the body swings hydraulically back into the working position – without stopping, getting out or needing spare parts.
With the simpler shear-bolt protection (S), a shear bolt does the job. It breaks under overload to protect the frame, but must be replaced by hand. Each release costs 5–15 minutes – on a stony field, that can add up to hours over a season.
| Feature | Shear-bolt protection (S) | Hydraulic release (HA) |
|---|---|---|
| Principle | Shear bolt breaks under overload | Hydraulic cylinder releases at 2.300 kG |
| Reset | Manual – fit a new bolt | Automatic – body swings back |
| Time lost per release | 5–15 minutes | 0 – carry on working |
| Wear parts | Shear bolts (carry spares) | None in normal operation |
| Additional weight compared with base model | – | approx. +325 kg (5-furrow) |
| Suitable for | known, stone-free fields | stony soils, newly rented fields, drainage areas |
120 frame – the mid-range
The 120 × 120 × 10 mm frame section places the Albatros HA 120 S in Rabe's mid-range. It carries up to 5 bodies with up to 200 PS of pulling power. For more bodies or greater power, choose the Super Albatros with a 140 or 160 frame (up to 6 bodies, up to 300 PS).
80 cm of clearance beneath the frame allows crop residues, green material and stubble to pass through instead of blocking the plough – an important detail when incorporating cover crops or taller maize stubble.
Working width – four settings per body
Each body can be set to a working width of 35, 40, 45 or 50 cm. With 5 bodies, this gives a total working width of 1,75 to 2,50 m. Adjustment is mechanical at the body holder. If you want to change the working width hydraulically while moving (for example, to plough out field corners neatly), you need the Vario version V 120 or VHA 120.
Where the Albatros HA 120 S fits in the Rabe plough range
| Variant | Protection | Vario | Bodies | Weight | Power |
|---|---|---|---|---|---|
| Albatros 120 M | Shear-bolt protection | no | 3 / 4 / 5 / 6 | 944–1.667 kg | 130–200 PS |
| HA 120 (MS/S) | Hydraulic (HA) | no | 3 / 4 / 5 | 1.139–1.745 kg | 130–180 PS |
| V 120 M (Variant) | Shear-bolt protection | yes | 3 / 4 / 5 | 1.032–1.523 kg | 130–180 PS |
| VHA 120 MS (Variant) | Hydraulic (HA) | yes | 3 / 4 / 5 | 1.180–1.688 kg | 130–180 PS |
How to read this: The HA 120 S offered here has hydraulic overload protection but no Vario width adjustment. If you want both, choose the VHA 120 – around 57 kg heavier with the same number of bodies, but with the option to adjust the cutting width continuously from 33 to 52 cm per body from the tractor seat.
Rabe frame sizes – guide table
| Frame size | Bodies (max.) | Power range | Typical application |
|---|---|---|---|
| 110 × 110 mm | 5 | 80–150 PS | Grassland, light soils, part-time farms |
| 120 × 120 mm | 6 (S) / 5 (HA) | 130–200 PS | Mainstream arable farms, mixed soils |
| 140 × 140 mm | 6 | 200–260 PS | Large-scale arable farming, heavy soils |
| 160 × 160 mm | 6 | 220–300 PS | Contractors, very heavy soils, high output |
What the Albatros HA 120 S does not have – and why
No Vario width adjustment: The cutting width is adjusted mechanically at the body holder, not hydraulically from the tractor seat. This saves weight and complexity – and most farms set the cutting width once per season and leave it there. If you regularly work on wedge-shaped fields, triangular plots or fields with varying soil conditions, consider the VHA 120 (Vario + hydraulic protection).
Maximum 5 bodies: The 120 frame with HA protection carries up to 5 bodies. The base model 120 M with shear-bolt protection takes up to 6, as the simpler protection system weighs less. If you need 6 bodies with hydraulic protection, you will need to move up to the Super Albatros HA 140 with a 140 frame.
Not a semi-mounted plough: The Albatros is mounted on the three-point linkage – the tractor carries the full weight of the plough when it is lifted. At 1.745 kg in the 5-furrow version, the tractor needs sufficient rear axle load. If you want to reduce the load on the rear axle with the same number of bodies, you need a semi-mounted plough – Rabe does not offer one in this range.
Rabe Agrartechnik – background
Rabe was founded in 1889 in Bad Essen and is one of Europe's longest-established plough manufacturers. Following its acquisition by Grégoire Besson (2011) and insolvency (2019), the company has been part of ZWL Holding, a subsidiary of the Chinese group Zoomlion since May 2020. Manufacturing and development remain based at the Bad Essen site.
Frequently asked questions
What does “HA” mean on the Rabe Albatros?
HA stands for Hydraulic release – an automatic overload protection system. If a plough body hits an obstacle, it moves hydraulically upwards at a force of 2.300 kG and swings back automatically once past the obstacle. Unlike shear-bolt protection, there is no shear bolt to replace.
Which tractors is the Albatros HA 120 S suitable for?
The plough is designed for tractors from 180 PS (132 kW). Typical tractors include the John Deere 6R 185, Fendt 720 Vario, Case IH Puma 185 or Claas Arion 660. The tractor also needs sufficient lifting capacity and rear axle load to lift the approx. 1.745 kg 5-furrow plough safely.
What does “5-furrow (4+1)” mean?
The plough creates a total of 5 furrows. The “4+1” designation describes the body configuration – usually 4 main bodies plus 1 skimmer body or an additional body. Please refer to the order documents for the exact configuration or ask your dealer.
What cutting width can be set?
Each body can be set to a cutting width of 35, 40, 45 or 50 cm. With 5 bodies, this gives a total working width of 1,75 to 2,50 m. Adjustment is mechanical at the body holder.
What is the difference between the Albatros 120 M and HA 120 S?
The 120 M has shear-bolt protection (the shear bolt breaks under overload), while the HA 120 S has hydraulic non-stop protection (the body moves hydraulically out of the way and returns automatically). The HA 120 S weighs approx. 325 kg more, but saves considerable time and hassle on stony soils.
| Anzahl Furchen : | 5 |
|---|---|
| Cultivation method: | Heckanbau |
| Gerätetyp : | Drehpflug |
| Körperabstand: | 93cm |
| Schnittbreitenverstellung : | mechanisch, mehrstufig |
| Steinsicherung: | Hydraulische Non-Stop-Steinsicherung |