PRONAR Tandem-Muldenkipper 16,2 t, 13,2 m³, Mulde 1,2 m, 40 km/h
€21,280.00
Standard equipment
- Tandem chassis with rigid axles and parabolic suspension, axle spacing 1.325 mm
- Hydraulic tailgate with automatic locking and rubber seal
- Universal drawbar for low and high hitching, with fixed towing eye Ø 40
- Hydraulic angled support leg
- Two-line compressed-air braking system, drum brakes 400 × 80 mm
- Hand-crank brake
- LED lighting system with side marker lights; rear lights with protective grille
- Front wall with mesh viewing window and PLEXI pane
- Grain outlet in the rear wall
- Access ladder and steps
- Plastic mudguards at the front and rear, metal mudguards above
- Rear underrun protection, type-approved and foldable
- Wheel chocks with holder
- Paint finish: red chassis RAL 3000, green sides RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Tandem tipping trailer, rear tipper |
| Permissible gross weight | 16.200 kg |
| Unladen weight | 4.200 kg |
| Payload | 12.000 kg |
| Load volume | 13,2 m³ (19,4 m³ with extensions) |
| Internal body dimensions L × W | 4.800 × 2.140 – 2.200 mm |
| Overall dimensions L × W × H | 6.797 × 2.550 × 2.460 mm |
| Side height | 1.200 mm |
| Sheet thickness, floor / sides | 4 / 4 mm |
| Platform height | 1.260 mm |
| Track width | 1.960 mm |
| Suspension | Parabolic suspension |
| Drawbar load | 1.950 kg |
| Tyres | 385/65 R 22,5 RE |
| Permissible speed | 40 km/h |
| Tipping system | rear tipping, tipping angle 50° |
| Telescopic cylinder | Stroke 1.700 mm, oil requirement 13 l, operating pressure 200 bar |
| Required tractor power | 83,2 PS / 61 kW |
Note: All parameters listed apply to individual approval in Germany.
Product description
Tandem rear tipper with 12-tonne payload
The sprung twin-axle trailer carries 12.000 kg and holds 13,2 m³ – without extensions. The body is 1.200 mm high; the tailgate opens hydraulically and locks automatically.
1.200 mm body – the difference from the standard version
The T679 in the same range has a side height of 1.000 mm and holds 10,3 m³. This one is 200 mm higher, giving it a capacity of 13,2 m³.
What the higher sides offer:
- 13,2 m³ without extensions. Enough for beet, potatoes and soil, without needing to fit extensions.
- A more rigid body. A continuous 1,2 m wall made from 4-mm sheet is stiffer than a low wall with an extension frame fitted on top.
- More secure containment. No gap between the body and extension for fine material to escape through.
It also offers a higher carrying capacity: 16.200 rather than 16.000 kg permissible gross weight and 12.000 rather than 12.000 kg payload – with a larger volume at the same time.
12.000 kg at 13,2 m³
This ratio gives a calculated limit of around 0,9 t/m³.
- Beet, potatoes, soil (0,8 – 1,3 t/m³) – the payload limit is reached before the volume limit. The standard configuration is suitable.
- Grain (0,7 – 0,8 t/m³) – both limits are reached at roughly the same time.
- Maize, silage, wood chips – here, volume is the limiting factor, and the extensions increase capacity to 19,4 m³.
Extensions with folding side panels
A well-thought-out detail: The optional 600-mm extensions have hinges that allow the side extensions to be folded down.
Why this matters in everyday use: At an overall height of 1,8 m, loading from a forage harvester becomes difficult, and the trailer will no longer fit through low sheds. When folded down, the height remains manageable without having to remove the extensions.
The front extension has a viewing window made from mesh with a PLEXI pane.
Hydraulic tailgate with rubber seal
The tailgate is raised hydraulically and locks automatically – the driver can remain seated.
What this saves in everyday use: With a mechanically locked tailgate, the driver gets out before every tip, unlocks it and climbs back on – then gets out again after tipping to lock it.
The rubber seal keeps fine materials in. With grain, compost and damp material, it makes the difference between a secure load and a trail on the road.
Universal drawbar for high and low hitching
The drawbar with fixed towing eye Ø 40 is designed for low and high hitching.
Why this makes it versatile: The trailer is suitable for tractors with a Hitch coupling as well as those with a drawbar hitch at chassis height – without modification. A K80 ball coupling is available as optional equipment.
Hydraulic angled support leg as standard
With a drawbar load of 1.950 kg, a mechanical support leg is hard work when the trailer is loaded.
LED lighting as standard
LED lights have no filaments that can break due to vibration – a practical advantage on a trailer that travels over farm tracks and cobbled roads.
Three-stage braking system
Standard equipment includes a two-line compressed-air braking system with 400 × 80 mm drum brakes and a hand-crank brake. Optional ALB or ALB Premium.
Why ALB is useful: The trailer weighs 4,2 tonnes empty and 16,2 tonnes loaded – almost four times as much. Without load-dependent control, the wheels lock when empty. ALB is also part of the package for EU type approval.
Grain outlet and viewing window
- The grain outlet in the rear wall allows grain to be discharged in a controlled way without opening the entire tailgate.
- The viewing window in the front wall shows the fill level while travelling – the only practical way to check it with 1,2 m-high sides.
Approval
| Approval route | Permissible gross weight | Payload |
|---|---|---|
| Individual approval DE | 16.200 kg | 12.000 kg |
| EU type approval, 40 km/h | 14.000 kg | approx. 9.800 kg |
The difference is 2.200 kg – in return, the EU version allows a drawbar load of 2.000 kg instead of 1.950 kg.
Optional equipment
- AT or EU type approval, including documents
- K80 ball coupling
- Two-line compressed-air braking system with ALB or ALB Premium
- 600 mm extensions with viewing window and folding side extensions for 19,4 m³
- Discharge chute
- Rear connections for electrics, hydraulics and pneumatics
- Trailer couplings from various manufacturers
- Toolbox
- Side underrun protection
- Spare wheel, plastic tube for vehicle documents
- Warning triangle for slow-moving trailers
Applications
Agriculture and harvesting, potato and beet harvesting, agricultural contractors, biogas plants, gardening and landscaping, local authorities and public works departments, construction.
Operating notes
- Confirm the approval route before ordering – there is a 2.200 kg difference between individual approval and EU type approval.
- Check the towing vehicle's drawbar load: up to 1.950 kg.
- Tip on level, firm ground.
- Do not raise the body beneath overhead power lines.
- Before tipping, check that the tailgate can open freely.
- After unloading, check that the body is empty.
- Check the rubber seal on the tailgate regularly.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
Frequently asked questions
How much does the tipper hold?
13,2 m³ without extensions and 19,4 m³ with the optional 600-mm extensions.
How much can it carry?
12.000 kg with a permissible gross weight of 16.200 kg. With EU type approval, the permissible gross weight is 14.000 kg.
What distinguishes the M version?
The higher body: 1.200 mm instead of 1.000 mm on the standard model. This gives it a capacity of 13,2 rather than 10,3 m³ without extensions – and a higher carrying capacity too.
What is special about the extensions?
They have hinges that allow the side extensions to be folded down. This reduces the overall height without having to remove the extensions. The front extension also has a viewing window.
Is the tailgate hydraulic?
Yes, as standard – with automatic locking and a rubber seal. The driver does not need to get out to open or lock it.
Will the trailer fit my tractor?
The universal drawbar is designed for low and high hitching. The tractor must provide 83,2 PS or 61 kW and have a coupling suitable for a drawbar load of 1.950 kg.
How far does the body tip?
50° to the rear.
How can I see the fill level?
Through the mesh viewing window with PLEXI pane in the front wall – the only practical way to check while travelling with 1,2 m-high sides.