PRONAR Dreiseitenkipper Tandem, 16,2 t, Palettenbreite, 15,4 m³

Standard equipment

• Three-sided central locking
• Tipping direction selected using two pins with safety system
• 800 mm extensions
• Sideboards with tension cables; sideboards and extensions prepared for optional tension bars
• Drawbar with fixed towing eye Ø 40
• Hydraulic angled support leg
• Dual-line compressed-air brakes, 400 × 80 mm drum brakes, axle spacing 1.325 mm
• Handbrake
• 12 V LED lighting system with rear socket, sealed connections and side marker lights; rear lights with protective grille
• Grain outlet in the rear wall
• Access ladder and steps
• Rear connections for electrics, hydraulics and pneumatics
• Body support for maintenance work
• Mudguards on the rear axle
• Wheel chocks with holder
• Paint finish: chassis black grey RAL 7021, sideboards green RAL 6010

Technical data

Note: All listed parameters apply to individual approval in Germany.

Product description

12 tonnes of payload over an overall length of 6.1 m

The sprung tandem carries 12.000 kg and holds 15,4 m³ on a body with an internal width of 2.420 mm. It tips to the rear and to either side – while remaining shorter than 6,2 m.

15,4 m³ over 6,1 m – the combination makes the difference

The proportions are remarkable. For comparison: The PT612L from the same range holds the same volume, but measures 7.420 mm – almost 1,3 m longer.

The reason is the sideboard height: 600 + 800 mm gives a body height of 1,4 m. This adds volume without making the trailer longer.

• Manoeuvrable on tight farmyards and in narrow access roads.
• Fits where longer trailers cannot manoeuvre.
• Still offers 12 tonnes of payload and 15,4 m³.

Pallet width – what this means in practice

With an internal width of 2.420 mm, Euro pallets fit across the trailer.

Why this makes the trailer versatile: It is both a tipper and a pallet transporter. Seed, fertiliser, planting stock and building materials arrive on pallets – and would otherwise need a second trailer.

12.000 kg at 15,4 m³

This ratio gives a calculated limit of around 0,78 t/m³.

• Grain (0,7 – 0,8 t/m³) – payload and volume reach their limits at the same time. That is the optimum configuration.
• Sugar beet and potatoes – here, the payload limit is reached first.
• Maize and silage – here, volume is the limiting factor, and the optional intermediate extensions provide extra capacity.

800 mm extensions included as standard

This differs from many models in the range, where extensions are optional equipment.

Three options are available:

• Standard: 600 mm sideboards + 800 mm extensions
• 600 mm extensions instead of 800 mm – for a lower body
• 800 mm sideboards instead of 600 mm – giving 800 + 800 mm

Important for the last option: It is only available with tension cables and excludes EU type approval.

Additional 600 mm intermediate extensions are also available.

LED lighting with sealed connections

A detail that sets this model apart from many of its sister models.

Why it matters: Trailer lighting almost always fails at the plugs and cable connections, not at the lights themselves. Moisture, dirt and salt get into the contacts. Sealed connections keep them out – and LED lights have no filaments that can break due to vibration.

5 mm floor

One step thicker than on the smaller models in the range. The floor takes the impact during loading – gravel from the loader bucket, beet stones, pallet feet.

Up to three grain outlets

One grain outlet is fitted in the rear wall as standard. Two or three are available as options.

Why multiple outlets are useful: With a body width of 2,42 m, grain flows unevenly from a single outlet – faster in the middle than at the edges. Multiple outlets distribute the flow and speed up unloading.

Fold-down side sheet chutes

Optional fold-down sheet chutes running the full length are available – on the left, right or both sides.

What they are for: When tipping to the side, they direct the material where it is needed and prevent it from running along the frame or getting underneath the trailer. They do not get in the way when folded up.

Tension cables or tension bars

Tension cables are fitted as standard. The sideboards and extensions are prepared for tension bars – switching over costs nothing extra.

The difference: Tension bars are rigid and provide defined stops – making them the better choice for pallet transport and general cargo. Tension cables, by contrast, sag.

Hydraulic angled support leg included as standard

With a drawbar load of 1.950 kg, a mechanical support leg is hard work when the trailer is loaded.

Three-way tipper – the everyday advantage

A rear tipper needs space behind it and a pile in the direction of travel. A three-way tipper unloads wherever the material needs to go – to the side into a heap, into a ditch or against a wall.

50° to the rear and 46° to the side – the tipping direction is selected using two pins with a safety system.

Approval

The difference is 2.260 kg – in return, the EU version allows a drawbar load of 2.000 kg instead of 1.950 kg. Please note: EU type approval is not possible with 800 mm sideboards.

Optional equipment

• EU or AT type approval, including documents
• K80 ball hitch
• Dual-line compressed-air brakes with ALB or ALB Premium
• 800 mm sideboards instead of 600 mm (tension cables only; no EU type approval)
• 600 mm extensions instead of 800 mm
• Additional 600 mm intermediate extensions
• Tension bars instead of tension cables (no extra charge)
• 340 × 710 mm window with grille and PLEXI pane
• Sideboard lifting springs
• Roll-over cover with folding frame and platform
• Two or three grain outlets in the rear wall
• Discharge chute, rear sheet chute across the full width
• Fold-down side sheet chutes, left, right or both sides
• Drop sheets, 2 sets (only with extensions)
• Grain unloading auger with 30 t/h capacity (on request)
• Sideboard hoops for transporting bales (not for public roads)
• Trailer couplings in various designs
• Side underrun protection
• Plastic mudguards on the front axle
• Spare wheel
• Slow-moving vehicle warning triangle

Applications

Agriculture and harvesting, agricultural merchants and seed logistics, agricultural contractors, garden centres and nurseries, landscaping, local authorities and public works departments, building materials merchants, businesses with narrow farmyard entrances.

Operating notes

• Confirm the approval route before ordering – there is a 2.260 kg difference between individual approval and EU type approval.
• EU type approval is not possible with 800 mm sideboards.
• Check the towing vehicle's drawbar load capacity: up to 1.950 kg.
• When transporting pallets, ensure the load is adequately secured – the sideboards alone are not sufficient.
• Before tipping, check the locking mechanism on the relevant side and secure the tipping direction using the pins.
• When tipping to the side, use level, firm ground – with a body height of 1,4 m, the centre of gravity is high.
• Do not raise the body beneath overhead power lines.
• Fold up the side sheet chutes before travelling on the road.
• The body support is intended exclusively for maintenance work.
• Retighten the wheel nuts after the first few hours of operation and regularly thereafter.

Frequently asked questions

Do Euro pallets fit across the body?

Yes. With an internal width of 2.420 mm, two Euro pallets fit side by side across the body – two times 1.200 mm equals 2.400 mm. Alternatively, three pallets fit lengthways.

How much can the tipper carry?

12.000 kg with a permissible gross weight of 16.260 kg. With EU type approval, the permissible gross weight is 14.000 kg.

How does the trailer manage 15,4 m³ in a length of just 6,1 m?

It is achieved through the body height: 600 mm sideboards plus 800 mm extensions give a height of 1,4 m. This adds volume without making the trailer longer.

What sideboard and extension options are available?

Standard equipment is 600 mm sideboards with 800 mm extensions. Alternatively, choose 600 mm extensions or 800 mm sideboards – the latter are only available with tension cables and without EU type approval. Additional intermediate extensions are also available.

What are the benefits of sealed connections?

Trailer lighting almost always fails at plugs and cable connections because moisture, dirt and salt get into the contacts. Sealed connections keep them out.

Why have multiple grain outlets?

With a body width of 2,42 m, grain flows unevenly from a single outlet. Two or three outlets distribute the flow and speed up unloading.

What tractor do I need?

84 PS or 61,7 kW, and a coupling rated for a drawbar load of 1.950 kg. Tipping requires 18 litres of oil at 200 bar.

How far does the body tip?

50° to the rear and 46° to the side. The tipping direction is selected using two pins with a safety system.