PRONAR Dreiseitenkipper 2-Achs, 8 t zGG, 5,7 t Nutzlast, 40 km/h
€10,355.00
Standard equipment
- Central locking on three sides
- 500 mm sideboards with tension cables
- Tipping direction selected using two pins with safety system
- Y-shaped drawbar with fixed towing eye Ø 40
- Dual-line air brakes, 300 × 90 mm drum brakes
- Handbrake
- 12 V lighting system, rear lights with protective grilles
- Grain outlet in the rear panel
- Access ladder and steps
- Body support for maintenance work
- Mudguards on the rear axle
- Rear underrun protection, type-approved
- Wheel chocks with holder
- Paint finish: red chassis RAL 3000, green sideboards RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Two-axle three-way tipper |
| Permissible gross weight | 8.000 kg |
| Unladen weight | 2.280 kg |
| Payload | 5.720 kg |
| Load volume | 4,9 m³ (with sideboard height of 500 + 500 mm) |
| Internal body dimensions L × W | 4.440 × 2.190 – 2.240 mm |
| Overall dimensions L × W × H | 6.590 × 2.390 × 2.160 mm |
| Sideboard height | 500 mm |
| Sheet thickness, floor / sideboard | 4 / 2 mm |
| Platform height | 1.130 mm |
| Track width | 1.730 mm |
| Suspension | Parabolic suspension |
| Tyres | 11,5/80-15,3 |
| Permissible speed | 40 km/h |
| Tipping system | three-way |
| Tipping angle, rear / side | 50 / 46° |
| Telescopic ram | Stroke 1.700 mm, oil requirement 13 l, operating pressure 200 bar |
| Required tractor power | 46,8 PS / 34,4 kW |
Note: The stated volume applies to the version with additional 500-mm extensions. All listed parameters apply to individual approval in Germany.
Product description
The affordable entry point to the T672 range
The suspended two-axle trailer carries 5.720 kg and tips to the rear and to either side. It comes as standard with a top speed of 40 km/h and requires just 46,8 PS of tractor power.
Large body, low gross weight
That is the design concept behind the ECO version: it has the same body dimensions as the larger models in the range – 4.440 × 2.190 mm – but a considerably lower permissible gross weight.
Who is it suitable for?
- Large quantities of lightweight goods – green waste, leaves, wood chips, straw. In these cases, volume is the limiting factor, not weight.
- Farms with a small tractor – 46,8 PS instead of 62,4 PS for the T672.
- Local authorities and municipal depots with mixed vehicle fleets.
Just 46,8 PS – suitable for almost any tractor
Its power requirement is comparable to that of a single-axle tipper. This means the trailer can be used behind tractors in the 50-PS class – while still offering 5,7 tonnes of payload.
The tipping function requires 13 litres of oil at 200 bar.
Two axles – no nose weight on the tractor
The tandem carries its own weight instead of transferring some of it to the tractor's towing hitch.
Why this matters with small tractors: Nose weight loads the rear axle and unloads the front axle, reducing steering ability. This is quickly noticeable with a compact tractor.
The parabolic suspension also protects the load, chassis and driver.
40 km/h as standard
The 40 km/h version is standard – with no extra charge and no reduction in permissible gross weight.
Even with EU type approval the gross weight remains 8.000 kg. The EU version also includes the ALB and a lighting system with side marker lights.
Three extension options
| Configuration | Typical loads |
|---|---|
| 500 mm sideboards (standard) | Gravel, sand, soil – weight is the limiting factor here |
| + 500 mm extensions = 4,9 m³ | Grain, potatoes, sugar beet |
| 1.000 mm mesh extensions | Green waste, leaves, wood chips |
The figures behind it: 5,7 tonnes of gravel takes up just over 3,5 m³ – with heavy materials, the payload limit is reached long before the volume limit. For lightweight loads, the mesh extensions provide the extra capacity that makes all the difference.
The mesh extensions are available with a mesh size of 8 mm or 30 mm. The finer version also retains leaves and chippings – making it the right choice for local authorities and landscaping businesses.
Tension cables as standard
The standard sideboards come with factory-fitted tension cables. They hold the sideboards at a set angle when tipping, rather than allowing them to swing freely – protecting the hinges and sideboards.
The optional extensions also come with tension cables.
Three-way tipper – the everyday advantage
A rear tipper needs space behind it and a pile in the direction of travel. A three-way tipper unloads wherever the material needs to go – to the side into a windrow, into a ditch or against a wall, without manoeuvring.
50° to the rear and 46° to the side – the tipping direction is selected using two pins with a safety system.
Central locking on three sides
Each side is secured with a single handle instead of several separate catches. Forgotten catches are one of the most common reasons for sideboards opening while travelling.
Grain outlet as standard
Grain can be discharged in a controlled manner without opening the entire rear panel. A discharge chute and a full-width sheet-metal slide at the rear are available as optional equipment.
Three brake options
Standard equipment includes dual-line air brakes with 300 × 90 mm drum brakes and a handbrake. Optional ALB or ALB Premium.
Why ALB is useful: The trailer weighs 2,3 tonnes when empty and 8 when loaded – more than three times as much. Without load-dependent control, the wheels lock when empty. ALB is included in the EU type approval package in any case.
Overrun brake as an alternative
The manufacturer also offers the ECO version with an overrun brake.
What this makes possible: The tipper can then be used behind any vehicle with a towing hitch, even without a brake connection. Pick-ups, Unimogs, older tractors and municipal vehicles are all suitable.
Additional equipment
- EU or AT type approval, including documents
- Dual-line air brakes with ALB or ALB Premium
- 500 mm extensions with tension cables
- 1.000 mm mesh extensions with 8 mm or 30 mm mesh size
- Sideboard lifting springs
- Roll-over cover with folding frame and platform
- Rear connections for electrics, hydraulics and pneumatics
- Discharge chute, full-width sheet-metal slide at the rear
- Drop-down tarpaulins, 2 sets (only with extensions)
- Grain unloading auger, 30 t/h (on request)
- Sideboard hoops for transporting bales (not for use on public roads)
- Various types of towing hitch
- Plastic mudguards behind the front axle and in front of the rear axle
- Spare wheel holder and spare wheel
- Warning triangle for slow-moving trailers
Applications
Part-time farms and hobby farming, landscaping, local authorities and municipal depots, riding schools and equestrian businesses, nurseries and tree nurseries, clubs, property maintenance services, forestry businesses.
Operating notes
- Confirm the approval route before ordering.
- Before tipping, check that the relevant side is unlocked and secure the tipping direction using the pins.
- When tipping to the side, ensure the ground is level and firm.
- Do not raise the body beneath overhead power lines.
- The body support is intended exclusively for maintenance work.
- Sideboard hoops for transporting bales are not suitable for use on public roads.
- The spare wheel holder and platform cannot be fitted together.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
Frequently asked questions
How much can the tipper carry?
5.720 kg with a permissible gross weight of 8.000 kg – this remains the same even with EU type approval.
What tractor do I need?
46,8 PS or 34,4 kW. Tipping requires 13 litres of oil at 200 bar.
What distinguishes the ECO version?
It has a lower permissible gross weight but the same body dimensions as the larger models in the range. It requires just 46,8 PS instead of 62,4 PS, and is considerably cheaper.
Does the tipper travel at 40 km/h?
Yes, as standard – with no extra charge and no reduction in permissible gross weight.
How do I get 4,9 m³?
The stated volume applies to the version with additional 500-mm extensions. The standard sideboards are 500 mm high.
What are mesh extensions for?
They increase the volume for lightweight materials such as green waste, leaves and wood chips. Available with 8 mm or 30 mm mesh size – the finer version also retains leaves.
How far does the body tip?
50° to the rear and 46° to the side. The tipping direction is selected using two pins with a safety system.
Is a version without air brakes available?
Yes, the ECO version is also available with an overrun brake. The tipper can then be used behind any vehicle with a towing hitch.