PRONAR Dreiseitenkipper 2-Achs, 16,3 t, Palettenbreite, 15,4 m³
€15,750.00
Standard equipment
- Three-sided central locking
- Tipping direction selected using two pins with safety system
- Sideboards with tension cables; sideboards and extensions prepared for optional tension bars
- Y-shaped drawbar with fixed towing eye Ø 40
- Two-line compressed-air braking system, drum brakes 400 × 80 mm
- Handbrake
- 12 V lighting system with rear lights
- Grain outlet in the rear wall
- Access ladder and steps
- Rear connections for electrics, hydraulics and pneumatics
- Mudguards on the rear axle
- Rear underrun protection, type-approved
- Wheel chocks with holder
- Paint finish: chassis black grey RAL 7021, sideboards green RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Two-axle three-way tipper, pallet width |
| Permissible gross weight | 16.300 kg |
| Unladen weight | 4.165 kg |
| Payload | 12.135 kg |
| Load volume | 15,4 m³ (with 600 + 800 mm sideboard height) |
| Internal platform dimensions L × W | 4.545 × 2.420 mm |
| Overall dimensions L × W × H | 6.720 × 2.550 × 2.720 mm |
| Sideboard height | 600 mm |
| Sheet thickness, floor / sideboard | 5 / 2,5 mm |
| Platform height | 1.270 mm |
| Track width | 1.900 mm |
| Suspension | Parabolic suspension |
| Tyres | 385/65 R 22,5 RE |
| Permissible speed | 40 km/h |
| Tipping system | three-way |
| Tipping angle, rear / side | 50 / 46° |
| Telescopic ram | Stroke 1.980 mm, oil requirement 18 l, operating pressure 200 bar |
| Required tractor power | 89 PS / 65,7 kW |
Note: All listed parameters apply to individual approval in Germany.
Product description
Pallet-width three-way tipper with 12,1 t payload
This suspended two-axle trailer carries 12.135 kg on a platform with an internal width of 2.420 mm. It tips to the rear and to either side, has a standard road speed of 40 km/h and can be configured in four body variants.
Pallet width – what that means in practice
At an internal width of 2.420 mm, Euro pallets fit crosswise.
| Arrangement | Space required | Fits? |
|---|---|---|
| 2 pallets crosswise (1.200 mm each) | 2.400 mm | yes |
| 3 pallets lengthways (800 mm each) | 2.400 mm | yes |
Why this makes the trailer versatile: It is both a tipper and a pallet transporter. Seed, fertiliser, planting stock and building materials are delivered on pallets – otherwise they would need a second trailer.
Four body variants – the special feature
No other model in the range offers so many combinations:
| Body configuration | Overall height | Typical loads |
|---|---|---|
| 600 mm sideboards (standard) | 600 mm | Gravel, soil, pallets |
| + 600 mm extensions | 1.200 mm | Sugar beet, potatoes |
| + 800 mm extensions = 15,4 m³ | 1.400 mm | Grain, maize |
| + intermediate extensions (600 + 600 + 600) | 1.800 mm | Silage, wood chips |
Also available: 800 mm sideboards instead of 600 mm – but only with tension cables.
What this means in practice: The body can be tailored to the material the farm actually transports. With heavy loads, the loading edge stays low; with lighter loads, the volume can be increased.
12.135 kg at 15,4 m³
This ratio gives a calculated limit of around 0,79 t/m³.
- Grain (0,7 – 0,8 t/m³) – payload and volume reach their limits at the same time. This is the optimum configuration.
- Sugar beet and potatoes – the payload limit is reached first.
- Maize and silage – volume is the limiting factor, and the third extension level provides the extra capacity.
Hydraulically opening sideboards as an option
The most interesting equipment option on this model: the left-hand sideboard, the right-hand sideboard or both can be opened hydraulically.
What this saves in everyday use: With a conventional three-way tipper, the driver gets out before every side tip, unlocks the sideboard and climbs back on. At twenty loads a day, that means getting on and off forty times.
For operators who tip to the side frequently – local authorities spreading grit, or contractors filling silage clamps – this quickly pays off.
Fold-down side sheet chutes
As optional equipment, fold-down sheet chutes running the full length are available – on the left, right or both sides.
What they are for: When tipping to the side, they direct the material precisely and prevent it from running along the frame or getting underneath the trailer. They do not get in the way when folded up.
5 mm floor
One step thicker than on the smaller models in the range. The floor withstands the impact during loading – gravel from a loader bucket, beet stones, pallet feet.
Tension cables or tension bars
Tension cables are fitted as standard. The sideboards and extensions are prepared for tension bars – switching over costs no extra.
The difference: Tension bars are rigid and provide defined stops – making them the better choice for pallet transport and general cargo. Tension cables, by contrast, sag.
Approval without loss of payload
Noteworthy: Even with EU type approval, the permissible gross weight remains 16.300 kg. The EU version also comes with reinforced 400 × 120 mm drum brakes.
This is unusual for PRONAR – with many models, the approval route costs 1.000 to 5.000 kg of payload.
Ready for towing another trailer
Rear connections for electrics, hydraulics and pneumatics are included as standard. This allows a second trailer to be attached – towing hitches are available as optional equipment.
Three-way tipper – the everyday advantage
A rear tipper needs space behind it and a pile in line with the direction of travel. A three-way tipper unloads where the material needs to go – to the side into a clamp, into a ditch or against a wall.
50° to the rear and 46° to the side – the tipping direction is selected using two pins with a safety system.
Additional equipment
- EU or AT type approval, including documents
- Two-line compressed-air braking system with ALB or ALB Premium
- 600 mm or 800 mm extensions
- Additional 600 mm intermediate extensions
- 800 mm sideboards instead of 600 mm (tension cables only)
- Tension bars instead of tension cables (no extra charge)
- Left-hand, right-hand or both sideboards hydraulically opening
- 340 × 710 mm window with grille and PLEXI pane
- Sideboard lifting springs
- Roll-over cover with folding frame and platform
- Discharge chute, rear sheet chute across the full width
- Fold-down side sheet chutes, left, right or both sides
- Drop sheets, 2 sets (extensions required)
- Grain unloading auger, 30 t/h (on request)
- Sideboard hoops for transporting bales (not for public roads)
- Towing hitches from various manufacturers
- Toolbox
- Side underrun protection
- Plastic mudguards behind the front axle and in front of the rear axle
- Spare wheel winch with crank under the chassis, spare wheel
- Slow-moving vehicle warning triangle
Applications
Agriculture and harvesting, agricultural merchants and seed logistics, agricultural contractors, nurseries and tree nurseries, landscaping, local authorities and public works depots, building materials merchants, construction.
Operating notes
- Confirm the approval route before ordering.
- Extensions are not standard equipment – the 800 mm extensions must be ordered to achieve 15,4 m³.
- Ensure the load is adequately secured when transporting pallets – the sideboards alone are not sufficient.
- Before tipping, check that the relevant side is unlocked and secure the tipping direction using the pins.
- When tipping to the side, ensure the ground is level and firm – with three extension levels, the centre of gravity is high.
- Do not raise the platform beneath overhead power lines.
- Fold in the side sheet chutes before travelling on the road.
- 800 mm sideboards are only available with tension cables.
- Sideboard hoops for transporting bales are not suitable for public roads.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
Frequently asked questions
Do Euro pallets fit crosswise on the platform?
Yes. At an internal width of 2.420 mm, two Euro pallets fit side by side crosswise – two times 1.200 mm equals 2.400 mm. Alternatively, three pallets fit lengthways.
How much can the tipper carry?
12.135 kg with a permissible gross weight of 16.300 kg – this remains the same even with EU type approval.
Are the extensions included in the price?
No. The basic version has a sideboard height of 600 mm; the 800 mm extensions, listed as optional equipment, are required for the stated 15,4 m³.
What body variants are available?
600 mm sideboards as standard, plus 600 or 800 mm extensions, additional intermediate extensions for three levels, and 800 mm sideboards instead of 600 mm – the latter are only available with tension cables.
Can I open the sideboards hydraulically?
Yes, as optional equipment – either on the left, right or both sides. The driver then no longer needs to get out to unlock them.
Will I lose payload with EU type approval?
No. The permissible gross weight remains 16.300 kg, and the EU version also comes with reinforced 400 × 120 mm drum brakes.
What tractor do I need?
89 PS or 65,7 kW. Tipping requires 18 litres of oil at 200 bar.
How far does the platform tip?
50° to the rear and 46° to the side. The tipping direction is selected using two pins with a safety system.