PRONAR Dreiseitenkipper 2-Achs, 14,2 t, Palettenbreite, 40 km/h
€15,310.00
Standard equipment
- Three-sided central locking
- Tipping direction selected using two pins with safety system
- Side panels with tension cables; side panels and extensions prepared for optional tension bars
- Y-shaped drawbar with rigid towing eye Ø 40
- Two-line compressed-air braking system, drum brakes 400 × 80 mm
- Handbrake
- 12 V lighting system with rear lights
- Grain outlet in the rear panel
- Access ladder and steps
- Rear connections for electrics, hydraulics and pneumatics
- Manual, sprung trailer coupling
- Mudguards on the rear axle
- Rear underrun protection, type-approved
- Wheel chocks with holder
- Paint finish: chassis black grey RAL 7021, side panels green RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Two-axle three-way tipper, pallet width |
| Permissible gross weight | 14.200 kg |
| Unladen weight | 3.910 kg |
| Payload | 10.290 kg |
| Load volume | 13,2 m³ (with side panel height 600 + 600 mm) |
| Internal platform dimensions L × W | 4.545 × 2.420 mm |
| Overall dimensions L × W × H | 6.720 × 2.550 × 2.520 mm |
| Side panel height | 600 mm |
| Sheet thickness, floor / side panel | 5 / 2,5 mm |
| Platform height | 1.270 mm |
| Track width | 1.900 mm |
| Suspension | Parabolic suspension |
| Tyres | 385/65 R 22,5 RE |
| Permissible speed | 40 km/h |
| Tipping system | three-way |
| Tipping angle, rear / side | 50 / 46° |
| Telescopic ram | Stroke 1.700 mm, oil requirement 13 l, operating pressure 200 bar |
| Required tractor power | 78 PS / 57,3 kW |
Note: All listed parameters apply to individual approval in Germany.
Product description
Three-way tipper, pallet width, with a 10.3 t payload
The sprung two-axle trailer carries 10.290 kg on a platform with an internal width of 2.420 mm. It tips to the rear and to either side, has a standard road speed of 40 km/h and a 5-mm floor.
Pallet width – what that means in practice
At an internal width of 2.420 mm, Euro pallets fit crosswise.
| Arrangement | Space required | Fits? |
|---|---|---|
| 2 pallets crosswise (1.200 mm each) | 2.400 mm | yes |
| 3 pallets lengthways (800 mm each) | 2.400 mm | yes |
Why this makes the trailer so versatile: It is both a tipper and a pallet transporter. Seed, fertiliser, planting stock, building materials and crates of drinks are delivered on pallets – otherwise, they would need a second trailer.
5 mm floor with 600 mm standard side panels
The floor is one step thicker than on the smaller models in the range, which have 4 mm floors. It absorbs the impact during loading – gravel from a loader bucket, beet stones, pallet feet.
The 600 mm standard side panel is also higher than the 500 mm panels on the PT606 and PT608.
10.290 kg payload
The trailer carries more than two and a half times its own weight.
The figures behind it: 10.3 tonnes of grain takes up around 13 m³ – with the extensions fitted, payload and volume are perfectly matched. With heavy materials such as beet and gravel, the payload limit is reached first, so the standard side panels are sufficient.
Hydraulically opening side panels as an option
This is the most interesting equipment option on this model: the left-hand panel, right-hand panel or both can be opened hydraulically.
How this saves time in everyday use: With a conventional three-way tipper, the driver gets out before tipping to the side, unlocks the side panel and climbs back in. Twenty loads a day means getting in and out forty times.
For businesses that tip to the side frequently – local authorities spreading grit, or contractors filling silage clamps – this quickly pays for itself.
Fold-down side chutes
As optional equipment, fold-down sheet-metal chutes running the full length are available – on the left, right or both sides.
What they are for: When tipping to the side, they direct the material precisely and prevent it from running along the frame or getting underneath the trailer. When folded up, they do not get in the way when driving on the road or loading from the side.
Three extension levels
| Configuration | Typical loads |
|---|---|
| 600 mm side panels (standard) | Gravel, sand, soil, pallets – weight is the limiting factor here |
| + 600 mm extensions = 13,2 m³ | Grain, potatoes, beet |
| + further extensions = 600 + 600 + 600 mm | Maize, silage, wood chips |
Important for costing: Unlike the tandem version PT510, the extensions here are not included as standard. They must be ordered separately to achieve the 13,2 m³ capacity.
Tension cables or tension bars
Tension cables are fitted as standard. The side panels and extensions are prepared for tension bars – switching between them does not cost extra.
The difference: Tension cables are flexible and lightweight, but they sag. Tension bars retain their shape and provide defined stops – the better choice for pallet transport and general cargo.
Up to three grain outlets
One grain outlet is fitted in the rear panel as standard. Two or three are available as options.
Why multiple outlets are useful: With a platform width of 2,42 m, grain flows unevenly from a single outlet – faster in the middle than at the edges. Multiple outlets distribute the flow and speed up unloading.
Three-way tipper – the everyday advantage
A rear tipper needs space behind it and a pile in the direction of travel. A three-way tipper unloads where the material needs to go – to the side into a clamp, into a ditch or against a wall.
50° to the rear and 46° to the side – the tipping direction is selected using two pins with a safety system.
Ready for towing a second trailer
Rear connections for electrics, hydraulics and pneumatics, as well as a sprung trailer coupling, are included as standard. This allows a second trailer to be attached.
Important: The standard trailer coupling is not permitted with EU type approval.
Approval without loss of payload
Even with EU type approval, the permissible gross weight remains 14.200 kg – the EU version also comes with reinforced 400 × 120 mm drum brakes.
Additional equipment
- EU or AT type approval, including documents
- Two-line compressed-air braking system with ALB or ALB Premium
- 600 mm extensions; additional extensions for the third level
- Tension cables instead of tension bars (no extra charge)
- Left-hand, right-hand or both side panels with hydraulic opening
- Window 340 × 710 mm with grille and PLEXI pane
- Side panel lifting springs
- Roll-over cover with folding frame and platform
- Two or three grain outlets in the rear panel
- Discharge chute, rear sheet-metal chute across the full width
- Fold-down side sheet-metal chutes, left, right or both sides
- Drop sheets, 2 sets (only with extensions)
- Grain unloading auger with 30 t/h capacity (on request)
- Side panel hoops for transporting bales (not for public roads)
- Trailer couplings from various manufacturers
- Toolbox
- Side underrun protection
- Plastic mudguards behind the front axle and in front of the rear axle
- Spare wheel winch with crank under the chassis, spare wheel
- Slow-moving vehicle warning triangle
Applications
Agriculture and harvesting, agricultural merchants and seed logistics, garden centres and nurseries, landscaping, local authorities and depots, building materials merchants, construction, businesses transporting pallets.
Operating notes
- Confirm the approval route before ordering – with EU type approval, the standard trailer coupling is omitted.
- Extensions are not included as standard – they must be ordered to achieve 13,2 m³.
- When transporting pallets, ensure the load is adequately secured – the side panels alone are not sufficient.
- Before tipping, check the locking mechanism on the relevant side and secure the tipping direction using the pins.
- When tipping to the side, ensure the ground is level and firm – with three extension levels, the centre of gravity is high.
- Do not raise the platform beneath overhead power lines.
- Fold in the side sheet-metal chutes before driving on the road.
- Side panel hoops for transporting bales are not suitable for public roads.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
Frequently asked questions
Do Euro pallets fit crosswise on the platform?
Yes. At an internal width of 2.420 mm, two Euro pallets fit side by side crosswise – two times 1.200 mm equals 2.400 mm. Alternatively, three pallets fit lengthways.
How much can the tipper carry?
10.290 kg with a permissible gross weight of 14.200 kg – this remains the same with EU type approval.
Are the extensions included in the price?
No. The basic version has a side panel height of 600 mm; the 600-mm extensions, listed as additional equipment, are required for the stated 13,2 m³ capacity.
Can I open the side panels hydraulically?
Yes, as additional equipment – choose the left-hand panel, right-hand panel or both. The driver then no longer needs to get out to unlock them.
What are the side sheet-metal chutes for?
When tipping to the side, they direct the material precisely and prevent it from running along the frame or getting underneath the trailer. They fold up and do not get in the way when stowed.
Why have multiple grain outlets?
With a platform width of 2,42 m, grain flows unevenly from a single outlet. Two or three outlets distribute the flow and speed up unloading.
What tractor do I need?
78 PS or 57,3 kW. Tipping requires 13 litres of oil at 200 bar.
How far does the platform tip?
50° to the rear and 46° to the side. The tipping direction is selected using two pins with a safety system.