PRONAR Dreiseitenkipper 2-Achs, 13,1 t zGG, 10 t Nutzlast, 11,8 m³
€14,670.00
Standard equipment
- Central locking on three sides
- 600 mm sideboards with tension cables
- Tipping direction selected using two pins with safety system
- Y-shaped drawbar with rigid towing eye Ø 40
- Dual-line compressed-air brakes, drum brakes 300 × 90 mm
- Handbrake
- 12 V lighting system, rear lights with protective grille
- Grain chute in the tailgate
- Access ladder and steps
- Rear connections for electrics, hydraulics and pneumatics
- Manual sprung trailer coupling
- Body support for maintenance work
- Mudguards on the rear axle
- Wheel chocks with holder
- Paint finish: red chassis RAL 3000, green sideboards RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Two-axle three-way tipper |
| Permissible gross weight | 13.160 kg |
| Unladen weight | 3.160 kg |
| Payload | 10.000 kg |
| Load volume | 11,8 m³ (with sideboard height 600 + 600 mm) |
| Internal body dimensions L × W | 4.440 × 2.190 – 2.240 mm |
| Overall dimensions L × W × H | 6.455 × 2.390 × 2.500 mm |
| Sideboard height | 600 mm |
| Sheet thickness, floor / sideboard | 5 / 2,5 mm |
| Platform height | 1.320 mm |
| Track width | 1.700 mm |
| Suspension | Parabolic suspension |
| Tyres | 15,0/70-18 |
| Permissible speed | 25 km/h (40 km/h at no extra cost) |
| Tipping system | three-way |
| Tipping angle, rear / side | 50 / 46° |
| Telescopic ram | Stroke 1.700 mm, oil requirement 13 l, operating pressure 200 bar |
| Required tractor power | 72,8 PS / 53,5 kW |
Note: All listed parameters apply to individual approval in Germany.
Product description
Two-axle three-way tipper with a 10-tonne payload
The sprung two-axle trailer carries 10.000 kg with an unladen weight of 3.160 kg and tips to the rear and to either side. The 600 mm sideboards come with tension cables as standard.
Ready for towing a second trailer
This is a feature not found on every tipper in this class: rear connections for electrics, hydraulics and pneumatics, as well as a sprung trailer coupling, are included as standard.
What this makes possible: attaching a second trailer. During harvest, clearance work and short-distance transport, you can double the load without making two trips. The sprung coupling absorbs the pulling forces between the vehicles.
Important: The standard trailer coupling is not permitted with EU type approval.
Three extension levels – from 11,8 m³ upwards
| Configuration | Typical loads |
|---|---|
| 600 mm sideboard (standard) | Gravel, sand, soil – weight is the limiting factor here |
| + 600 mm extensions = 11,8 m³ | Grain, potatoes, sugar beet |
| + additional middle extensions = 600 + 600 + 600 mm | Maize, silage, wood chips |
| 1.000 mm mesh extensions | Green waste, leaves, lightweight material |
The figures behind this: 10 tonnes of grain fill around 13 m³, while silage fills over 16 m³. Only with the third extension level is the payload fully utilised when carrying lightweight material.
The mesh extensions are available with an 8 mm or 30 mm mesh size. The finer version also retains leaves and chopped material, making it the right choice for local authorities and landscaping businesses.
40 km/h at no extra cost
The 40 km/h version costs nothing extra. Please note: the permissible gross weight falls from 13.160 to 12.000 kg.
| Version | Permissible gross weight | Payload |
|---|---|---|
| 25 km/h (standard) | 13.160 kg | 10.000 kg |
| 40 km/h (at no extra cost) | 12.000 kg | approx. 8.800 kg |
| EU type approval, 40 km/h | 12.000 kg | approx. 8.800 kg |
Worth noting: Unlike some related models, the permissible gross weight does not fall any further with EU type approval here – both 40 km/h options allow 12.000 kg.
5 mm floor
A robust specification for a tipper in this class. The floor absorbs the impact during loading – gravel from a wheel loader bucket, beet stones, building rubble. That is why this trailer is also suitable for building sites.
Tension cables included as standard
They are included as standard on the main sideboards. They hold the sideboards at a set angle while tipping, rather than letting them swing freely – protecting the hinges and sideboards.
The extensions do not come with tension cables – bear this in mind when ordering.
Viewing windows for harvest operations
Optional 340 × 710 mm windows are available in the front extension, with a grille and PLEXI pane; with three extension levels, a window is also available in the middle extension.
Why this matters during harvest: When unloading from a forage harvester or combine harvester, the driver otherwise cannot see how full the trailer is – especially with a body height of 1,8 m.
Three brake system options
Standard equipment includes dual-line compressed-air brakes with 300 × 90 mm drum brakes and a handbrake. Optional ALB or ALB Premium.
Why ALB is useful: The trailer weighs 3,2 tonnes empty and 13,2 when loaded – four times as much. Without load-dependent braking, the wheels lock when the trailer is empty. ALB is also part of the EU type approval package.
Three spare wheel options
The manufacturer offers a spare wheel holder on the trailer, on the drawbar, or a spare wheel winch under the chassis.
The winch is the most practical option: A 15,0/70-18 wheel is so heavy that it is difficult to remove from a high-mounted holder without help.
Additional equipment
- DE, AT or EU type approval, including documents
- 40 km/h version (at no extra cost)
- Dual-line compressed-air brakes with ALB or ALB Premium
- 600 mm extensions without tension cables
- Additional middle extensions, 600 mm
- 1.000 mm mesh extensions with 8 mm or 30 mm mesh size
- 340 × 710 mm window with grille and PLEXI pane
- Sideboard lifting springs
- Roller cover with folding frame and platform
- Discharge chute, full-width sheet-metal chute at the rear
- Drop sheets, 2 sets (only with extensions)
- Grain unloading auger, 30 t/h (on request)
- Sideboard hoops for transporting bales (not for public roads)
- Trailer couplings from various manufacturers
- Side underrun protection
- Plastic mudguards behind the front axle and in front of the rear axle
- Spare wheel holder on the trailer or drawbar, spare wheel winch under the chassis
- Warning triangle for slow-moving trailers
Applications
Agriculture and harvesting, agricultural contractors, biogas plants, landscaping, local authorities and public works departments, construction, forestry.
Operating notes
- Confirm the approval route and speed version before ordering – both affect the permissible gross weight.
- The standard trailer coupling is not included with EU type approval.
- Before tipping, check the lock on the relevant side and secure the tipping direction using the pins.
- When tipping to the side, ensure the ground is level and firm – with three extension levels, the centre of gravity is high.
- Do not raise the body under overhead power lines.
- The body support is intended exclusively for maintenance work.
- Sideboard hoops for transporting bales are not suitable for public roads.
- The spare wheel holder fits standard tyres only and cannot be fitted together with the platform.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
Frequently asked questions
How much can the tipper carry?
10.000 kg with a permissible gross weight of 13.160 kg in the 25 km/h version. At 40 km/h and with EU type approval, the permissible gross weight is 12.000 kg.
Is there an extra charge for the 40 km/h version?
No. However, the permissible gross weight falls to 12.000 kg.
Can I attach a second trailer?
Yes. Rear connections for electrics, hydraulics and pneumatics, as well as a sprung trailer coupling, are included as standard. However, the standard coupling is not permitted with EU type approval.
How do I get 11,8 m³?
The volume figure applies to the version with a 600 mm sideboard and a 600 mm extension. The standard sideboards are 600 mm high.
Can I make the body higher?
Yes, with additional middle extensions to give a height of 600 + 600 + 600 mm. Alternatively, 1.000 mm mesh extensions are available for lightweight material.
How far does the body tip?
50° to the rear and 46° to the side. The tipping direction is selected using two pins with a safety system.
What tractor do I need?
72,8 PS or 53,5 kW. Tipping requires 13 litres of oil at 200 bar.
Are tension cables included?
Yes, on the main sideboards, but not on the extensions. They hold the sideboards at a set angle while tipping and protect the hinges and sideboards.