PRONAR Dreiseitenkipper 1-Achs, 3,4 t, Auflaufbremse, ab 20,8 PS
€6,395.00
Standard equipment
- Central locking on three sides
- Tipping mechanism with cut-off device
- Overrun brake with automatic reverse function
- Overrun drawbar with fixed towing eye Ø 40
- Foldable jockey wheel
- 12 V lighting system
- Body support for maintenance work
- Rear underrun protection, homologated
- Wheel chocks with holder
- Paint finish: red chassis RAL 3000, green side panels RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Single-axle three-way tipper with overrun brake |
| Permissible gross weight | 3.400 kg |
| Unladen weight | 1.015 kg |
| Payload | 2.385 kg |
| Load volume | 2,1 m³ (4,1 m³ with extensions) |
| Internal body dimensions L × W | 2.910 × 1.410 mm |
| Overall dimensions L × W × H | 4.420 × 1.595 × 1.390 mm |
| Side panel height | 500 mm |
| Sheet thickness, floor / side panel | 3 / 2 mm |
| Platform height | 850 mm |
| Track width | 1.150 mm |
| Suspension | rigid |
| Brake | Overrun brake with automatic reverse function |
| Nose weight | 480 kg |
| Tyres | 10,0/75-15,3 |
| Permissible speed | 25 km/h |
| Tipping system | three-way |
| Tipping angle, rear / side | 50 / 46° |
| Telescopic cylinder | Stroke 1.300 mm, oil requirement 8 l, operating pressure 160 bar |
| Required tractor power | 20,8 PS / 15,3 kW |
Note: All listed parameters apply to individual approval in Germany.
Product description
The little one with full tipping capability – and no need for compressed air
This single-axle trailer carries 2.385 kg and tips backwards and to either side. The overrun brake has an automatic reverse function – the towing vehicle does not need a brake connection.
Overrun brake – the tipper fits behind almost anything
That is the key point with this version.
The overrun brake is purely mechanical – it is activated when the trailer runs up against the towing vehicle. This means the tipper can be towed by any vehicle with a tow hitch.
- Behind compact tractors and small tractors without a brake connection
- Behind pick-ups, off-road vehicles and vans
- Behind municipal vehicles and yard loaders with a towing hitch
The automatic reverse function releases the brake automatically when reversing. Without it, the driver would have to get out and operate a locking lever – every time they manoeuvre.
20,8 PS – the key figure
This is the lowest power requirement in the entire tipper range.
What this makes possible:
- Compact tractors and narrow-track tractors can tow the tipper without worrying about a lack of power reserve.
- Older small tractors from the 1970s and 80s can handle it too.
- Yard loaders and telescopic handlers with a towing hitch can also tow it – provided the nose weight is suitable.
For tipping it requires 8 litres of oil at just 160 bar – even a very basic hydraulic system can supply this.
1.595 mm wide – fits where others cannot
The second key advantage of this tipper.
- Narrow farm entrances and gates on older properties.
- Paths between greenhouses and in nurseries.
- Cemetery paths and parks – classic municipal terrain.
- Equestrian facilities with narrow access to the stables and muck heap.
The platform height of 850 mm is the lowest in the range – loading by hand, with a wheelbarrow or with a small loader requires no overhead lifting.
Three-way tipper despite its compact size
The tipper unloads backwards and to either side – with 50° to the rear and 46° to the side, the same angles as the larger models.
This is particularly useful for municipal and garden work: There is no room to manoeuvre on narrow paths. Material can be tipped to the side, onto the edge of a flower bed or into a ditch, without blocking the path.
Tipping mechanism with cut-off device
It limits the tipping movement. This is a safety feature on a single-axle tipper with the body raised – the centre of gravity moves far back and upwards as it tips.
2,1 m³ – almost double with extensions
| Configuration | Volume | Typical materials |
|---|---|---|
| 500 mm side panels (standard) | 2,1 m³ | Soil, sand, gravel, paving stones |
| + 500 mm extensions | 4,1 m³ | Green waste, leaves, bark mulch, wood chips |
The figures behind it: Almost 2,4 tonnes of soil fit into just over 1,6 m³ – with heavy materials, the payload limit is reached long before the volume limit. For green waste and leaves, the extensions almost double the practical capacity, because volume is the limiting factor.
Central locking on three sides
Standard even on the smallest model: each side is secured with one handle instead of several individual catches.
Why this is more than just convenient: Forgotten individual catches are one of the most common causes of side panels opening while travelling.
Colour option at no extra cost
In addition to the standard paint finish, a version with a black chassis (RAL 9005) and orange side panels (RAL 2008) is available at no extra cost – practical for local authorities and businesses that prefer orange warning colours.
Additional equipment
- 500 mm extensions for 4,1 m³
- Black/orange paint finish (no extra cost)
- Spare wheel
- Warning triangle for slow-moving trailers
Applications
Landscaping, garden centres and nurseries, local authorities, cemeteries and parks, equestrian and horse businesses, hobby farming and part-time farming, clubs, caretaking services, businesses without a vehicle with a brake connection.
Operating notes
- Check the towing vehicle's nose weight: up to 480 kg.
- Check the overrun device and breakaway cable regularly.
- Before tipping, check that the relevant side is unlocked.
- When tipping to the side, ensure the ground is level and firm – a single-axle tipper with the body raised is at risk of tipping over.
- Do not raise the body beneath overhead power lines.
- The body support is intended exclusively for maintenance work.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
Frequently asked questions
Do I need an air brake on the towing vehicle?
No. The overrun brake is purely mechanical – the tipper can be towed by any vehicle with a tow hitch, including pick-ups, vans and small tractors.
What is the automatic reverse function?
It automatically releases the overrun brake when reversing. Without it, the driver would have to get out and operate a locking lever every time they manoeuvre.
How much can the tipper carry?
2.385 kg with a permissible gross weight of 3.400 kg.
What tractor do I need?
20,8 PS or 15,3 kW – the lowest power requirement in the tipper range. The nose weight is 480 kg. Tipping requires 8 litres of oil at 160 bar.
Will the tipper fit through narrow entrances?
At 1.595 mm wide, it fits where larger tippers cannot – through farm entrances, between greenhouses and along cemetery paths.
What is the body capacity?
2,1 m³ with a side panel height of 500 mm. With the optional 500 mm extensions, capacity is 4,1 m³.
How far does the body tip?
50° to the rear and 46° to the side – the same angles as the larger models in the range.
Are other colours available?
Yes, a version with a black chassis and orange side panels is available at no extra cost.