PRONAR Dreiseitenkipper 1-Achs, 2,98 t zGG, ab 20,8 PS, 2,1 m³

Standard equipment

• Central locking on three sides
• Drawbar with overrun hitch and fixed towing eye Ø 40
• Folding jockey wheel
• Dual-line compressed-air brakes, drum brakes 250 × 60 mm
• Handbrake
• 12 V lighting system
• Body support for maintenance work
• Rear underrun protection, type-approved
• Wheel chocks with holder
• Paint finish: red chassis RAL 3000, green sides RAL 6010

Technical data

Note: All parameters listed apply to individual approval in Germany.

Product description

The little one with full tipping capability

This single-axle trailer carries 1.965 kg and tips to the rear and to either side – just like the larger models in the range. With a power requirement of 20,8 PS and a width of 1.595 mm, it is designed for small tractors and confined spaces.

20,8 PS – the key figure

This is the lowest power requirement in the entire tipper range.

What this makes possible:

• Compact tractors and narrow-track tractors can tow the tipper without running short of power.
• Older small tractors from the 1970s and 80s can handle it too.
• Farm loaders and telehandlers with a towing hitch can also tow it – provided the nose weight is suitable.

For tipping, just 8 litres of oil at 160 bar are required – even a very basic hydraulic system can supply this.

1.595 mm wide – fits where others cannot

The tipper’s second key advantage.

• Narrow farm entrances and gates on older properties.
• Paths between greenhouses and in nurseries.
• Cemetery paths and parks – classic municipal terrain.
• Equestrian facilities with narrow access to the stables and muck heap.

The platform height of 850 mm is the lowest in the range – loading by hand, with a wheelbarrow or with a small loader requires no overhead lifting.

Three-way tipper despite its compact size

The tipper unloads to the rear and to either side – with 50° to the rear and 46° to the side, the same angles as the larger models.

This is particularly useful for municipal and garden work: There is no room to manoeuvre on narrow paths. Material can be tipped sideways onto the edge of a bed or into a ditch without blocking the path.

2,1 m³ – almost double with extensions

The figures behind it: Almost 2 tonnes of soil fit into just over 1,3 m³ – with heavy loads, the payload limit is reached well before the volume limit. For green waste and leaves, the extensions almost double the practical capacity, because volume is the limiting factor.

Central locking on three sides

Standard even on the smallest model: each side is secured with a single handle rather than several separate fasteners.

Approval

The difference here is small – just 80 kg. The EU version also has the more powerful 300 × 60 mm drum brakes and a higher permissible nose weight.

Under-slung hitch as an option

As standard, the drawbar is designed for an overrun hitch with a fixed towing eye Ø 40. An under-slung hitch with K80 ball coupling is available as an option – suitable for tractors with a hitch coupling.

Alternative colour scheme at no extra cost

In addition to the standard paint finish, a version with a black chassis (RAL 9005) and orange sides (RAL 2008) is available at no extra cost – ideal for local authorities and businesses that prefer orange warning colours.

Additional equipment

• AT or EU type approval, including documents
• Under-slung hitch with K80 ball coupling
• Changeover brake for hydraulic braking systems
• 500 mm extensions for 4,1 m³
• Side rails for transporting bales (not for use on public roads)
• Black/orange paint finish (no extra cost)
• Spare wheel
• Warning triangle for slow-moving trailers

Applications

Landscaping, garden centres and nurseries, local authorities, cemeteries and parks, equestrian and horse businesses, hobby farming and part-time farming, clubs, caretaking services.

Operating notes

• Confirm the approval route before ordering.
• Check the towing vehicle’s nose weight: up to 480 kg, or 600 kg with EU type approval.
• Check that the relevant side is unlocked before tipping.
• When tipping to the side, ensure the ground is level and firm – a single-axle tipper with its body raised can be unstable.
• Do not raise the body beneath overhead power lines.
• The body support is intended exclusively for maintenance work.
• Side rails for transporting bales are not suitable for use on public roads.
• Retighten the wheel nuts after the first few hours of operation and regularly thereafter.

Frequently asked questions

How much can the tipper carry?

1.965 kg with a permissible gross weight of 2.980 kg. With EU type approval, the permissible gross weight is 2.900 kg.

What tractor do I need?

20,8 PS or 15,3 kW – the lowest power requirement in the tipper range. The nose weight is 480 kg. Tipping requires 8 litres of oil at 160 bar.

Will the tipper fit through narrow entrances?

At 1.595 mm wide, it fits where larger tippers cannot – through farm entrances, between greenhouses and along cemetery paths.

What is the body capacity?

2,1 m³ with 500 mm sides. With the optional 500 mm extensions, capacity is 4,1 m³.

When do I need the extensions?

For lightweight loads. Almost 2 tonnes of soil fit into just over 1,3 m³ – for green waste and leaves, however, volume is the limiting factor, and the extensions almost double the practical capacity.

How far does the body tip?

50° to the rear and 46° to the side – the same angles as the larger models in the range.

Is an under-slung hitch available?

Yes, as optional equipment with a K80 ball coupling. As standard, the drawbar is designed for an overrun hitch with a fixed towing eye Ø 40.

Are other colours available?

Yes, a version with a black chassis and orange sides is available at no extra cost.