PRONAR Ballenwagen 2-Achs, 7,3 t Nutzlast, 4-mm-Boden, 40 km/h
€11,390.00
Standard equipment
- Platform with raised side profile edges
- Reinforced steel floor, 4 mm
- Y-drawbar with fixed towing eye Ø 40
- Dual-line compressed-air brakes, 300 × 90 mm drum brakes
- Handbrake
- Rear electrical connection
- Lighting system with side marker lights
- Front and rear load racks, rounded and foldable
- Platform extension (not permitted for use on public roads)
- Lashing strap holes on the platform edges and load racks
- Rear underrun protection, type-approved
- Wheel chocks with holder
- Paint finish: green RAL 6010
Technical data
| Manufacturer | PRONAR |
|---|---|
| Product type | Two-axle bale transport trailer |
| Permissible gross weight | 10.000 kg |
| Unladen weight | 2.700 kg |
| Payload | 7.300 kg |
| Internal platform dimensions L × W | 6.495 – 7.395 mm × 2.517 mm |
| Overall dimensions L × W × H | 9.135 × 2.550 × 2.899 mm |
| Load rack height above platform | 1.700 mm |
| Floor plate thickness | 4 mm |
| Platform height | 1.130 mm |
| Track width | 1.730 mm |
| Suspension | Parabolic suspension |
| Tyres | 400/60-15,5 |
| Permissible speed | 40 km/h |
| Required tractor power | 67,6 PS / 49,7 kW |
Note: The platform length of 7.395 mm applies with the platform extension. All parameters listed apply to individual approval in Germany.
Product description
Reinforced two-axle bale transport trailer
The sprung tandem offers a load platform up to 7.4 m long and 2.52 m wide, with a payload of 7.300 kg. The reinforced 4-mm floor, raised side profile edges and lashing strap holes are included as standard.
Reinforced means more than just bales
Three features make this trailer more versatile than a basic model:
- 4 mm floor plate. The floor can handle concentrated loads – pallet feet, fork tines and machinery set down on it. A bale trailer is rarely loaded with bales alone.
- Raised side profile edges. They keep the bottom layer in position, rather than letting it slide over the edge when braking or cornering.
- Lashing strap holes on the platform and load racks. These also allow the upper layers to be secured with straps.
7.300 kg – what that means in bales
| Bale type | Weight per bale | Number up to payload limit |
|---|---|---|
| Straw square bales | approx. 300 kg | around 24 |
| Hay square bales | approx. 400 kg | around 18 |
| Silage round bales | 600 – 900 kg | 8 to 12 |
For straw, the platform area is the limiting factor; for silage, it is the payload.
67,6 PS – suitable for almost any farm tractor
For a payload of 7,3 tonnes and a 7,4 m load platform, this is a moderate figure. The trailer is therefore suitable for tractors in the 75-PS class.
Load securing – taken seriously here
Round bales roll, square bales shift, and in an emergency stop either can hit the tractor cab.
There are lashing points in two places:
- On the platform edges – for the lower layers.
- On the load racks – so the upper layers can also be secured with straps without having to run the strap over the full height.
Optional: two front lashing strap reels are available to make securing and releasing the straps considerably quicker.
Platform extension included as standard
The length increases from 6.495 to 7.395 mm – almost a metre more.
Important: The platform extension is not permitted for use on public roads. It is intended for use in the field and on farm premises.
Rounded, foldable load racks
- Front and rear – the load is secured in the direction of travel and to the rear.
- Rounded – bales are easier to slide on and are not torn by sharp edges during loading.
- Foldable – for bulky loads, side loading and space-saving storage.
Alternatives: fixed load racks, or a version without load racks and platform extension, which reduces the price by 680 €.
Parabolic suspension and 40 km/h
- Protects the load. Silage bales wrapped in film are sensitive to impacts – any damaged film means spoiled feed.
- Protects the trailer. Unsprung axles transmit every impact to the frame.
- Allows speeds of 40 km/h. This makes a difference on longer transport journeys.
For 40 km/h approval in Germany, plastic mudguards are required in front of and behind the rear axle; in Austria, they are also required behind the front axle. Both are optional equipment.
Approval without loss of payload
Even with EU type approval, the permissible gross weight remains 10.000 kg – unlike many other PRONAR models, the approval route does not result in any loss of payload here.
Overrun brake as an alternative
The manufacturer also offers the T022M with an overrun brake.
What this makes possible: The trailer can then be towed by any vehicle with a towbar – even without a brake connection. Pick-ups, Unimogs, older tractors and municipal vehicles are all suitable.
About the tyres
Diagonal tyres 400/60-15,5 are fitted as standard. The manufacturer notes: Diagonal tyres should only be used for typical agricultural applications. If you drive mainly on tarmac roads, you should choose radial tyres.
Additional equipment
- DE, AT or EU type approval, including documents
- Dual-line compressed-air brakes with ALB or ALB Premium
- Version without load racks and platform extension
- Fixed load racks instead of foldable ones
- V. Orlandi or PRONAR towing hitches
- Toolbox
- Side underrun protection in accordance with 89/297/EEC
- Lashing strap reels, 2 at the front
- Plastic mudguards (required for 40 km/h approval)
- Spare wheel holder with winch, spare wheel
- Slow-moving vehicle warning triangle
Applications
Agriculture and forage production, part-time farms, agricultural contractors, straw trading, equestrian businesses and riding centres, biogas plants, landscaping, local authorities.
Operating notes
- Clarify the approval route before ordering.
- Do not use the platform extension on public roads.
- Mudguards are required for 40 km/h approval.
- Always secure the load with straps – even on short journeys and even when the load is tightly packed between the load racks.
- With round bales, ensure they are secured against rolling; the load racks do not replace lashing straps.
- Observe the permitted height: with load racks, the trailer is 2.899 mm high.
- Retighten the wheel nuts after the first few hours of operation and regularly thereafter.
- Choose tyres to suit the application.
Frequently asked questions
How much can the trailer carry?
7.300 kg with a permissible gross weight of 10.000 kg – even with EU type approval, it remains at 10.000 kg.
How long is the load platform?
6.495 mm, or 7.395 mm with the platform extension supplied as standard. The extension is not approved for use on public roads.
How many bales will it hold?
It depends on the type of bale: around 24 straw square bales, about 18 hay square bales or 8 to 12 silage round bales.
What is the 4-mm floor for?
It can handle concentrated loads – pallet feet, fork tines and machinery set down on it. A bale trailer is rarely loaded with bales alone.
What tractor do I need?
67,6 PS or 49,7 kW.
What is required for 40 km/h approval?
In Germany, plastic mudguards in front of and behind the rear axle; in Austria, also behind the front axle. Both options are optional equipment.
Is a version without compressed-air brakes available?
Yes, the trailer is also available with an overrun brake. It can then be towed by any vehicle with a towbar.
Can I reduce the price?
The version without load racks and platform extension reduces the price by 680 €. This may be suitable for transporting loose or general cargo only.