Patura water pipe frost protection heating cable - length 18 m, 230V / 288 W
€46.00
Available, delivery time: 2-5 days
Description
Patura water pipe frost protection heating cable - length 18 m, 230V / 288 W
Frost protection heating cable
Prevents the water pipe from freezing in the event of frost.
- Typical heat output: max. 16 W per metre
- Thermostat (plug-in version): Switch-on temperature 3° C, switch-off temperature 12° C
- Lay remaining lengths at the end of the cables in windings around the cable (minimum winding distance 15 mm)
- Degree of protection: IP X7 (protection against temporary submersion)
Description of the
- 230 V connection, with Schuko plug
- With thermostat
- Max. 16 W/m (at 0° C)
- 2 m supply cable and plug
- RCD 30 mA required on site
- Degree of protection IP X7
- Switches on at 3° C and off at 12° C
Product note
This heating cable must not be shortened under any circumstances.
Practical tip
Protect water and heating pipes against browsing! You can use our two pipe protection models (Ref. 380108 and 380119) for this purpose.
If heating cables are used, the water pipes should be suitable for hot water.
When using plastic pipes, our aluminium adhesive tape (Ref. 351181) ensures optimum heat distribution on the water pipe. This should be applied to the plastic pipe before laying the heating cable.