Patura pipe fitting thermostat
€78.07
Available, delivery time: 2-5 days
Description
Patura pipe fitting thermostat
Basics for connecting heated drinking bowls and heating cables
The thermostat is connected between the socket and the heater. If the temperature falls below a certain level, the system is automatically activated. As soon as there is no longer a risk of frost, the system switches off again automatically.
With the frost protection thermostat (Ref. 381510), the switching criterion is the air temperature, while with the pipe contact thermostat (Ref. 381520), the water temperature at the water pipe is used as the switching criterion.
The use of thermostats pays for itself quickly, as the heating system only runs when it is actually needed. This saves electricity and at the same time always ensures that the heating is activated when there is a risk of frost. Ideally, the thermostats should be positioned at the coldest point.
Important: 230 V systems should be installed by a specialist.
Description of the
- For mounting on the water pipe
- Automatic switch-off of the self-regulating heating cable
- Max. 16 A / 230 V (max. switching capacity 3.6 kW)
- Temperature adjustable from 0 to 120° C
- Degree of protection IP54, splash-proof
- Dimensions: 12 x 6 x 6 cm (L x W x H)
Installation tip
Installation should be carried out by a specialist.
Practical tip
Protect water and heating pipes against browsing! Use our pipe protection models (Ref. 380108 and 380119) for this purpose.