NTC Vibrationsplatte 500 mm, 24 kN, 110 kg, vorwärtslaufend, Benzin
€1,485.00
Scope of delivery
- 1 × forward-travelling vibrating plate, working width 500 mm
- Briggs & Stratton Vanguard 160 petrol engine with integrated cyclone air filter, recoil start
- Vibration-isolated, folding guide handle
- Operating instructions in German, CE declaration of conformity
Not included: Plastic paving protection mat, sprinkler system with water tank for asphalt, wheel kit, throttle lever on the guide handle, hour meter.
Technical data
| Design | forward-travelling (single-direction) vibrating plate |
|---|---|
| Centrifugal force | 24 kN |
| Exciter frequency | 100 Hz (6,000 min-1) |
| Working width | 500 mm |
| Base plate | 500 × 565 mm, rounded edges |
| Compaction depth | up to 25 cm, depending on material |
| Travel speed | max. 25 m/min |
| Engine | Briggs & Stratton Vanguard 160, single-cylinder four-stroke, OHV, air-cooled |
| Displacement | 169 cm³ |
| Engine power | 3.7 kW / 5.0 hp at 3,600 min-1 (gross power) |
| Cylinder bore | Cast-iron sleeve |
| Air filter | integrated cyclone pre-cleaner, replacement interval 600 operating hours |
| Ignition | electronic (CDI) |
| Fuel tank | 3.1 l, unleaded petrol |
| Engine oil capacity | 0.6 l |
| Starting | recoil start |
| Operating weight | approx. 110 kg |
Product description
This forward-travelling vibrating plate compacts with 24 kN of centrifugal force at 100 Hz across a working width of 500 mm and achieves a compaction depth of up to 25 cm. It is powered by the Briggs & Stratton Vanguard 160 – a commercial-grade engine with a cast-iron sleeve and integrated cyclone air filter. This engine is precisely why you should choose this version – not because of its power.
Why the cyclone air filter is so valuable on a vibrating plate
A vibrating plate works in the dustiest part of the site: on dry gravel, crushed sand, chippings and aggregate, with the engine sitting 40 cm above it in the dust cloud. The air filter is the hardest-worked component on the entire machine – and a clogged filter does more than reduce power: it makes the engine run rich and shortens its life.
The Vanguard 160 separates coarse dust before it reaches the paper element, using a cyclone. Together with the filter medium, this gives a replacement interval of 600 operating hours according to the manufacturer – twice the industry norm. In practice, this means that at 600 operating hours a year, you replace the air filter once instead of twice, have one fewer cause of downtime, and the engine runs with the correct fuel mixture throughout. On a hire machine that nobody maintains, it is the difference between an engine that lasts three seasons and one that does not.
There is also the TransportGuard: a lever that switches off the ignition and shuts off the fuel supply at the same time. A vibrating plate is transported constantly, often lying down in a van. With the fuel supply shut off, petrol cannot seep into the engine oil – the most common and costly transport-related damage to site engines.
What the Vanguard explicitly does not provide: greater compaction. The 3.7 kW figure is a gross rating, and the exciter – not the engine – generates the 24 kN of centrifugal force. If you buy this machine for its power, you are buying it for the wrong reason. If you buy it for the service intervals and transport safety, you are making the right choice.
24 kN is 22 times the machine's own weight – why centrifugal force is the key figure
Compaction is achieved not by weight, but by dynamic surface pressure. Here is the calculation for this plate:
| Plate area | 0.500 × 0.565 m = 0.2825 m² |
|---|---|
| Static load from 110 kg | approx. 1.08 kN → 3.8 kN/m² |
| Dynamic load from 24 kN centrifugal force | 85 kN/m² (approx. 0.85 bar) |
The centrifugal force therefore delivers 22 times the machine's own weight. That is why plates are compared by centrifugal force rather than weight – and why a 110 kg plate with 24 kN compacts better than a heavier 15 kN plate, while still being easier to handle.
At 100 Hz, the plate strikes 6,000 times per minute. At a realistic working speed of 20 m/min, that is 300 impacts per metre travelled.
100 Hz: what it is good for – and what it is not
100 Hz is a high exciter frequency; many plates in this class operate at 70 to 90 Hz. A high frequency means a small amplitude and many impacts – with clear consequences:
- Very good: paving beds and paved surfaces, asphalt, bedding layers, fine-grained and well-graded materials, finishing work and surfaces that need to be smooth. The rounded plate edges leave no marks on asphalt.
- With limitations: thick layers of coarse aggregate. A machine with a lower frequency and greater amplitude will penetrate deeper in these conditions. It is better to work in thinner layers rather than make more passes over a thick layer.
- Wrong machine: cohesive soils such as loam and clay. These are not compacted by a plate, but by a vibratory rammer with its kneading action. This applies to all plates, not just this one – we mention it so you do not buy the wrong machine.
What you can realistically achieve in a day
The theoretical area coverage based on working width and maximum speed is 0.5 m × 25 m/min × 60 = 750 m²/h. You will find this figure in brochures; nobody achieves it on site. Here is the honest calculation:
| Theoretical, one pass at 25 m/min | 750 m²/h |
|---|---|
| With 10% overlap, working at 15 to 20 m/min | 400 to 540 m²/h per pass |
| Finished compacted area with three passes | 135 to 180 m²/h |
Use the last figure for your estimates. This is our calculation, not a manufacturer's figure – but it is the one you can use to prepare a quote.
Forward-travelling or reversible? Decide before you buy
| Criterion | Forward-travelling (this plate) | Reversible |
|---|---|---|
| Direction of travel | forward only | forward and reverse, can vibrate on the spot |
| Working in trenches | limited – must be turned around or lifted out | its natural domain |
| Working alongside walls and kerbs | awkward | straightforward |
| Compaction depth | up to 25 cm | considerably greater at a comparable weight |
| Weight and handling | lighter, more manoeuvrable, easier to transport | heavier, more expensive |
| Price | considerably lower | higher |
| Best suited to | paving, asphalt, open areas, yards and driveways, bedding layers | utility trenches, shoring, foundation bases, thick layers |
In short: if you work on open areas, choose a forward-travelling plate. If you backfill trenches, you need a reversible one. Get in touch if you do both – we can work out which of the two should be your main machine.
The accessories you really need – and why
- Plastic paving protection mat. Essential whenever you compact finished paving. The steel plate can chip the edges and surfaces of concrete blocks; the mat prevents this and distributes the energy more evenly. Without it, a finished surface becomes a repair job.
- Sprinkler system with water tank. Essential for asphalt. Without water, asphalt sticks to the plate and gets torn up. The tank is not included as standard with the Practic version.
- Wheel kit. Nobody can carry 110 kg alone. With the wheel kit, the plate can be rolled around the site instead of being lifted by two people.
- Throttle lever on the guide handle. As standard, the throttle lever is on the engine. If you frequently change the speed when laying paving, retrofitting one is worthwhile straight away.
- Hour meter. It may sound like a luxury, but it is essential if you are to keep to the 600-hour air-filter interval and oil-change schedule. Indispensable for hire machines, too.
The frame has lifting points on all sides, allowing the machine to be lifted by crane or loader and securely lashed down in a van.
Health and safety: the two figures we can provide
For commercial use, you need two figures that are rarely listed on product pages: the hand-arm vibration value in accordance with EN ISO 5349 and the sound power level. Under the Noise and Vibration at Work Regulations, the vibration value determines how long a person may operate the machine each day – the action value is A(8) = 2.5 m/s², and the exposure limit value is 5 m/s². Both figures are required for your risk assessment. Ask us for them and we will obtain them from the manufacturer and send them to you along with the declaration of conformity. The vibration-isolated guide handle significantly reduces the value, but it is not a figure in itself.
Frequently asked questions
What does the Vanguard engine offer over the standard version?
Not greater compaction, but longer service intervals and improved transport safety. The integrated cyclone air filter separates coarse dust before it reaches the paper element, which is why the manufacturer specifies a replacement interval of 600 operating hours. When the machine is switched off, the TransportGuard shuts off both the ignition and fuel supply, preventing petrol from getting into the engine oil during transport. The cylinder bore has a cast-iron sleeve.
How much area can I cover in an hour?
The theoretical figure for a 500 mm working width and 25 m/min is around 750 m²/h in a single pass. Realistically, allowing for overlap and a normal working speed, you can cover 400 to 540 m²/h per pass – which means around 135 to 180 m² of fully compacted area per hour with the usual three passes. Use this last figure when preparing quotes.
How thick can the layers I compact be?
The manufacturer specifies a compaction depth of up to 25 cm, depending on the material. This is achievable with well-graded granular material; with coarse aggregate, it is better to work in thinner layers. A vibrating plate is generally the wrong machine for cohesive soils such as loam and clay – use a vibratory rammer to compact these.
Can I use it to compact paving?
Yes, but only with the plastic paving protection mat. The steel plate would damage the edges and surfaces of concrete blocks. The high exciter frequency of 100 Hz is particularly well suited to paving because it works with a small amplitude and many impacts. The mat is an accessory and is not included in the scope of delivery.
Is the plate suitable for asphalt?
Yes. The plate edges are rounded to prevent marks, and 100 Hz is the right frequency for asphalt. However, you will need the sprinkler system with water tank, otherwise the asphalt will stick to the plate. This is an accessory with this version.
Why choose a forward-travelling plate rather than a reversible one?
Because it is the more economical machine for working on open areas: lighter, more manoeuvrable, easier to transport and considerably cheaper. For utility trenches, working alongside walls and thick backfill layers, however, you need a reversible plate because you cannot turn around in those spaces and need greater depth effect. Get in touch if you do both.
How do I move 110 kg around the site?
Not by hand. Either use the wheel kit, available as an accessory, which makes the plate mobile, or use a crane or loader – the frame has lifting points on all sides. When transporting the machine in a vehicle, secure it using the same points.
How often does the air filter need replacing?
The engine manufacturer specifies 600 operating hours for the cyclone air filter. We recommend the hour meter as an accessory so that you can keep to this interval – without one, it is difficult to track in practice. Even so, check the filter by hand regularly in extremely dusty conditions.
Are vibration and noise figures available for the risk assessment?
Yes, we can obtain them from the manufacturer for you – the hand-arm vibration value in accordance with EN ISO 5349 and the sound power level. You need both for your risk assessment under the Noise and Vibration at Work Regulations, because the vibration value determines the permitted daily operating time. Ask us for them before you buy.
| Drive type: | Benzinmotor |
|---|---|
| Engine manufacturer: | Briggs & Stratton |
| Gerätetyp : | Vibrationsplatte |
| Startsystem : | Seilzugstart |