Skip to main content Skip to search Skip to main navigation
Menu

Nero Schlegelmulcher 120 cm, Kat. I, hydraulischer Seitenverschub

Description

Scope of delivery

  • 1 × flail mower, working width 120 cm, with hydraulic side shift
  • 18 hardened hammer flails, fitted
  • PTO shaft
  • Rear roller
  • Adjustable skids for setting the cutting height
  • Front protective flaps, galvanised and suspended to swing
  • Operating instructions in German, CE Declaration of Conformity

What your tractor needs: Category I three-point linkage (if your tractor has Category II, you will need reducing bushes), a PTO shaft running at 540 rpm and a double-acting spool valve for the side shift. If your tractor does not have a double-acting spool valve, you will not be able to use the side shift – contact us beforehand and we will recommend the right version.

Not included: reducing bushes for Category II, Y-blade set, replacement flails, gearbox oil for changing.

Technical data

TypeRear-mounted flail mower
Working width120 cm
Side shifthydraulic, 350 mm, double-acting cylinder
Three-point linkageCategory I
PTO speed540 rpm
Tractor powerfrom 25 hp (18.4 kW)
Flails18 hardened hammer flails, approx. 0.4 kg each
Total flail weightapprox. 7.2 kg
Conversioncan be converted to Y-blades
Rotor tubeØ 7.8 cm
Drive3 V-belts
Gearbox oilSAE 85W-90, 0.6 l
Rear rollerØ 10.2 cm
Housing wall thickness3 mm
Dimensions132 × 65 × 76 cm
Weightapprox. 190 kg

Product description

This flail mower mulches across a 120 cm working width and can be shifted 350 mm beyond the tractor wheel track using the hydraulic side shift. Weighing 190 kg, with Category I three-point linkage and requiring from 25 hp, it is designed for compact and narrow-track tractors – and is particularly well suited to one specific task.

What this machine is – and is not – designed for

The key factor is the flail weight of around 0.4 kg. This determines how much impact energy reaches the cutting circle and clearly defines the mower’s class:

MaterialWith this machine
Grass, meadows, tall growththe intended task
Fallow land, weeds, nettles, thistleswell suited
Stubble, cover crops, green manurewell suited
Leaves, fruit-tree prunings up to finger thicknesspossible, with an adjusted forward speed
Scrub, brambles, branches over 2 cmnot suitable – this requires flails weighing 800 g or more
Logging residue, woody growth, coppice shootsnot suitable – this requires a forestry mulcher

We make this clear because it is the most common wrong purchase in this product category. A machine with 400 g flails used on scrub will lose flails, wear through belts and damage its bearings – all in the first season. Conversely, for grass maintenance, meadows and fallow land, it is lightweight, economical to maintain and honestly rated for a 25 hp power requirement. Tell us what you want to mulch before ordering – if it is woody growth, we would rather sell you the right machine than this one.

What the side shift is really useful for

The 350 mm hydraulic side shift is not intended for mulching banks or ditches – you need a mower with a side arm for that. Its benefits lie elsewhere, where they are considerable:

  • Along fences, walls and crash barriers: Shift the implement outwards and drive the tractor at a safe distance, rather than balancing a wheel on the edge.
  • In tree rows, orchards and vineyards: The mower works beneath the canopy while the tractor stays in the tramline.
  • Along roadsides and verges: Keep the tractor on firm ground and mulch the verge without the rear wheel sinking in.
  • On the second pass: Shift the implement so the wheel tracks are not in the same place twice.

The side shift is operated from the tractor and requires a double-acting spool valve. This is the one thing you should check on your tractor before ordering.

Hammer flails or Y-blades?

The rotor can be converted to Y-blades. Both have their uses:

CriterionHammer flails (standard)Y-blades
Finish in grassgood, coarser chopfiner, cleaner
Power requirementhigherlower
Thicker growth and leavesclearly betterlimited suitability
Foreign objects, stones, wiremore robustmore susceptible to damage
Wear costshigher per blade, longer service lifelower per blade, shorter service life

Rule of thumb: if you mainly want to finely mulch lawns and meadows, Y-blades are the better choice. If you work mixed areas with leaves, stubble and occasional foreign objects, stick with the hammer flails.

How much you can realistically mulch in a day

Mulching is done at 4 to 6 km/h – any faster and the chopped material becomes coarse and the rotor struggles. With a 120 cm working width, this gives:

Theoretical at 4 km/h0.48 ha/h
Theoretical at 6 km/h0.72 ha/h
Practical, allowing for overlap and turning0.4 to 0.6 ha/h

These figures are our calculations based on working width and forward speed, not manufacturer specifications. For planning, use the last figure: one hectare in just under two hours, or longer in dense, tall growth.

Power requirement: 25 hp is a realistic figure

For grass maintenance, allow around 10 to 12 kW of power per metre of working width for a flail mower. At 1.20 m, that is 12 to 14.5 kW, or around 16 to 20 hp. The manufacturer’s stated requirement of 25 hp therefore provides a genuine reserve – which you will need in tall, wet grass. More power will not harm the machine; the practical limit is set not by the engine but by the Category I three-point linkage.

A note on axle load distribution: 190 kg at the rear of a 25 hp compact tractor noticeably changes the weight distribution. Check your front axle load and use front ballast or a front weight when working on slopes.

Maintenance: the three things that determine service life

  • Always replace flails as a set, ensuring they are weight-matched. A new 400 g flail opposite a worn one causes imbalance, which is transferred directly to the rotor bearings. Replacing just one flail is the most common cause of bearing damage on mowers – always replace the opposing flails together.
  • Check V-belt tension after the first few hours of operation. New belts bed in; a slipping belt can burn out in minutes. Always replace all three belts as a set, never individually.
  • Check the gearbox oil. 0.6 l SAE 85W-90. Check before the season and, on a new machine, check for leaks after the first few hours.

Safety: a mower can throw stones

The front protective flaps, galvanised and suspended to swing, help contain stones and foreign objects – but only while they are complete and move freely. Check them before every use. Keep people and vehicles clear of the area, do not operate the machine with the rotor running while it is raised, and inspect unfamiliar areas beforehand: wire, posts, stones and metal debris are common causes of mower damage. The machine carries the CE mark; the Declaration of Conformity and German-language operating instructions are supplied.

Frequently asked questions

Can I use it to mulch brambles and scrub?

No, this machine is not designed for that. The hammer flails weigh around 0.4 kg and are intended for grass, fallow land, weeds and stubble. For growth over about 2 cm thick, brambles or woody growth, you need a mower with flails weighing 800 g or more. Tell us what you want to mulch and we will recommend the right machine.

What tractor do I need?

At least 25 hp or 18.4 kW, Category I three-point linkage, a PTO running at 540 rpm and a double-acting spool valve for the side shift. If your tractor has Category II linkage, you will need reducing bushes. Also bear in mind the 190 kg rear weight: front ballast is advisable on slopes and when driving on the road.

What do I need to use the side shift?

A double-acting spool valve on the tractor, as the side-shift cylinder is double-acting. Many tractors in the 25 hp class and above have only a single-acting spool valve, or none at all. Check this before ordering – without a double-acting connection, the side shift cannot be operated, making the version without side shift the more economical choice.

Can I use it to mulch banks and ditches?

Not really. The 350 mm side shift is intended for working along fences, walls and roadsides, and in tree rows, without moving the tractor off its track. For proper bank and ditch maintenance, you need a mower with a side arm that can angle the implement.

How much area can I cover in an hour?

At a 120 cm working width and the usual 4 to 6 km/h, the theoretical rate is 0.48 to 0.72 ha/h; in practice, allowing for overlap and turning, 0.4 to 0.6 ha/h. So one hectare takes just under two hours, or longer in tall, wet growth.

Is it worth converting to Y-blades?

If you mainly want to finely mulch lawns and meadows, yes: Y-blades cut more finely and require less power. For mixed areas with leaves, stubble or occasional foreign objects, hammer flails are clearly more robust. Both fit the same rotor.

How do I set the cutting height?

Use the adjustable side skids; the rear roller helps guide the machine. As the roller is relatively narrow, with a diameter of 10.2 cm, it can sink into soft ground – so set the height carefully using the skids and do not work deeper than necessary. Cutting too low damages the turf, flails and machine performance.

How do I replace the flails correctly?

Always replace them as a set and ensure they are weight-matched. A single new flail opposite worn ones causes imbalance on the fast-spinning rotor, which destroys the rotor bearings. Replace at least the opposing flails together; ideally, replace the complete set of 18. The three V-belts should likewise be replaced as a set.