Nero Holzspalter stehend 22 t Zapfwelle, Spaltlänge 110 cm
€1,795.00
Scope of delivery
- 1 × vertical log splitter with 22 t splitting force
- Category I and II three-point linkage frame
- Own hydraulic system with PTO-driven pump and 24-litre oil tank
- Fitted log lifter, which serves as a safety guard when folded up
- Adjustable stroke limiter
- Splitting blade, 22 cm long
- Operating instructions in German
Not included: PTO shaft. The splitter is driven via the tractor PTO at 540 min-1; the suitable PTO shaft must be ordered separately. Hydraulic oil for the initial fill and the optional attachments, cable winch and splitting table, are also not included.
Technical data
| Manufacturer | Nero |
|---|---|
| Design | vertical log splitter (wedge splitter) |
| Max. splitting force | 22 t |
| Drive | Tractor PTO, 540 min-1 |
| Mounting | Category I and II three-point linkage |
| Splitting length | 56 – 110 cm |
| Splitting diameter | 8 – 35 cm |
| Splitting blade length | 22 cm |
| Distance from splitting blade to ground | 20 cm |
| Stroke limiter | adjustable |
| Operating modes | 2 – automatic or manual blade return |
| Cylinder diameter | 115 mm |
| Piston rod diameter | 60 mm |
| Cylinder speed | approx. 8 s forward, approx. 9 s return |
| Hydraulic oil capacity | 24 l |
| Recommended hydraulic oil | HLP 46 |
| Log lifter | fitted; serves as a safety guard when folded up |
| Dimensions (W × D × H) | 105 × 170 × 250 cm |
| Weight | approx. 320 kg |
| Safety standard | EN 609-1:2017 |
Product description
A vertical wedge splitter with a splitting force of 22 tonnes, driven via the tractor PTO. It comes with its own hydraulic system: a PTO-driven pump and a dedicated 24-litre oil tank. This means the tractor does not need a high-performance hydraulic system – it only needs a PTO running at 540 rpm and a Category I or II three-point linkage. This makes it suitable for smaller and older tractors too.
What 22 tonnes actually means
Log splitters are advertised in tonnes, but the figure is not always reliable. Here, it can be checked: a cylinder with a diameter of 115 mm has a piston area of around 104 square centimetres. To generate a pressure force of 22 tonnes, the system needs around 208 bar – a perfectly normal operating pressure for a hydraulic system of this size.
Why this matters: If a high tonnage is advertised for a cylinder that is too small, the hydraulic system would have to reach pressures it cannot sustain during continuous operation. The advertised force would then exist on paper, not in the wood. With this splitter, the cylinder dimensions and force rating are a good match.
And what you need the force for: Straight, well-grown spruce splits easily even with an 8-tonne machine. The reserve matters for what is left once the easy wood is gone: knotty beech, twisted oak, logs with forked branches, and frozen wood in winter. That is exactly where a weaker machine gives up, and exactly where the work begins for which you buy a splitter.
Splitting length of 56 to 110 cm – please check before buying
This is what determines whether the machine suits the way you work, and it is often overlooked.
At the upper end: 110 cm means a one-metre log can be split in a single stroke. This is the traditional way of working when producing firewood on a larger scale – split metre-long logs, leave them to dry, and cut them to length only when stacking or selling. If you work this way, you will make full use of the splitter.
At the lower end: 56 cm is the shortest length the splitter can handle. You cannot use this machine to split 25 cm or 33 cm stove logs directly. The usual method is to split metre-long logs and then cut them to length. If you prefer to cut them to length first and then split them, you will need a raised support or a different machine.
This is not a design flaw, but a design choice: a splitter with a 110 cm stroke is built for metre-long logs. It simply needs to suit what you intend to do.
Splitting diameter of 8 to 35 cm
The second geometric limit. 35 cm is the maximum diameter – a thicker log must first be sawn into sections or split from the outside. The 22 tonnes of force will not help here; it is the geometry, not the hydraulics, that sets the limit.
The lower limit of 8 cm may seem odd, but there is a practical reason: thinner pieces do not sit securely in the splitting area and can tip over during splitting. Wood under 8 cm in diameter is generally burned without splitting anyway.
The log lifter – and why it also serves as a safety guard
A one-metre beech log with a diameter of 35 cm weighs well over 80 kilograms. Lifting it into the splitter by hand is the most physically demanding and most dangerous movement in the entire process. The fitted log lifter picks up the wood from the ground and raises it into the splitting area.
Its dual function is not marketing, but good design: When folded up, the log lifter forms the safety guard in front of the splitting area. The component is therefore either in use or providing protection – there is no position where it gets in the way and is consequently removed. That is exactly what happens in practice with safety devices that serve no other purpose.
Stroke limiter and two operating modes
The stroke limiter is adjustable: when splitting short pieces, you can limit the blade's travel and shorten each cycle. With a forward stroke of around 8 seconds and a return stroke of around 9 seconds, this makes a real difference – over a working day with several hundred splitting cycles, every second saved adds up.
There are also two operating modes: the blade returns either automatically once it reaches the end point or under manual control. Automatic return is faster when working with uniform wood; manual return is useful when a piece needs repositioning several times because it will not split in one stroke.
Safety and compliance with standards
The splitter is designed in accordance with EN 609-1:2017, the harmonised standard for wedge splitters used in agriculture and forestry. The standard covers, among other things, the design of the splitting area, the controls and the safety devices.
What this means in practice: A log splitter is not a machine to operate casually. The splitting area is the most dangerous part of the machine, and the most common injury occurs when reaching in again while the blade is moving. The operating instructions are not just a leaflet supplied with this machine; they are part of its safety equipment. Wear sturdy footwear, avoid gloves with loose cuffs, and do not allow a second person into the danger zone.
Hydraulics and maintenance
The system holds 24 litres of hydraulic oil; HLP 46 is recommended. This is a standard hydraulic oil, available everywhere – not a specialist product and no reason for an expensive special order.
What to bear in mind: The 24 litres are not included. The system must be filled and the oil level checked before first use. Oil and filters are the only items that need servicing on a log splitter; for seasonal use, changing them according to operating hours makes more sense than following calendar years. The operating instructions specify the intervals.
Frequently asked questions
What tractor power do I need?
The manufacturer does not specify a power requirement. What matters is a PTO running at 540 min-1 and a Category I or II three-point linkage. As the splitter has its own hydraulic system, the tractor does not need a high-performance working hydraulics system. If your tractor is at the lower end of the power range, please ask us about the specific power requirement before buying.
Is a PTO shaft included?
No. The PTO shaft must be ordered separately and must be suitable for your tractor's PTO and the distance between the two.
Can I use it to split 33 cm stove logs?
Not directly. The minimum splitting length is 56 cm. The usual way to use this machine is to split metre-long logs and then cut them to length. If you cut them to length first and then split them, you will need a machine with a shorter minimum length.
How thick can the wood be?
The splitting diameter ranges from 8 to 35 cm. Thicker logs must first be sawn into sections. Here, the geometry of the splitting area, not the splitting force, sets the limit.
Do I need electricity where I split the wood?
No. This model is driven exclusively via the PTO and is therefore independent of the mains – the right drive for woodland, fields and locations without a three-phase power connection. If you mainly split wood in the yard with access to a 400 V connection, consider the version with an additional electric motor: it works without the tractor running.
Which hydraulic oil is required, and is it included?
HLP 46 is recommended; the system holds 24 litres. The oil is not included and must be added before first use.
How quickly does the splitter work?
The cylinder takes around 8 seconds for the forward stroke and around 9 seconds for the return stroke. The adjustable stroke limiter reduces the travel for shorter pieces, shortening each cycle. In practice, handling the wood has a greater effect on output than the cylinder speed.
What is the log lifter for?
It lifts heavy logs from the ground into the splitting area, replacing the most physically demanding movement in the process. When folded up, it also serves as a safety guard in front of the splitting area.