Skip to main content Skip to search Skip to main navigation
Menu

Nero Holzspalter Elektro 8 t, 230 V, Spaltlänge bis 55 cm

Description

Scope of delivery

  • 1 × electric log splitter with 8 t splitting force
  • 3,000 W electric motor for 230 V with connection cable
  • Hydraulic system with 4.5-litre oil tank
  • Splitting blade, 18 cm long
  • Adjustable stroke limiter
  • Operating instructions in German

Not included: splitting cross (available as an accessory), log lifter – not provided for this model – and hydraulic oil for the initial fill.

Technical data

ManufacturerNero
DesignWedge splitter
Max. splitting force8 t
Drive3,000 W electric motor, 230 V
Splitting length10 – 55 cm
Splitting diameter8 – 30 cm
Splitting blade length18 cm
Distance from splitting blade to ground55 cm
Stroke limiteradjustable
Cylinder diameter70 mm
Piston rod diameter25 mm
Forward speed3.1 cm/s
Return speed17 cm/s
Hydraulic oil capacity4.5 l
Recommended hydraulic oilHLP 46
Log lifternot provided
Dimensions (W × D × H)84.5 × 93.5 × 150 cm
Weightapprox. 110 kg

Product description

The smallest splitter in the range, and the only one that needs just a standard socket. No tractor, no PTO, no three-phase power – a 230 V connection is all it takes. At 110 kilograms, it can be moved by two people and stored in the garage over winter. It is designed for your own firewood supply: logs for the fireplace, stove wood and kindling – in the quantities a household burns, not the volumes sold as firewood.

8 tonnes – and why the figure stands up

Splitting force figures in this price bracket are notoriously exaggerated. With this machine, the figure can be checked, and it holds up.

A cylinder with a 70 mm diameter has a piston area of around 38.5 square centimetres. To generate 8 tonnes of splitting force, the hydraulics need to produce about 204 bar. At the stated forward speed of 3.1 cm per second, this corresponds to hydraulic power of around 2.4 kW – and allowing for the usual pump and motor efficiency, the required drive power is about 3 kW. The stated figure is 3,000 W.

What this means: The splitting force, cylinder size, speed and motor power all add up. When a high tonnage is advertised alongside an undersized cylinder or underpowered motor, the force exists on paper, not in the wood. Here, the figures have been worked through.

What 8 tonnes can – and cannot – split

This is the question to answer before buying, and the honest answer has two sides.

8 tonnes is enough for: straight-grained softwood, spruce and pine, knot-free pieces, soft broadleaf wood such as birch, alder and poplar, and dry beech or oak of moderate diameter. This covers most of what you will find in a typical household woodpile.

8 tonnes is not reliably enough for: heavily knotted beech, twisted oak, pieces with forked branches, forked trunks and frozen roundwood in winter. An 8-tonne machine will stall on these where a 16- or 22-tonne splitter will get through. If you mainly process this kind of wood, buy the larger machine and save yourself the frustration.

The rule of thumb: wood quality matters more than quantity. This splitter can handle ten cubic metres of solid straight-grained spruce. Two cubic metres of knotty beech can push it to its limit.

Logs from 10 to 55 cm long – the difference from the larger machines

This is the main practical advantage over the larger splitters in the range: this machine handles short logs. 25 cm and 33 cm stove logs, the two usual lengths for firewood, can be split directly. The larger PTO splitters start at a splitting length of 56 cm, so metre-long logs have to be split first and cut to length afterwards.

The order of work is therefore reversed: With this splitter, logs are cut to length first and then split. This is the approach that suits a household where the wood is stored ready-cut to stove length.

The maximum length is 55 cm. Metre-long pieces cannot be processed – they must be cut in half first.

Splitting diameter from 8 to 30 cm

30 cm is the maximum diameter. Larger logs must be sawn into smaller pieces first; here, it is the geometry of the splitting area, not the hydraulics, that sets the limit. The minimum diameter of 8 cm has a practical reason: thinner pieces do not sit securely in the splitting area and can tip over during splitting.

The stroke limiter – the most effective way to increase working speed

The forward speed is slow at 3.1 cm per second. This is not a fault, but the trade-off for the force: a two-stage pump exchanges speed for pressure. You can see this from the two stated speeds – the return stroke, which requires no force, runs at 17 cm per second, more than five times as fast.

How the stroke limiter helps: Over the full 55 cm stroke, a cycle takes around 18 seconds going forward and 3 seconds on the return. If you are splitting 33 cm logs and limit the stroke accordingly, this drops to about 11 seconds – almost half the time. Over several hundred splitting cycles in an afternoon, that is the difference between two and four hours. Setting the stroke limiter is the first thing worth doing with this machine.

What the 230 V connection requires

Because the power rating is accurate, the current draw is real too: 3,000 W at 230 V is around 13 amps. There are a few things to check before using the machine for the first time.

  • Use a dedicated 16 A circuit. If the same circuit also supplies lights, workshop equipment or a fridge, the fuse will trip.
  • Starting current is higher than running current. Whether the circuit breaker can handle this depends on its trip characteristic. A type C breaker will generally handle the start-up current; a type B breaker may trip.
  • Use an extension lead of the correct size. A 1.5 mm² cross-section is only sufficient for short distances; from around 25 m, use 2.5 mm², and fully unwind the cable reel. An undersized or coiled cable is the most common reason an electric splitter will not start or loses power under load.

This is not specific to this machine; it applies to any high-powered 230 V motor. It is just rarely mentioned.

Hydraulics and maintenance

The system holds 4.5 litres of hydraulic oil; HLP 46 is recommended – a standard oil that is widely available, with no special premium. The initial fill is not included and must be carried out before first use; after that, the oil level is the only regular check. Oil and filters are the only items that need servicing on a log splitter. For seasonal use, it makes more sense to base oil changes on operating hours than calendar years; see the operating instructions for the intervals.

Safety

A log splitter is not a machine to operate casually – even one with 8 tonnes of force. The splitting area is the most dangerous part of the machine, and the most common injury occurs when reaching in while the blade is moving. Wear sturdy footwear, avoid gloves with loose cuffs, and keep other people out of the danger zone. The operating instructions are part of the safety equipment, not just a leaflet in the box.

Frequently asked questions

Will a standard socket be sufficient?

At 3,000 W and 230 V, the motor draws around 13 amps. A standard household 13 A socket is sufficient, but it should be on a dedicated 16 A circuit with no other equipment running on it. Extension leads must have a sufficient cross-section – 2.5 mm² for cable lengths of around 25 m or more – and cable reels must be fully unwound.

Can I split 33 cm stove logs with it?

Yes. The splitting length ranges from 10 to 55 cm, so the usual firewood lengths of 25 and 33 cm can be processed directly. This is the main difference from the larger PTO splitters in the range, which start at a splitting length of 56 cm.

Can I split metre-long logs?

No. The maximum splitting length is 55 cm. Metre-long pieces must be cut to length first.

Is 8 tonnes enough for beech and oak?

Yes, for straight-grained, knot-free pieces of moderate diameter. The force may not be sufficient for heavily knotted beech, twisted oak, forked trunks or frozen roundwood. If you mainly process this kind of wood, choose a machine with a higher splitting force.

How thick can the wood be?

The splitting diameter ranges from 8 to 30 cm. Larger logs must be sawn into smaller pieces first; here, it is the geometry of the splitting area, not the splitting force, that sets the limit.

Why is the forward speed so slow at 3.1 cm/s?

That is the trade-off for the force: the pump exchanges speed for pressure. This is clear from the return stroke, which requires no force – it runs at 17 cm/s, more than five times as fast. The adjustable stroke limiter can almost halve the cycle time when splitting short logs.

Is a splitting cross included?

No, the splitting cross is not included and is available as an accessory. Please follow the operating instructions when using splitting crosses.

Is a log lifter included?

No. A log lifter is not provided for this model. With a maximum splitting diameter of 30 cm and a maximum length of 55 cm, the logs remain within a weight range that can be handled by hand.

Which hydraulic oil is required, and is it included?

HLP 46 is recommended; the system holds 4.5 litres. The oil is not included and must be added before first use.