NERO Holzrückewagen 3 t mit Kran 3,88 m und Allradantrieb
€6,777.00
Standard equipment
- Loading crane with grapple
- Hydraulic four-wheel drive
- Hydraulic winch
- Independent oil supply with petrol engine
- Hydraulic stabilisers, two side-mounted
- Front protective grille
- Hitch for cars and tractors
- Front jockey wheel
- 4 pairs of stakes
Technical data
| Manufacturer | NERO |
|---|---|
| Product type | Timber trailer with loading crane |
| Load capacity | 3.000 kg |
| Unladen weight | approx. 900 kg |
| Dimensions (L × W × H) | 496 × 279 × 180 cm |
| Axles | Tandem |
| Pairs of stakes | 4 |
| Crane reach | 3,88 m |
| Crane slewing range | approx. 230° |
| Crane lifting capacity | 100 – 300 kg, depending on reach |
| Grapple opening | max. 70 cm |
| Wheel drive | hydraulic four-wheel drive |
| Winch | hydraulic, standard |
| Operating pressure | 20 MPa (200 bar) |
| Hydraulic oil | 12 l, HLP 46 |
| Engine oil | 0,6 l |
| Fuel | Petrol |
| Starter | Recoil starter |
| Tyres | 22 × 11 × 10 |
| Stabilisers | two side-mounted, hydraulic |
Product description
Timber trailer with independent oil supply
The trailer carries 3.000 kg and comes with everything needed for the job: a loading crane with a reach of 3,88 m, a hydraulic winch, hydraulic four-wheel drive and an independent oil supply with a 12-litre tank. The drawbar fits car tow bars and tractors.
The independent oil supply – the key feature
The trailer has its own hydraulic system.
| Independent oil supply | Tractor hydraulics | |
|---|---|---|
| Towing vehicle | Car, quad bike, compact tractor, tractor | tractor with auxiliary hydraulic circuit only |
| Hydraulic output | independent | dependent on the tractor |
| Hoses to towing vehicle | none | required |
| Operation with towing vehicle switched off | possible | no |
What this means in practice: The trailer can be towed by a car, off-road vehicle, quad bike, compact tractor or tractor. For woodland owners without a large tractor, this is often the only practical solution – and a small towing vehicle is an advantage on narrow extraction tracks anyway.
The second point: Hydraulic output is constant. A tractor with a limited auxiliary hydraulic circuit would make the crane sluggish – this one always works at the same speed.
Hydraulic four-wheel drive – the feature that matters in the forest
All the wheels are driven.
Why this makes a difference in forestry: A loaded timber trailer carrying 3.000 kg of timber, plus its own weight of 900 kg, weighs almost four tonnes.
- On soft forest ground an unbraked trailer sinks in and becomes a burden for the towing vehicle.
- On slopes the trailer pushes the towing vehicle – or gets stuck.
- In wet conditions and on leaf litter the towing vehicle alone lacks traction.
What the four-wheel drive does: The trailer helps push instead of being pulled. Traction is distributed across all the wheels in the combination – so the towing vehicle can be smaller.
The environmental benefit: Less wheel slip means less soil compaction and less damage to extraction tracks.
The 3,88 m crane reach
The crane slews through around 230° and lifts 100 to 300 kg, depending on reach.
Why lifting capacity decreases as reach increases: The crane acts as a lever. The further the arm extends, the greater the overturning moment – for the same load.
| Position | Lifting capacity |
|---|---|
| close to the trailer | up to 300 kg |
| full reach of 3,88 m | around 100 kg |
What 3,88 m means in practice: The trailer stays on the extraction track, while the crane reaches the timber in the stand – without the combination having to drive into it.
The real benefit is protecting the soil: Every trip off the extraction track causes lasting soil compaction. Areas within the crane's reach do not need to be driven over.
The 70 cm grapple opening
The grapple can grip trunks up to 70 cm wide.
What this means in practice:
- Individual large trunks up to this width.
- Several thin trunks in a bundle – the usual situation when thinning and collecting firewood.
Why bundling makes all the difference: When handling small-diameter timber, the grapple opening determines how many crane cycles are needed. Picking up three trunks at once takes a third of the time.
The hydraulic winch
It is included as standard.
What it is used for: Timber outside the crane's reach can be winched in – instead of driving the combination into the area.
Typical situations:
- Trunks on slopes below the extraction track.
- Timber behind obstacles – ditches, standing trees or rocks.
- Windblown timber in inaccessible locations.
- Individual trunks, where repositioning the trailer is not worthwhile.
The combination makes the trailer versatile: Timber within the crane's reach is gripped – timber further away is winched in and then loaded.
The hydraulic stabilisers
Two side-mounted stabilisers extend hydraulically.
Why this is important for safety: When operating the crane, the load acts on the side of the trailer. Without stabilisers, the trailer can tip sideways – especially at full reach and on soft or sloping ground.
The second benefit: The stabilisers take the load off the running gear. The tyres do not sink in while the crane is in use.
Hydraulic rather than mechanical means they can be extended from the operating position without getting off – saving time every time you move to a new location.
Tandem axle with 4 pairs of stakes
Two axles carry the load.
Why tandem axles are better in the forest:
- Better load distribution – lower ground pressure per wheel.
- More traction from more driven wheels.
- Smoother ride over roots and uneven ground.
- Greater stability when operating the crane.
The 4 pairs of stakes hold the load in place at the sides. More pairs provide better support – particularly for short lengths of timber that would otherwise slip through.
The front protective grille
It is fitted at the front of the stake frame.
What it prevents: When braking or travelling downhill, the load can slide forwards. Without the grille, it can hit the towing vehicle – and when dealing with trunks weighing several hundred kilograms, this is not just a risk of damage to property, but a danger to the driver.
Drawbar for cars and tractors
The trailer can be hitched to either type of vehicle.
How this adds flexibility: You can transport the trailer to the woodland using a car, then work in the stand with a tractor – or use the same vehicle for both.
Important information about road approval: Check before buying whether, and under what conditions, the trailer may be used on public roads. Many timber trailers of this type are not approved for road use and are transported on a trailer.
Operating pressure of 20 MPa and 12 litres of hydraulic oil
The system operates at 200 bar.
What the oil tank capacity means: 12 litres is sufficient for the crane, winch, drive and stabilisers – with a smaller tank, the oil would get too hot during continuous operation.
HLP 46 oil is a standard hydraulic oil that is widely available.
Applications
Private woodland and small private forests, firewood processing, thinning, part-time forestry, farms with woodland, landscape maintenance, windblown timber clearance, local authorities and public works departments.
Operating notes
- Check road approval before buying – whether the trailer may be used on public roads.
- Check the towing capacity and nose weight of the towing vehicle – when loaded, the combination weighs almost four tonnes.
- Extend the stabilisers before every crane operation – even when handling small loads.
- Observe the crane's lifting capacity: 300 kg close to the trailer, around 100 kg at full reach.
- Set the stabilisers on firm, as level ground as possible.
- Do not enter the crane's slewing area or stand beneath the load.
- Keep a safe distance when operating the winch – cables can break and whip back.
- Distribute the load evenly and secure it against slipping.
- Check the engine and hydraulic oil levels before every use.
- Regularly check hydraulic hoses for chafing.
- When working in the forest, follow the accident prevention regulations for forestry work and wear personal protective equipment.
- After use, remove dirt and bark residue; lubricate grease points as specified by the manufacturer.
- For extended periods out of use, drain or stabilise the fuel.
Frequently asked questions
Do I need a tractor?
No. The trailer has its own oil supply with a petrol engine – the crane, winch and drive operate independently of the towing vehicle. The drawbar fits car tow bars and tractors.
How much can the trailer carry?
3.000 kg, with an unladen weight of 900 kg. When loaded, the combination weighs almost four tonnes – the towing vehicle's towing capacity and nose weight must be sufficient.
What are the benefits of hydraulic four-wheel drive?
The trailer helps push instead of being pulled. This is crucial on soft forest ground and on slopes – and it means the towing vehicle can be smaller.
What is the crane's reach?
3,88 m, with a slewing range of around 230°. Lifting capacity is 300 kg close to the trailer and around 100 kg at full reach.
What is the winch for?
For timber outside the crane's reach – on slopes, behind obstacles or where trees have been blown down. It is winched in instead of driving the combination into the area.
Do I need to use the stabilisers?
Yes, before every crane operation. When lifting, the load acts sideways – without stabilisers, the trailer can tip, especially at full reach and on soft ground.
How wide does the grapple open?
Up to 70 cm. It can grip individual large trunks or several thin ones in a bundle.
Can I use it on the road?
Check this before buying. Many timber trailers of this type are not approved for public road use and are transported on a trailer.