Skip to main content Skip to search Skip to main navigation
Menu

Nachrüstsatz hydraulische Gerätebetätigung

Description
Max. power (kW/PS):

44/60

Additional information:

1. Lower the front loader and attachment to the ground.
2. Set the desired tipping angle using dimension "K".
3. Position the attachment control with the cylinder extended on the loader arm (tack it in place) and connect it at point "A".
4. Connect the hoses, raise the front loader fully and tip out the attachment. If the tipping angle is correct, you can weld the attachment control in place.
5. If the tipping angle is too small:
• Reduce dimension "C" (the tipping angle increases, tractive force decreases)
• Move the attachment control forwards on the loader arm.
Caution: The push rods must not come into contact with the bucket!

Figure number:

2

Properties
Leistung max. (kW/PS): 44/60
Product group: Anbaugeräte