MX Folienballenzange MANUBAL C40 für Frontlader, 1.200 kg Tragkraft
€2,264.00
Scope of delivery
- 1 × MX MANUBAL C40 film bale clamp with bolt-on mounting (Bolt-on Euro mounting)
- Non-return valve (Non-Return Valve) – standard
- 2 floating arms with synchronised opening and closing
- Adjustable rear support tubes
- Wear bushes at all pivot points
Not included: Hydraulic hoses to the front loader (depending on loader type), adapter for FAUCHEUX or non-brand-specific mounting (available as an option).
Technical data
| Model | MANUBAL C40 |
|---|---|
| Type | Film bale clamp (Film Bale Clamp) – for round and wrapped bales |
| Manufacturer | MX (M-extend Group) |
| Mounting | Bolt-on Euro mounting – standard |
| Overall width | 1.620 mm |
|---|---|
| Clamp width | 1.350 mm |
| Clamp height | 740 mm |
| Finger opening (min.) | 320 mm |
| Finger opening (max.) | 1.750 mm |
| Weight | 245 kg |
| Max. permissible load capacity | 1.200 kg |
|---|---|
| Bale diameter | 0,90 m to 1,80 m |
| Min. front loader lifting capacity (at max. height) | 1.350 kg |
| Min. front loader lift height | 3,60 m at pivot point |
| Hydraulic cylinder | 1 × double-acting |
|---|---|
| Non-return valve | Standard (prevents opening if a hose breaks) |
| Frame | Reinforced box-section frame |
|---|---|
| Floating arms | 2, synchronised opening/closing |
| Pivot points | Wear bushes (replaceable) |
| Support tubes | Adjustable, rear-mounted |
| Power Control System® | Regulates clamping force – prevents damage to the film |
|---|---|
| Mach 2 NS socket | Quick-change socket for MX attachments |
| Speed-Link socket | Hydraulic quick coupling for tool-free attachment changes |
| FAUCHEUX mounting | Mounting adapter for FAUCHEUX front loaders |
| Non-brand-specific mounting | Universal adapter for non-Euro front loaders |
| Special paint finish | Colour matched to tractor/front loader |
Product description
Who this bale clamp is designed for
The MX MANUBAL C40 is a film bale clamp for front loaders on medium- to high-powered tractors. It grips round bales from 0,90 to 1,80 m in diameter – covering the common sizes of wrapped silage, hay and straw bales. Typical applications:
- Dairy farms: Collect wrapped bales from storage, transport them to the feed barrier and load them onto the mixer wagon. The C40 is designed for the daily handling of wrapped silage bales.
- Grassland farms selling bales: Load bales from the field, stack them and put them on the trailer. The working range up to 1,80 m also covers oversized bales.
- Agricultural contractors: If you handle other people’s bales of different diameters, you need the 0,90–1,80 m range. The C40 covers this without needing to change equipment.
- Biogas plants: Move wrapped bales from the delivery area to the pre-pit feeder – the non-return valve prevents a bale from falling uncontrollably if the hydraulics fail.
Minimum front loader requirements: 1.350 kg lifting capacity at maximum height and 3,60 m lift height at the pivot point. This corresponds to front loaders for tractors in the 100–150 hp class, e.g. Quicke Q66, Stoll FZ 50.1, MX U 314 or similar.
Film bale clamp vs standard bale clamp – which one is right for you?
| Criterion | Film bale clamp (C40) | Open bale clamp / bale spike |
|---|---|---|
| Film protection | Yes – tines grip underneath the bale, leaving the film intact | No – the spike pierces the film, allowing air to enter |
| Silage quality | Preserved – no air enters through damage | At risk – secondary fermentation and mould at the puncture site |
| Bale shapes | Round bales only | Round and square bales (depending on design) |
| Attachment weight | 245 kg – heavier | approx. 50–80 kg – considerably lighter |
| Price | Higher | Considerably cheaper |
| Application | Wrapped bales, valuable silage | Hay and straw bales without film |
Rule of thumb: If you handle wrapped bales (wrapped silage, baler-wrapper combinations), you need a film bale clamp. A bale spike is cheaper and lighter, but punctures the film every time – compromising the silage quality. For hay and straw bales without film, a bale spike is the more economical choice.
Synchronised floating arms – why they matter for wrapped bales
The C40 has two synchronised floating arms that open and close evenly. This means the bale is gripped centrally, regardless of its diameter. With a clamp that has one fixed arm and one moving arm, the bale shifts sideways as it is gripped – a problem with wrapped bales on a trailer, as the bale may slip or press against the sideboard.
Synchronised opening has another advantage: the driver does not need to make sideways corrections with the front loader when gripping bales of different sizes. This saves time when handling bales – especially when collecting 50 bales from the field in one go.
Non-return valve – standard and essential
The non-return valve (Non-Return Valve, also known as a check valve) is fitted as standard on the C40. It holds the hydraulic pressure in the cylinder if a hydraulic hose bursts or the engine stalls. Without this valve, the clamp would open immediately if a hose broke – and an 800 kg silage bale would fall uncontrollably from a height of 3 metres.
On competing products, the non-return valve is often a chargeable option. On the C40 it is standard – for a clamp that regularly works above head height, this is not a comfort feature but a matter of workplace safety.
Bolt-on mounting – why not welded?
The C40 is supplied as standard with a bolt-on Euro mounting. Unlike a welded Euro mounting, the bolt-on mounting can be replaced with other mounting systems – e.g. FAUCHEUX, MX-specific or non-brand-specific. This makes the clamp independent of the front loader: if you change tractor or front loader, you only need to change the mounting, not the entire clamp.
The downside compared with a welded mounting is that the bolted joint has a small amount of play. This is irrelevant for a bale clamp that does not need to perform precision work – the benefit of being able to change the mounting outweighs this.
Power Control System® – the most important option
The Power Control System® is the most frequently ordered option for the MANUBAL range. It regulates the clamping force applied to the bale by the clamp. Without Power Control, the front loader’s full hydraulic pressure is applied to the bale – this can dent or damage delicate wrapping film, especially on freshly wrapped bales where the film is still soft.
With Power Control, the driver sets a maximum clamping pressure. The clamp grips the bale firmly enough for safe transport, but not with the full hydraulic force that could crush the film. This is less critical for farms handling only their own bales of the same size. For contractors transporting bales with varying wrapping quality from different farms, Power Control is a worthwhile safeguard – every damaged bale is a loss.
What the MANUBAL C40 does not have – and why
No rotator: The C40 does not rotate the bale. If you need to turn bales in storage (e.g. for optimum stacking), you need a bale clamp with a rotator – this is a different class of equipment and price range.
Not suitable for square bales: The floating arms are designed for round bales. Square bales (Heston format) cannot be gripped safely – MX offers the MANUBAL U range (universal clamp) for this purpose.
Not suitable for bales under 0,90 m: The minimum finger opening is 320 mm. The C40 is too large for small round bales from mini balers (0,50–0,80 m) – the smaller MANUBAL C30 is suitable for these.
Where the MANUBAL C40 fits in the MX bale clamp range
| Model | Type | Weight | Bale diameter | Max. load capacity | Min. lifting capacity | For |
|---|---|---|---|---|---|---|
| MANUBAL C30 | Film bale clamp | 135 kg | 0,80–1,45 m | 800 kg | 850 kg | Compact tractors, small bales |
| MANUBAL C40 | Film bale clamp | 245 kg | 0,90–1,80 m | 1.200 kg | 1.350 kg | Standard and oversized bales |
The C40 is the large film bale clamp in the MX range. It covers the full range from standard round bales (1,20–1,50 m) to oversized bales (1,80 m). The smaller C30 is designed for compact tractors with lower lifting capacity and smaller bales – if you handle standard bales from 1,20 m in diameter, you need the C40.
Frequently asked questions
Will the MANUBAL C40 fit my front loader?
The clamp is supplied with a bolt-on Euro mounting. Euro is the most common mounting standard on front loaders in Europe. If your front loader has a Euro mounting, the clamp will fit directly. MX offers mounting adapters as an option for FAUCHEUX front loaders or other non-Euro systems. Your front loader must have at least 1.350 kg lifting capacity at maximum height and a 3,60 m lift height at the pivot point.
Do I need the Power Control System?
If you regularly handle wrapped bales with varying wrapping quality – e.g. as an agricultural contractor or when handling purchased bales – yes. The Power Control System regulates the clamping force and prevents delicate film from being dented. If you handle your own bales of consistent quality, you can do without it, provided the film is strong enough.
Can I also grip hay and straw bales without film with the C40?
Yes. The clamp grips all round bales from 0,90 to 1,80 m in diameter, with or without film. For bales without film, the clamp’s film protection is not needed – a simple bale spike would be the cheaper alternative. The C40 is worthwhile if you handle both wrapped and unwrapped bales and want to keep just one attachment.
What is the difference between the MANUBAL C30 and C40?
The C30 (135 kg) is designed for compact tractors and smaller bales up to 1,45 m in diameter, with a maximum load capacity of 800 kg. The C40 (245 kg) grips bales up to 1,80 m, carries up to 1.200 kg and requires a front loader with at least 1.350 kg lifting capacity. For standard round bales from 1,20 m in diameter and tractors from around 100 hp, the C40 is the right choice.
Is the non-return valve really standard?
Yes. The non-return valve (Non-Return Valve) is included as standard with the MANUBAL C40. It keeps the clamp closed if the hydraulics fail, so the bale remains securely gripped. On some competing products, this valve is a chargeable option.
| Cultivation method: | Aufnahme Frontlader |
|---|---|
| Einsatzklasse: | Standard |
| Gerätetyp : | Ballentechnik |