MOBIMAxx 54 l/min-14.3 gpm-12 V-DC ABK-ZVD-4 m 23519

Technical data

Connection cable with tap-off terminals, length (m) / (ft) 3 / 10

Connection on suction side G 1'' i

Connection on pressure side G 1'' i

Hydraulic data

Pump type Vane pump, self-priming

Delivery rate with free discharge up to (l/min) / (gpm) 54 / 14.3

Suction head up to (m) / (ft) 3 / 10

Delivery pressure up to (bar) / (psi) 1.8 / 26.1

Pumped media Heating oil and diesel fuels

Motor data

Insulation class F

Maximum permissible limit temperature (°C) / (°F) 155 / 311

Voltage (V) 12 V DC

Current consumption (A) 30

Power (W) 360

Fuse (A) 40 A Plug-in fuse

Duty cycle with free outlet max. (min) 180

Running time (min) with closed dispensing valve max. 2

Torque (Nm) 0.66

Speed (rpm) 2500

Design IMB 5

Protection class IP66

Materials of wetted parts

Seals FKM (Viton®)/NBR

Pump housing AlSi 12 (seawater-resistant)

Stator GG 25

Vane POM

Specification

Vane pump with integrated bypass (23 406)

On and off switch

Safety device

Siphon protection according to WHG (Water Resources Act), permanently effective

Dispensing valve for diesel with swivel joint, ZVD (23 171)

Delivery hose, 4 m / 13.1 ft, DN 19, G 1" a, G 1" i (23 155 957)

Suction hose, 1.6 m / 5.2 ft, DN 25, G 1" a, G 1" i (23 156)

Foot valve with suction strainer (19 890)

Installation of flow meter NUMERIxx³, three-digit, possible (23 192)

Special features

First-class electric machine and pump construction

Continuous operation - 3 hours - with open valve

Lapped shaft ring seal set

Encapsulation of the electric motor, which largely prevents the formation of condensation that causes short circuits in the event of large temperature fluctuations

Pump housing can be freely positioned in all 90° positions

Switch housing can be freely positioned in all 90° positions

Switch housing in impact-resistant die-cast zinc coated by means of cataphoresis

Pump housing made of seawater-resistant die-cast aluminium, coated using cataphoresis

Motor housing completely galvanised, exterior coated

Tight tolerances ensure high suction and pressure performance with optimum efficiency

The material pairing vane - stator guarantees dimensional stability of the vane up to 200 °C / 392 °F

Low weight and exceptionally long service life due to choice of material