MAHLE gear reduction starter 12V 3,2kW 9Z - fits Fiat, New Holland, Case IH, Laverda and others
€375.53
MAHLE gear reduction starter 12V 3,2kW 9Z
This starter motor starts the engine reliably – even in cold weather and after long standstill. Ideal as a replacement on tractors, construction machines and commercial vehicles.
Technical data
| Rated voltage (V) | 12 |
|---|---|
| Rated power (kW) | 3,2 |
| Number of pinion teeth | 9 |
| Holes / pitch circle Ø (mm) | 3 x 12,2 / 146,0 |
| Flange ↔ pinion (mm) | 30,0 |
| Spigot Ø (mm) | 110,0 |
| Mounting angle (°) | l 55 |
| Direction of rotation | ↻ |
| Design | GR |
| Ratings (V / kW / teeth) | 12 / 3,2 / 9 |
| Weight | 9,37 kg |
Suitable for the following manufacturers
Benfra
Series 9: 9.09, 9.10
Series 215 → 515: 215
Case IH
Series Motor Iveco/FPT: Motor Iveco/FPT 8045
Series JX: JX 85
Series JXN: JX 1095 N (12/04-)
Series JXU: JX 70U, JX 80U, JX 90U, JX 100U
Series JXV: JX 1095 V (12/04-)
Fiat
Series 46: 65-46
Series 56: 70-56
Series 66: 65-66, 65-66 S, 70-66, 70-66 F, 70-66 LP, 70-66 S, 80-66, 80-66 F, 80-66 S, 666, 766
Series 70: 670
Series 76: 70-76 F, 70-76 LP, 70-76 V, 80-76 F
Series 80: 680, 780, 880, 1380
Series 86: 55-86 F, 55-86 S V, 55-86 V, 72-86 F, 72-86 LP, 82-86 F, 82-86 LP
Series 88: 65-88, 70-88, 80-88
Series 90: 65-90, 70-90, 80-90, 85-90, 90-90, 100-90, 110-90, 115-90, 130-90, 140-90, 160-90, 180-90
Series 93: 65-93, 72-93, 82-93, 88-93
Series 94: 65-94, 72-94, 82-94, 88-94
Series 355 → 955: 605, 655, 765, 855
Series Diamante: 615
Series L: L 60, L 65, L 75, L 85, L 95
Series Nastro D'Oro: 600, 640, 650, 1000, 1300
Series TK: 70-65, 70-65 M, 70-75, 70-75 M, 72-85, 72-85 M, 80-65, 80-75, 82-85, 85-55, 88-85, 95-55, 100-55
Series Winner F100: F 100, F 110, F 115, F 120, F 130, F 140
Fiat Allis
Series Allis FL: FL 4
Ford
Series 10: 3010, 4010, 5010
Laverda
Series 3000: 3350, 3450, 3600
Series M: M 112, M 132
New Holland
Series LB: LB75
Series LM: LM410, LM420, LM425 (10/01-12/03), LM430, LM630, LM640
Series T4000: T4030
Series TD: TD60, TD70, TD75D (11/02-), TD80, TD85D (11/02-), TD90, TD95, TD95D (11/02-)
Series TK: TK76, TK80, TK85, TK90, TK95, TK100
Series TK-A: TK80A, TK90A, TK100A
Series TL: TL65, TL70, TL80, TL90, TL100
Series TN: TN95
Series VN: VN260
Good to know
- Before ordering, please compare the technical data and the cross-reference number with your original part.
- Not sure whether the part fits? Send us the vehicle type and chassis number – we will check it for you.
| Anzahl Ritzelzähne: | 9 |
|---|---|
| Artikelart: | MAHLE Gesamtübersicht, Starter |
| Bohrungen / Lochkreis-Ø (mm): | 3 x 12,2 / 146,0 |
| Direction of rotation: | ↻ |
| Einbauwinkel (°): | l 55 |
| Einpassung Ø (mm): | 110,0 |
| Flansch ↔ Ritzel (mm): | 30,0 |
| Nennleistung (kW): | 3,2 |
| Nennspannung (V): | 12 |
| Nennwerte (V / kW / Zähne): | 12 / 3,2 / 9 |
| Product group: | Elektrik, Starter |
| Suitable for make: | Benfra, Case IH, Fiat, Fiat Allis, ford, Laverda, New Holland |
| Bauart: | GR |