Skip to main content Skip to search Skip to main navigation

Menu

GRANIT Antifreeze Concentrate Silicate-Free P12+ - 20L

Description

GRANIT Antifreeze Concentrate Silicate-Free P12+ - 20L

Container:
20 litres
Colour:
red / violet
Execution:
GRANIT Radiator Antifreeze - Silicate-free is a silicate-, nitrite-, amine-, borate- and phosphate-free radiator antifreeze concentrate based on ethylene glycol with an additive package based on OAT technology.
Description:
GRANIT Radiator Antifreeze - Silicate-free offers reliable corrosion protection in conventional and aluminium engines of passenger cars up to 250,000 km, in commercial vehicle and bus engines up to 500,000 km and in stationary engines up to 16,000 operating hours. When changing, please drain and flush cooling systems, heating systems and expansion tanks. The operating time of 3-5 years should not be exceeded, which is why the replacement intervals of the vehicle or unit manufacturer must be observed.

- Excellent long-term corrosion protection
- Optimum seal and rubber compatibility
- Optimum hard water stability
- Optimum heat transfer
- Optimum cost-effectiveness through long-term protection
- Optimum frost protection
- Optimum protection against overheating
- Very good long-term stability


Application:
Antifreeze mixing ratio:
- 1/2 Frost protection : 1/2 Water -37 °C
- 2/5 Frost protection : 3/5 Water -27 °C
- 1/3 antifreeze : 2/3 water -20 °C

- Radiator protection concentrate GRANIT Radiator Antifreeze - Silicate-free Never use pure, always mix with water
- Ensure the correct preparation water (clean water) in accordance with the manufacturer's instructions
- Ensure the correct mixing ratio
- If in doubt, switch to ready-mix
- Radiator protection agents of different technologies should not be mixed with each other
- Follow the unit manufacturer's instructions
- The concentration of GRANIT Radiator Antifreeze - Silicate-free should never be less than 33% and never more than 60%
PU:
1
Additional information:
When changing, please drain and flush cooling systems, heating systems and expansion tanks. Do not exceed the change intervals for radiator protection agents specified by the respective manufacturer. The concentration should never be less than 33% and never more than 60%.
Area of application:
It is particularly suitable for aluminium engines and allows replacement intervals of up to a maximum of five years.
Packaging type:
Bottle
Classification:
AFNOR N FR 15-601, ASTM D 3306, ASTM D 4985, BS 6580:2010, CUNA NC 956-16, FFV booklet R443, JIS K 2234:2018, NATO S-759, Önorm V 5123, SAE J 1034, UNE 26-361 - 88