Skip to main content Skip to search Skip to main navigation
Menu

Frontlader Nachrüstsatz für hydraulische Gerätebetätigung

Description
Max. power (kW/PS):

74/100

Additional information:

1. Lower the front loader with the implement onto the ground.
2. Set the required tipping angle using dimension "K".
3. Position the implement control with the cylinder extended on the boom (tack it in place) and connect it at point "A".
4. Connect the hoses, raise the front loader fully and tip the implement. If the tipping angle is correct, you can weld the implement control in place.
5. If the tipping angle is too small:
• Reduce dimension "C" (the tipping angle increases, tractive force decreases)
• Move the implement control forwards on the boom.
Caution: The push rods must not come into contact with the bucket!

Figure number:

1

Properties
Leistung max. (kW/PS): 74/100
Product group: Anbaugeräte