Fliegl volume bucket »Standard«, 2600 mm, painted; Volume approx. 1.30 m³; Depth 920 mm; Height 820 mm
€1,443.75
Features
- Euro-Norm mounting
- Formed from a single piece, with reinforcing profile
- Reinforced floor
- Tapered design
- Scraper edge made of HB 500, 150 × 16 mm
- Painted finish
Technical data
| Manufacturer | FLIEGL |
|---|---|
| Product type | High-volume bucket |
| Working width | 2.600 mm |
| Capacity | approx. 1,30 m³ |
| Depth | 920 mm |
| Height | 820 mm |
| Scraper edge | HB 500, width 150 mm, thickness 16 mm |
| Unladen weight | approx. 330 kg |
| Mounting | Euro-Norm |
| Design | tapered, formed from a single piece |
| Surface finish | painted |
Product description
High-volume bucket with 1.3 m³ capacity
The bucket is formed from a single piece and features a reinforcing profile. Its tapered design helps bulk material slide out more easily, and the floor is reinforced.
Formed from a single piece – the key design feature
This is what sets the bucket apart from welded designs.
| Welded bucket | Formed from a single piece | |
|---|---|---|
| Floor/rear wall junction | Weld seam | continuous sheet metal |
| Weak point | the seam | none |
| Material flow | edge at the seam | even radius |
| Cleaning | residue at the seam | smooth surface |
Why weld seams are a critical point: The greatest forces act at the junction between the floor and rear wall. This is where the load is concentrated as the bucket enters the pile – and a weld seam always represents a change in the material.
The second advantage is improved material flow: An even radius helps material flow more freely when filling and emptying. Material catches on an internal edge – especially when handling damp bulk material.
The reinforcing profile also absorbs forces without interrupting the base sheet.
The tapered design
The bucket narrows towards the rear.
What this does: When tipping, the material has a clear path forwards – it does not have to be pushed through a constant cross-section.
Why this matters for certain materials:
- Damp soil and clay stick to the walls and remain trapped at the rear.
- Silage and manure mat together and come out as a block, or not at all.
- Compost and cohesive materials bridge across the bucket.
What happens without a tapered shape: The bucket does not empty completely. The operator has to shake it – costing time and putting strain on the hydraulics.
An added benefit: Less residual material means less contamination when changing materials – important when loading grain and manure one after the other.
The reinforced floor
It takes the wear.
Why the underside is critical: When entering a pile and clearing material, the floor scrapes along the ground.
- On concrete this acts like sandpaper – steadily and continuously.
- On gravel there are impacts as well.
- Wear is uneven and concentrated in strips.
What happens when the floor wears through: The bucket becomes unusable. Repairing a floor plate that has worn through is rarely worthwhile – the material is weakened over a large area, not just at one point.
HB 500 scraper edge
150 mm wide, 16 mm thick.
What HB 500 means: A Brinell hardness of around 500 – about three times that of standard structural steel.
Why this component in particular: The scraper edge is the first part to contact the material and is dragged along the ground. It wears faster than any other part of the bucket.
What a blunt scraper edge means:
- The bucket no longer penetrates, but pushes the pile ahead of it.
- Power requirements increase – the loader is working against the material.
- The fill volume decreases for the same amount of work.
- The front axle is put under greater strain, as more pushing force is needed.
The 16 mm thickness at a width of 150 mm provides a substantial wear reserve.
1.3 m³ at 2.600 mm wide – the design
The proportions indicate what the bucket is designed for.
| Working width | 2.600 mm |
|---|---|
| Depth | 920 mm |
| Height | 820 mm |
| Volume | 1,30 m³ |
What this means: Wide but shallow – the bucket is designed for covering ground efficiently, not for maximum volume per load.
What it is suited to: Clearing farmyards, working across wide accessways in a single pass, and pushing material together from large areas.
The comparison makes this clear: The bulk material bucket of the same width holds 3.7 m³ at a depth of 1.570 mm – it is designed for lightweight material and maximum volume. This bucket is the more versatile, compact option.
Calculating the weight
| Material | Density | Total including bucket |
|---|---|---|
| Wood chips | approx. 250 kg/m³ | around 655 kg |
| Silage | approx. 700 kg/m³ | around 1.240 kg |
| Grain | approx. 750 kg/m³ | around 1.305 kg |
| Soil, damp | approx. 1.600 kg/m³ | around 2.410 kg |
| Gravel | approx. 1.800 kg/m³ | around 2.670 kg |
What this means in practice: With a capacity of 1.3 m³, the total weight remains within the lifting capacity of typical front loaders, even with heavy materials. This makes the bucket more versatile than high-volume versions.
One thing to check: The loader's rated tipping load at the working height – stability is at its lowest when loading over the cab.
The Euro-Norm mounting
The bucket fits front loaders with a Euro-Norm quick coupler.
What this means: Euro-Norm is the most widely used system for agricultural front loaders. You can change between the bucket, grab, pallet forks and bale grab without tools.
The difference compared with model-specific mountings: No compatibility check is needed here – the bucket is ready to order straight away.
Suitable materials
- Soil and excavated material
- Sand, gravel and crushed stone
- Grain and animal feed
- Silage and manure
- Compost and bark mulch
- Snow and cleared material
The tapered shape and moderate capacity make this a versatile bucket – it is not specialised for a single type of material.
Painted finish
The bucket is painted.
What this means in use: This is sufficient for soil, gravel, grain and general bulk materials.
Where a galvanised finish would be better: for continuous contact with silage, slurry or manure. Silage juice is acidic and attacks paint where it is scratched – and scratches are unavoidable during loading.
Practical tip: The mounting surfaces should be cleaned regularly. The paint will wear off there anyway, and corrosion on the locking mechanisms is a safety issue.
Applications
Farms, agricultural contractors, landscaping businesses, local authorities and public works depots, riding schools and equestrian businesses, biogas plants, construction and trade businesses, equipment hire companies.
Operating instructions
- Check the loader's rated tipping load – when full, the bucket weighs between 650 and 2.700 kg, depending on the material.
- Check that the mounting is fully locked after every change.
- Keep the bucket level rather than pushing it along the ground – this protects the floor and scraper edge.
- Do not use as a lifting tool or for pushing sideways.
- When filling high containers, ensure the machine is stable and visibility is clear.
- Never stand beneath a raised bucket.
- Check the scraper edge regularly for wear; a blunt edge increases power requirements and puts more strain on the loader.
- Check the floor for wear.
- Clean the bucket after use with silage, slurry or manure.
- Keep the mounting surfaces clean; corrosion on the locking mechanisms is a safety issue.
Frequently asked questions
What is the bucket's capacity?
Around 1,30 m³, with a working width of 2.600 mm, a depth of 920 mm and a height of 820 mm.
Which vehicles does the bucket fit?
Front loaders with a Euro-Norm mounting – the most widely used system in agriculture. No compatibility check is needed beforehand.
What does “formed from a single piece” mean?
The junction between the floor and rear wall is made from continuous sheet metal rather than a weld seam. This is where the greatest forces act – a seam would be the weak point.
Why a tapered design?
The bucket narrows towards the rear. When tipping, the material has a clear path forwards – damp soil, silage and cohesive materials slide out more easily.
What does HB 500 mean?
A Brinell hardness of around 500 – about three times that of standard structural steel. The scraper edge measures 150 × 16 mm.
How heavy is the bucket when full?
Around 330 kg when empty. Around 1.305 kg with grain, around 2.410 kg with damp soil and around 2.670 kg with gravel.
Can I use it to load heavy materials?
Yes. Thanks to its moderate capacity of 1.3 m³, the total weight remains within the lifting capacity of typical front loaders, even with gravel and soil.
Why is the floor reinforced?
It takes the wear caused by scraping along the ground. Once the floor plate has worn through, repairs are rarely worthwhile.
| Gerätetyp : | Schaufel |
|---|---|
| Working width: | 2.60m |
| volume: | 1300L |