Skip to main content Skip to search Skip to main navigation
Menu

Fliegl transfer auger 4 m, stainless steel; Auger length 4000 mm; Outer Ø 154 mm; 1.5 m³/min

Skip product gallery

Zubehör / Ersatzteile

OPTION Fliegl transition adapter, outer Ø 154 mm for transfer auger 4 m
Prod. no.: FAC-AZKJFM900033
Hersteller:

Regular price: €270.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Features

  • Stainless steel auger
  • Direct mounting on the grain slide
  • Cable winch for height adjustment
  • Control unit for switching on and off
  • Folds mechanically

Technical data

ManufacturerFLIEGL
Product typeFolding transfer auger
Length4.000 mm
DiameterØ 154 mm
Conveying capacity1,5 m³/min
MaterialStainless steel
Mountingdirectly on the grain slide
Height adjustmentCable winch
FoldingMechanical
Connections required1 × double-acting
Control unitIncluded in delivery

Product description

4-metre transfer auger

The auger is mounted directly on the grain slide and conveys 1,5 m³ per minute. It is made of stainless steel, its height can be adjusted using a cable winch, and it folds mechanically for road travel.

Mounted on the grain slide – the key feature

The auger uses the existing opening.

What is a grain slide? A closable opening in the rear wall of tipping trailers and bodies, allowing grain to flow out in a controlled manner without opening the entire rear wall.

Why direct mounting is the elegant solution:

  • No modifications to the body. The opening is already there.
  • No additional discharge point and therefore no new risk of leaks.
  • Can be retrofitted to existing vehicles.
  • Removable – the tipping trailer remains a tipping trailer.

The result: A standard three-way tipping trailer can transfer grain in a controlled manner into a pit, elevator, trailer or silo. Without an auger, the only option is to tip it into a heap.

1,5 m³ per minute – what that means

The conveying capacity determines how long a transfer operation takes.

LoadCalculated unloading time
5 m³approx. 3.5 minutes
10 m³approx. 7 minutes
15 m³approx. 10 minutes

These figures are indicative only. Actual performance depends on how the material flows – wheat flows differently from oilseed rape, and damp grain differently from dry grain.

How the time saved compares: Tipping takes a minute – but the material is then left in a heap and has to be handled again. With the auger, it goes straight where it needs to go.

Ø 154 mm – the geometry

The diameter, together with the rotational speed, determines the conveying capacity.

What a slim auger offers:

  • Lower weight at the extended end – important with a length of 4 m.
  • Lower power requirement for the drive.
  • More precise positioning of the outlet.

Why the length needs to suit the application: 4 m is enough to convey over a sideboard into a trailer parked alongside or into a reception pit. A longer version is needed for high silos and transfers to greater heights.

Stainless steel – and why it matters for grain

The auger is made entirely of stainless steel.

The three reasons:

  • Hygiene. Grain is a food and animal feed. Stainless steel can be cleaned without leaving residues, unlike painted or galvanised steel.
  • No rust particles in the product. Otherwise, flaking rust could end up directly in the grain.
  • Durability. Grain contains moisture, and the auger often stands unused for months between jobs.

The practical point about service life: A transfer auger is used every day for weeks during harvest – then it stands unused for eleven months. It is precisely during this time that corrosion eats away at unsuitable materials.

For businesses with quality management systems – QS, GMP+ and contract farming – the choice of material is also something that can be documented.

Cable winch for height adjustment

It determines where the material is discharged.

Why height adjustment is necessary: The discharge point is not always at the same height.

DestinationRequired position
Reception pitlow, close to the ground
Trailer alongsideabove sideboard height
Elevator or hopperat filling height
Storage bayas high as possible

Why use a cable winch instead of hydraulics? The winch operates independently of the vehicle. It does not need an additional hydraulic circuit – leaving the one available connection free for the auger drive.

The second advantage: A cable winch holds its position without pressure. A hydraulic cylinder would slowly sink if it developed a leak.

Folds mechanically – greater safety on the road

The manufacturer explicitly states this.

Why this is not optional: A 4 m auger that protrudes to the side or rear exceeds the permitted vehicle dimensions.

  • Side overhang endangers oncoming traffic and cyclists.
  • Rear overhang is permitted only to a limited extent and with appropriate marking.
  • During inspections you risk being reported and prohibited from continuing your journey.
  • In the event of an accident there may be insurance implications.

What folding achieves: The auger folds against the vehicle for road travel. The permitted transport dimensions are maintained, without having to remove the auger.

Mechanical rather than hydraulic means one simple action, no additional hydraulic connection – and no function that can fail.

One double-acting connection

The auger is hydraulically driven.

The control unit supplied switches it on and off.

Why one connection is enough: Folding is mechanical, and height adjustment is via the cable winch. Neither uses a hydraulic circuit – the one connection is reserved for the drive.

What this means in practice: The auger is compatible with practically any towing vehicle. A tractor with just one spare spool valve is sufficient.

What the auger is used for

  • Transferring grain – from a tipping trailer into a pit, elevator or trailer
  • Filling storage bays
  • Transferring between vehicles
  • Controlled discharge instead of tipping into a heap

A typical harvest workflow: The combine loads the tipping trailer, which then drives back to the farm and transfers the grain – without a loader having to handle the grain again.

Applications

Arable farms, agricultural contractors, grain merchants, mills and intake facilities, biogas plants, animal feed mills, farming partnerships and seed processing facilities.

Operating notes

  • Mounting on the grain slide – check compatibility with the existing vehicle beforehand.
  • A double-acting connection on the towing vehicle is required.
  • Fold and secure the auger before every road journey.
  • Observe transport dimensions and marking requirements.
  • Adjust the height only when the auger is stationary.
  • Position the outlet correctly before switching on.
  • Never reach into the running auger – not even to clear a blockage.
  • Do not stand beneath the raised auger.
  • If a blockage occurs, switch off the drive, secure the vehicle and only then intervene.
  • Ensure the vehicle is stable – the extended auger shifts the centre of gravity.
  • Do not remove guards or covers.
  • Empty and clean the auger after use – grain residues attract moisture and encourage pest infestations.
  • Check the cable winch and cable regularly for damage.
  • Lubricate bearing points as specified by the manufacturer.

Frequently asked questions

How is the auger mounted?

Directly on the grain slide. It uses the existing opening, so no modifications to the body are required.

How much can the auger convey?

1,5 m³ per minute. A 10 m³ load can therefore be transferred in around seven minutes, in theory.

How many hydraulic connections do I need?

One double-acting connection for the drive. Folding is mechanical and height adjustment is via the cable winch, so neither requires another hydraulic circuit.

Why stainless steel?

Grain is a food and animal feed. Stainless steel can be cleaned without leaving residues, and no rust particles get into the product.

Do I need to remove the auger for road travel?

No, it folds mechanically. It folds against the vehicle for road travel, keeping within the permitted transport dimensions.

How is the height adjusted?

Using a cable winch. It operates independently of the vehicle hydraulics and holds its position without pressure.

How long is the auger?

4.000 mm, with a diameter of 154 mm.

Is a control unit included?

Yes, a control unit for switching the auger on and off is included in the delivery.