Fliegl suction funnel with frame and three-point mount – suction funnel with frame / compact for docking device, size 8"
€477.00
Scope of delivery
- 1 × Fliegl suction funnel Compact with frame and three-point linkage mounting, 8″
- Version: V-part (Italian system), galvanised
Note: This product is the suction funnel with support frame and three-point linkage mounting. The docking unit itself (slide valve, hydraulics, controls) is not included and must be ordered separately.
Technical data
| Model | Suction funnel with frame / Compact |
|---|---|
| Manufacturer | Fliegl Agrartechnik GmbH |
| Product type | Suction funnel for slurry docking unit |
| Nominal diameter | 8″ (approx. 200 mm) |
| Coupling system | V-part – Italian system |
| Mounting | Three-point linkage mounting |
| Surface finish | Hot-dip galvanised |
| Net weight | 47 kg |
|---|
Product description
What is a suction funnel – and what is it used for?
A suction funnel is the connecting piece between the slurry pit (or a storage tank) and the suction hose of the slurry tanker. It is fitted to the docking unit above the pit and forms the funnel-shaped inlet into which the suction arm or hose of the vacuum tanker is inserted.
Filling process:
- The slurry tanker drives up to the docking station.
- The suction arm is lowered or pushed into the suction funnel.
- The slurry slide valve only opens once the arm is seated in the funnel – a safety interlock prevents it from opening unless the arm is docked.
- The tanker's vacuum pump draws the slurry through the funnel into the tanker.
- Once filling is complete, the arm is raised and the slide valve closes automatically.
The frame with three-point linkage mounting – why a mobile option can be better
A suction funnel without a frame is permanently fitted to the docking unit and stays there. The suction funnel with frame and three-point linkage mounting is a mobile solution: the frame is attached to the tractor's three-point linkage, transported to the work site and positioned over the pit or tank.
This is useful when:
- There are several pits or tanks on the farm and one suction funnel is sufficient
- The funnel needs to be stored under cover between filling operations (e.g. in a shed)
- The docking station is not permanently located in one place (e.g. with field-edge containers or changing storage locations)
Compact vs Standard – the difference
| Feature | Standard (GFZXXX800124) | Compact (GFZXXX800126) |
|---|---|---|
| Nominal diameter | 8″ | 8″ |
| Coupling system | V-part, Italian system | V-part, Italian system |
| Mounting | Three-point linkage mounting | Three-point linkage mounting |
| Surface finish | Galvanised | Galvanised |
| Weight | approx. 90 kg | 47 kg |
At 47 kg, the Compact version weighs just under half as much as the standard version (approx. 90 kg). This reduces the load on the three-point linkage and makes it possible to transport it with smaller tractors. The manufacturer has not documented the exact design differences (frame height, adjustment range, material thickness) – ask your supplier whether the Compact version is suitable for your pit height and docking station.
V-part and M-part – which one do you need?
The Italian-style coupling system uses two coupling halves:
- V-part (male part) – the spigot that is inserted into the mating coupling
- M-part (female part) – the socket that receives the spigot
This item is the V-part. Which part you need depends on which coupling half your slurry tanker and docking unit have. Rule of thumb: The suction funnel must be the counterpart to the tanker's suction arm – if the arm has a V-part, the funnel needs an M-part, and vice versa.
If in doubt, check the coupling half on your slurry tanker or ask the tanker manufacturer.
8″ nominal diameter – the standard size
The nominal diameter of 8 inches (approx. 200 mm) is the most common size in slurry technology. Most vacuum tankers in the 5,000 to 20,000-litre class use 8″ suction hoses. Smaller tankers or older systems sometimes use 6″, while larger transport tankers and separation systems use 10″ or 12″.
Important: The nominal diameter of the suction funnel must match the nominal diameter of the suction hose on the slurry tanker and the connection on the docking unit/pit. All three components must have the same nominal diameter.
Galvanised – why it is essential for slurry equipment
Slurry is highly corrosive – the combination of moisture, ammonia, hydrogen sulphide and organic acids attacks untreated steel within a few months. A galvanised suction funnel withstands this exposure for much longer than a painted version. Splashing, mud and the mechanical stresses of docking and undocking also put the surface to the test.
Who it is designed for
The Compact suction funnel is designed for farmers, agricultural contractors and biogas plant operators who:
- Fill vacuum tankers via docking stations at slurry pits or pre-storage tanks
- Need a mobile, lightweight solution that can be transported by tractor between several filling points
- Have a tractor with front or rear three-point linkage
- Use tanker connections in the 8″ Italian-style system
Frequently asked questions
Will the suction funnel fit my slurry tanker?
The suction funnel must match your tanker in three respects: the same nominal diameter (8″ here), a compatible coupling system (V-part, Italian system here) and the correct coupling half (the counterpart to the suction arm). Check these three points on your tanker before ordering.
What is the difference between a V-part and an M-part?
The V-part (male part) is the spigot that is inserted into the mating coupling. The M-part (female part) is the socket that receives the spigot. Which part you need depends on the coupling half on your slurry tanker – the funnel must be the counterpart to the tanker's connection.
Do I also need a docking unit?
Yes. This item is only the suction funnel with support frame. The docking unit (slurry slide valve, hydraulics and controls, if required) is a separate product. If no docking unit is installed at your pit, you will need to order one separately and have it fitted.
Why choose the Compact version instead of the standard version?
At 47 kg, the Compact version weighs about half as much as the standard version (approx. 90 kg). This makes it easier to handle and allows it to be used with smaller tractors with lower lifting capacity on the three-point linkage. It is best to check directly with your supplier whether the Compact version is suitable for your pit height and docking station.
Can I also use the suction funnel freestanding without a tractor?
The frame has a three-point linkage mounting and is designed to be transported and positioned by tractor. Whether it can also be used freestanding (e.g. on a concrete plinth beside the pit) depends on the frame design – ask the manufacturer.
| Gerätetyp : | Gülletechnik |
|---|