Fliegl rotator adapter »Mono«, Euronorm; rotates 180° in both directions; heavy-duty ball-bearing slewing ring; incl. hydraulic couplings and hoses
€3,050.00
Features
- Heavy-duty ball-bearing slewing ring
- Euro-Norm mounting
- Hydraulic connectors and hoses
- Painted finish
Technical data
| Manufacturer | FLIEGL |
|---|---|
| Product type | Rotating adapter for attachments |
| Mounting | Euro-Norm |
| Rotation range | 180° in both directions |
| Bearing | Heavy-duty ball-bearing slewing ring |
| Load capacity | approx. 1,500 kg |
| Unladen weight | approx. 375 kg |
| Connections required | 1 × double-acting |
| Surface finish | painted |
Product description
Rotating adapter with ball-bearing slewing ring
The adapter fits between the loader and attachment, allowing attachments with hydraulic connections to rotate 180° in either direction. It is compatible with all attachments with a Euro-Norm mounting.
What a rotating adapter is used for
A front loader moves along two axes: lifting and tilting. It cannot rotate – the whole vehicle has to be manoeuvred for that.
What the adapter changes:
- Side unloading – into a trailer beside the vehicle, without having to drive up to it.
- Working alongside a wall – rotate the attachment instead of manoeuvring the vehicle into position.
- Narrow livestock passages – where there is no room to turn.
- Precise positioning – for example, when setting down loads.
- Slopes and ditches – the attachment follows the contours of the ground.
The real benefit is the time saved: Every manoeuvre takes time. Over a hundred work cycles a day, this adds up considerably – and on a confined yard, manoeuvring is often impossible.
180° in both directions
The rotation range therefore covers a full half-circle to the left and to the right.
What this means in practice: The attachment can be turned completely around – so it can also be positioned facing backwards.
Why limiting rotation to 180° in each direction makes sense: On hydraulically operated attachments, hoses run through the rotation range. Unlimited rotation would wind them up and tear them off – the limit protects the hoses.
This is more than enough in practice: Anything that cannot be reached by rotating to the left can be reached by rotating to the right.
The ball-bearing slewing ring
This is the component that determines the quality.
The forces acting on it:
- The weight of the attachment and load – up to 1,500 kg.
- The tilting moment – the load hangs in front of the slewing ring, not above it.
- Impacts when penetrating material and setting down loads.
- Torsion, when the attachment grips on one side.
Why use a ball bearing rather than a plain bearing: A plain bearing under constant load and exposed to dirt becomes stiff and develops play. A ball-bearing slewing ring distributes the load across many rolling elements – it rotates easily and withstands both axial and radial forces.
The key issue when it comes to wear: A worn slewing ring develops play – the attachment wobbles and the load is distributed unevenly. This causes wear to increase further.
Working out the weight – the most important point before buying
| Adapter unladen weight | approx. 375 kg |
|---|---|
| Permissible load capacity | approx. 1,500 kg |
| Total load on the loader | up to approx. 1,875 kg |
Why this is the key figure to check: The adapter's 375 kg reduces the loader's payload – before an attachment has even been fitted.
A worked example using a silage grab bucket:
| Rotating adapter | 375 kg |
|---|---|
| 1.01 m³ grab bucket | 590 kg |
| Silage | around 700 kg |
| Total | around 1,665 kg |
What this means: The loader's rated tipping load must be sufficient to handle this load at working height. Stability is at its lowest when loading overhead – and that is precisely when the rotating adapter is needed.
The second effect: The adapter adds to the overall length. The attachment sits further forward – increasing the leverage and reducing the tipping load.
One double-acting connection for rotation
Rotation is hydraulically operated.
What to bear in mind: This connection is for the rotating adapter. A hydraulically operated attachment needs an additional connection – for example, a grab bucket or mixer.
Check before ordering: How many auxiliary circuits does the loader have? With only one circuit, you can either rotate or grip – not both.
Hydraulic connectors and hoses are included in the scope of delivery.
Euro-Norm mounting on both sides
The adapter is compatible with all attachments with a Euro-Norm mounting.
What this means: Euro-Norm is the most widely used system for agricultural front loaders. Your existing range of attachments can continue to be used – buckets, grabs, pallet forks and bale clamps.
The adapter fits in between: Loader → rotating adapter → attachment. Both connections are Euro-Norm, so attachments are changed in the usual way.
Painted finish
The adapter is painted.
What this means for use: This is sufficient for earthmoving, bulk materials and general materials handling.
Where a galvanised finish would be better: for constant contact with silage, slurry or manure. Silage effluent is acidic and attacks the paint where it is scratched – and scratches are inevitable when changing attachments.
A practical tip: The mounting surfaces should be cleaned regularly. The paint will wear off there anyway, and corrosion on the locking mechanisms is a safety issue.
Typical applications
| Attachment | Benefits of rotation |
|---|---|
| Bucket | side unloading without manoeuvring |
| Silage grab bucket | fill the mixer wagon from any position |
| Pallet fork | positioning in narrow passages and racking |
| Bale clamp | set down in any orientation |
| Push-off blade | clear in both directions without turning |
Applications
Farms, dairy and beef cattle operations, agricultural contractors, biogas plants, landscaping and grounds maintenance, construction companies, local authorities and depots, storage and logistics areas, equipment hire.
Operating instructions
- Check the loader's rated tipping load – the adapter, attachment and load can add up to around 1,875 kg.
- Allow for the increased leverage – the adapter adds to the overall length and reduces the tipping load.
- Do not exceed the 1,500 kg load capacity.
- Check the number of auxiliary circuits – one circuit for rotation, plus another for hydraulically operated attachments.
- After each change, check that the adapter and attachment are fully locked in place.
- Do not exceed the 180° rotation range in either direction – otherwise the hoses will be strained.
- Make sure there is enough clearance when rotating, especially in sheds and between vehicles.
- Do not drive with the attachment rotated if visibility is impaired.
- Do not enter the rotation area or stand beneath the raised attachment.
- Depressurise the hydraulics before maintenance and secure the attachment against accidental lowering.
- Lubricate the slewing ring as specified by the manufacturer and check regularly for play.
- Check hydraulic hoses for chafing – they move with every rotation.
- Clean after use when working with silage, slurry or manure.
Frequently asked questions
How far does the adapter rotate?
180° in both directions. This allows the attachment to be turned completely around. The limit protects the hydraulic hoses on attached equipment from winding up.
How much can I lift with it?
The load capacity is around 1,500 kg. The adapter itself weighs 375 kg, bringing the total load on the loader to up to around 1,875 kg.
How many hydraulic connections do I need?
One double-acting connection for rotation. Hydraulically operated attachments need an additional connection – for example, for a grab bucket.
Is the adapter compatible with my attachments?
It is designed for all attachments with a Euro-Norm mounting. The adapter fits between the loader and attachment.
Why use a ball-bearing slewing ring?
It distributes the load across many rolling elements, rotates easily and withstands both axial and radial forces. A plain bearing under load and exposed to dirt becomes stiff and develops play.
Does the adapter reduce the payload?
Yes, in two ways: its 375 kg unladen weight reduces the load capacity, and the adapter positions the attachment further forward, increasing the leverage and further reducing the tipping load.
Are the hoses and connectors included?
Yes, hydraulic connectors and hoses are included in the scope of delivery.
Is the painted finish suitable for silage?
Yes, for occasional use. For constant contact with silage, slurry or manure, a galvanised finish is the better choice – silage effluent is acidic and attacks the paint where it is scratched.
| Gerätetyp : | Dreh- und Schiebegeräte |
|---|