Fliegl rear bucket »Mechanisch Gigant«, 2000 mm, External width 2090 mm; Volume approx. 1.10 m³
€1,475.00
Scope of delivery
- 1 × Fliegl rear bucket “Gigant”, mechanical, 2,000 mm working width, galvanised
- 1 × Category II three-point linkage mount (fitted)
- 1 × Cable for releasing the folding wall
Note: The bolt-on scraper edge is not included in the scope of delivery and is available separately as an optional accessory.
Technical data
| Manufacturer | Fliegl Agro-Center GmbH |
|---|---|
| Product type | Rear bucket (mechanical) |
| Series | “Gigant” |
| Operation | Mechanical – folding wall with ratchet mechanism operated by cable |
| Mounting | Category II three-point linkage |
| Surface finish | Galvanised |
| Working width | 2,000 mm |
|---|---|
| Overall width | 2,090 mm |
| Depth | 1,040 mm |
| Front wall height | 500 mm |
| Folding wall height | 370 mm |
| Volume | approx. 1.10 m³ |
| Unladen weight | approx. 280 kg |
| Length (transport dimensions) | 1,400 mm |
|---|---|
| Width (transport dimensions) | 2,090 mm |
| Height (transport dimensions) | 890 mm |
| Front sides | Additionally reinforced |
|---|---|
| Scraper edge | Optional – bolt-on scraper edge available as an accessory |
Product description
Mechanical rear bucket for three-point linkage – no hydraulics, no hoses
The Fliegl rear bucket “Gigant” in the mechanical version is fitted to the Category II three-point linkage and does not require a hydraulic connection. The folding wall is released from the driver’s seat using a ratchet mechanism operated by a cable – drive the tractor forward, pull the cable, the folding wall swings backwards and the load slides out.
This makes the bucket the simplest and most reliable solution for transporting bulk materials at the rear: no hoses, no couplings, no hydraulic oil and no leaking connections.
1.10 m³ capacity – what can it hold?
| Material | Approx. bulk density | Approx. payload |
|---|---|---|
| Sand / gravel | 1,500–1,800 kg/m³ | 1,650–1,980 kg |
| Soil / topsoil | 1,200–1,500 kg/m³ | 1,320–1,650 kg |
| Manure / farmyard manure | 700–900 kg/m³ | 770–990 kg |
| Wood chips | 250–350 kg/m³ | 275–385 kg |
| Grain (wheat, barley) | 700–800 kg/m³ | 770–880 kg |
Important: The payload must be within the tractor’s rear lifting capacity. With heavy bulk materials such as sand or gravel, the bucket should not be filled completely – the lifting capacity of the linkage is almost always the limiting factor, not the volume.
Galvanised – corrosion protection with no further treatment
The entire bucket is galvanised. Unlike paint, this means:
- No repainting: Scratches and scuff marks expose zinc, not bare iron
- Cathodic protection: The zinc corrodes sacrificially, protecting the iron underneath even where the surface is damaged
- Long-lasting outdoors: Ideal for buckets constantly exposed to moisture, manure and silage juice
Folding wall with cable release – how it works
The folding wall (370 mm high) is hinged at the rear of the bucket and held closed by a ratchet mechanism. To unload:
- Drive the tractor with the rear bucket to the unloading point
- Pull the cable from the driver’s seat – the catch releases
- Raise the linkage – the folding wall opens backwards under the weight of the load
- The load slides out backwards
The advantage over the hydraulic version: No hoses, no spool valves and no maintenance to the hydraulic system. The disadvantage: the folding wall cannot be opened gradually – it is either fully released or not released at all.
500 mm front wall – why is it higher than the folding wall?
The front wall, at 500 mm, is considerably higher than the folding wall (370 mm). This is intentional:
- The higher front wall prevents the load from falling over the front edge onto the tractor while travelling
- The lower folding wall makes it easier to fill the bucket from above with a front loader
- The reinforced front sides withstand the forces involved in loading and braking
Scraper edge – optional, but recommended
The bolt-on scraper edge is available as an optional accessory and is bolted to the lower edge of the bucket. It protects the bucket floor when scraping over hard surfaces and can be replaced as a wear part. Recommendation: If you regularly use the bucket on concrete or paving, order the scraper edge as well.
Who it is designed for
- Farms: Transport manure, soil, sand and bulk materials at the rear – the front loader loads from the front, while the rear bucket transports the load
- Local authorities: Take grit, chippings, leaves and green waste to the collection point
- Equestrian centres and horse owners: Transport paddock manure, riding arena sand and shavings
- Tractors without a spare rear spool valve: The mechanical version does not require a hydraulic connection
- Businesses that value simplicity: No hoses, no couplings, no hydraulic oil – fit it and get going
Mechanical vs hydraulic – which version is right for you?
| Feature | Mechanical (this version) | Hydraulic |
|---|---|---|
| Folding wall operation | Cable / ratchet mechanism | Hydraulic cylinder |
| Hydraulic connection | Not required | 1 × double-acting |
| Gradual opening | No – fully open or closed | Yes – infinitely adjustable |
| Folding wall maintenance | Minimal – lubricate the cable | Cylinder, hoses, seals |
| Price | Lower | Higher |
| Ideal for | Simple transport, unloading at one point | Controlled spreading, frequent partial unloading |
What the rear bucket does not have – and why
- No hydraulics: This is the defining feature of the mechanical version – deliberately kept simple. If you need gradual opening, choose the hydraulic version.
- No scraper edge supplied as standard: Available as an option. If you only use the bucket for transport (not scraping), you do not need one.
- No high-tip mechanism: The bucket does not tip above its normal height. A high-tip bucket version is available for unloading at height.
Frequently asked questions
Which tractors is the rear bucket compatible with?
All tractors with a Category II three-point linkage. These are generally tractors from around 50 hp. Rear lifting capacity should be at least 1,500 kg, as the bucket (280 kg) plus its load can quickly exceed 1,000 kg.
Can I also use the bucket for scraping?
In principle, yes, but the scraper edge is not included in the scope of delivery. Without a scraper edge, the bucket floor will wear more quickly when scraping on concrete or paving. The bolt-on scraper edge is available as an optional accessory and protects the floor.
What is the difference compared with the hydraulic Gigant rear bucket?
The mechanical version releases the folding wall by cable – fully open or closed. The hydraulic version opens the folding wall continuously using a hydraulic cylinder, allowing controlled unloading. The mechanical version is cheaper and does not require a spool valve.
How much weight can I load into the bucket?
The volume (1.10 m³) and unladen weight (280 kg) are one part of the equation. The limiting factor is the tractor’s rear lifting capacity. When carrying sand or gravel (1,500–1,800 kg/m³), only fill the bucket partially. With light materials such as wood chips, the volume is the limiting factor.
Can the rear bucket also be fitted to Category I?
The bucket is designed for Category II three-point linkage. Tractors with Category I linkage (e.g. compact tractors) require reducing bushes to adapt the pin diameter from 28.6 mm (Category II) to 22.4 mm (Category I). Please check that the lifting capacity of the Category I linkage is sufficient for the 280 kg bucket plus its load.
| Gerätetyp : | Schaufel |
|---|---|
| Working width: | 2.00m |
| volume: | 1100L |