Fliegl pallet fork »Schwerlast«, 1500 mm, Frame width 1500 mm; Tine length 1200 mm; Tine cross-section 100 x 50 mm; Load capacity at 500 mm load centre 3.5 t; Mount FEM 3A (476 mm) (Mounting on Euronorm)
€1,050.00
Scope of delivery
- 1 × Fliegl heavy-duty forklift fork with Euro mounting
- 2 × fork tines, length 1200 mm, cross-section 100 × 50 mm (please confirm whether the tines are included in the scope of delivery)
Technical data
| Manufacturer | Fliegl Agrartechnik GmbH |
|---|---|
| Model | Heavy-duty forklift fork |
| Equipment type | Heavy-duty fork carriage for front loaders |
| Frame width | 1500 mm |
|---|---|
| Fork tine mounting standard | FEM 3A (476 mm hook spacing) |
| Mounting on carrier vehicle | Euro mounting (Euronorm) |
| Tine length | 1200 mm |
|---|---|
| Tine cross-section | 100 × 50 mm (width × height) |
| Tine suspension | FEM 3A – height-adjustable on the fork carriage |
| Lifting capacity | 3.500 kg (3,5 t) |
|---|---|
| Load centre distance (LSP) | 500 mm |
Product description
Who this forklift fork is designed for
The Fliegl heavy-duty forklift fork is a fork carriage for front loaders, wheel loaders and telescopic handlers with Euro mounting. With a 3.5 t load capacity at a 500 mm load centre distance, it is well above light pallet forks (1.0–2.5 t) and is designed for jobs where standard forks reach their limits:
- Precast concrete elements, stone packs, paving packs: A pack of concrete blocks (1.0 × 1.0 m) weighs 1,500–2,500 kg – too much for a light fork to handle safely.
- Heavy round bales: Baled round bales of maize silage or hay weigh up to 1,200 kg each. Two bales side by side = 2,400 kg.
- Big bags: Filled big bags (fertiliser, seed, bulk materials) weigh 500–2,000 kg.
- Machine parts, counterweights, containers: Anything weighing more than 2 t that is lifted with forks.
FEM 3A – what the tine suspension means
The tines are mounted on the fork carriage in accordance with FEM 3A (Fédération Européenne de la Manutention, Class 3A). FEM 3A defines:
| FEM class | Hook spacing | Typical load capacity | Typical application |
|---|---|---|---|
| FEM 2A | 406 mm | 1.0–2.5 t | Light forklifts, compact loaders |
| FEM 3A | 476 mm | 2.5–5.0 t | Medium to heavy forklifts, front loaders, telescopic handlers |
| FEM 4A | 559 mm | 5.0–10.0 t | Heavy forklifts, large wheel loaders |
Practical significance: Any fork tine with FEM 3A suspension (476 mm hook spacing) fits this fork carriage, regardless of the tine manufacturer. FEM 2A tines are too narrow, while FEM 4A tines are too wide. If you need longer or shorter tines later, simply replace the tines and keep the fork carriage.
Euro mounting – attachment to the front loader
The fork carriage is attached to the front loader using a Euro mounting (Euronorm). Euro is the most widely used front-loader attachment standard in Europe – used by Stoll, Alö/Quicke, MX, Hauer, Schäffer and most OEM loaders.
Check before buying:
- Does your front loader have a Euro mounting? The fork carriage will not fit without an adapter if your loader has a skid-steer mounting, Stoll special mounting or a manufacturer-specific system.
- Is the lifting capacity of your front loader sufficient? A fork capacity of 3.5 t is no use if the front loader can only lift 2 t. The capacity is the maximum for the fork, not the loader.
- Is the stability of the tractor adequate? With 3.5 t on the front loader, the tractor needs sufficient kerb weight and, if necessary, rear ballast to prevent it tipping forwards.
1200 mm tines, 100 × 50 mm – why this size
The tines are 1200 mm long with a cross-section of 100 mm wide × 50 mm high. This profile is stronger than common lightweight tines (80 × 40 mm or 100 × 40 mm) and is sized for the 3.5 t load capacity:
| Tine cross-section | Typical load capacity | Application |
|---|---|---|
| 80 × 40 mm | 1.0–1.5 t | Light pallet forks, compact tractors |
| 100 × 40 mm | 1.5–2.5 t | Standard pallet forks, front loaders |
| 100 × 50 mm | 2.5–3.5 t | Heavy-duty pallet forks, front loaders, telescopic handlers |
| 120 × 50 mm | 3.5–5.0 t | Heavy wheel loaders, industrial use |
| 150 × 60 mm | 5.0–10.0 t | Large wheel loaders, port handling |
A tine length of 1200 mm is suitable for Euro pallets (1200 × 800 mm) and most industrial pallets. For longer loads, FEM 3A tines in other lengths (1500 mm, 1800 mm, 2000 mm) can be fitted later.
3.5 t at LSP 500 mm – what load centre distance means
The load capacity of 3.500 kg applies at a load centre distance (LSP) of 500 mm. This means the centre of gravity of the load is 500 mm from the back of the tines (fork carriage).
When the LSP is 500 mm:
- A Euro pallet (1200 mm deep) is picked up flush against the fork carriage → load centre at approx. 600 mm → LSP exceeded
- A half pallet (600 mm deep) is picked up flush against the fork carriage → load centre at approx. 300 mm → LSP not exceeded, full 3.5 t capacity available
Rule of thumb: With a uniformly loaded Euro pallet, the load centre is approx. 600 mm. In this case, the permitted load capacity falls below 3.5 t. The exact residual capacity depends on the front loader and tractor – check your front loader's load capacity chart.
What the Fliegl heavy-duty forklift fork does not have – and when that matters
- No hydraulic side shift: The tines are moved manually along the FEM 3A carriage and secured with pins. There is no hydraulic adjustment for precise positioning in narrow warehouse aisles. This is not a disadvantage for agricultural use (farm loading, field logistics) – manual adjustment is sufficient.
- No weighing system: Unlike forklift weighing forks, the fork carriage has no integrated scales. If you need to know the weight while loading (e.g. for feeding equipment or goods for sale), you will need a separate weighing system.
- No rotator: The fork cannot be rotated or tilted hydraulically. A separate rotator or tipping bucket is required to empty big bags or tip containers.
Frequently asked questions
Will the heavy-duty forklift fork fit my front loader?
If your front loader has a Euro mounting (Euronorm), the fork carriage will fit directly. Euro is the most common front-loader standard in Europe. Other mounting systems (skid steer, manufacturer-specific) require an adapter or the fork carriage will not fit. Also check: Your front loader must have sufficient lifting capacity for the load plus the weight of the fork carriage.
What does FEM 3A mean?
FEM 3A is a European standard for fork tine suspensions with 476 mm hook spacing. Any fork tine with a FEM 3A profile fits this fork carriage, regardless of the manufacturer. FEM 3A covers load capacities of approx. 2.5 to 5.0 t and is the standard for medium to heavy forklifts, front loaders and telescopic handlers.
Can I fit longer or shorter tines later?
Yes. The fork carriage accepts all FEM 3A tines. The supplied tines (1200 mm, 100 × 50 mm) can be replaced with longer (e.g. 1500 mm, 1800 mm) or shorter tines, provided the tine cross-section is suitable for the load capacity. Please note: longer tines move the load centre forwards and reduce the residual capacity.
Is my tractor powerful enough for 3.5 t on the front-loader fork?
The 3.5 t is the capacity of the fork, not the front loader or tractor. Your tractor must have sufficient kerb weight and rear ballast to carry the load safely without tipping forwards. Check the lifting capacity and stability specifications of your front loader. For 3.5 t on the fork, you will generally need a tractor from approx. 150 PS with a suitable front loader (e.g. Stoll, MX or an OEM loader in the 4 t class).
What does LSP 500 mm mean?
LSP stands for load centre distance – the distance from the fork carriage to the centre of gravity of the load. The stated load capacity (3.5 t) applies only if the load centre is no more than 500 mm from the fork carriage. At a greater distance (e.g. with deep pallets or an unevenly distributed load), the permitted load capacity is reduced.
| Gerätetyp : | Palettengabel |
|---|