Skip to main content Skip to search Skip to main navigation
Menu

Fliegl municipal blade »Duplex«, Cat. municipal, 1600 mm, blade height 570 mm

Description

Scope of delivery

  • 1 × snow plough blade with two independently pivoting wings, working width 1600 mm
  • Municipal mounting plate, height-adjustable headstock
  • Polyurethane scraper blades, 130 × 20 mm
  • Spring-loaded overload protection
  • Support wheels
  • Marker lights
  • Hydraulic control valve for all functions

Not included: Hydraulic hoses and couplings for the vehicle, and the connection cable for the marker lights. Required on the vehicle: one double-acting hydraulic connection.

Technical data

ManufacturerFliegl
Product typeSnow and levelling blade
Working width1.600 mm
Blade height570 mm
Weight150 kg
MountingMunicipal mounting plate
Headstockheight-adjustable
Anglingboth wings independently by 20° each
Working positionsAngled, plough and V positions
Operationhydraulic, one control valve for all functions
Hydraulic requirementone double-acting connection
Scraper bladesPolyurethane, 130 mm high, 20 mm thick
Overload protectionspring-loaded
Support wheelsstandard
Marker lightsstandard
Paint finishRAL 2011 deep orange

Product description

A snow plough blade with a working width of 1.60 metres, with two halves that can be angled hydraulically and independently. This gives you three working positions instead of one – and that is exactly what sets this blade apart from a simple snow pusher.

Three positions, three jobs

Both wings pivot independently by 20 degrees each. This gives you three basic positions:

PositionUse
Angled positionBoth wings point in the same direction – the standard position. The material being cleared is pushed to one side, for example to the edge of a road or yard.
Plough positionThe wings form a roof shape that opens forwards. The material being cleared is split to both sides – ideal for the first quick pass over wide areas, without leaving everything piled up on one side.
V positionThe wings form a wedge pointing forwards. All the pushing force is concentrated at the tip – making it possible to break through compacted snow and deep drifts that a straight blade would simply push ahead. Also useful for pushing material into piles.

The practical benefit: Change position from the driver’s seat while working. Break through the drift in V position first, then clear neatly in the angled position – without getting out or changing the attachment.

Just one double-acting connection – and that matters more than you might think

A blade with two independently moving wings would normally need several hydraulic circuits. Here, one control valve operates all functions, and the vehicle only needs to provide one double-acting connection.

Why this can make all the difference: Compact tractors, tool carriers and yard loaders often have only one or two control valves at the front – and these are often already in use. An attachment requiring three circuits is ruled out before you even get to the price.

What 1,600 mm really means when clearing snow

It is worth doing this calculation before you buy.

At an angle, a 1,600 mm-wide blade does not clear 1,600 mm. At an angle of 20 degrees, the actual clearing width is around 1,500 mm – purely for geometric reasons, because the blade is angled to the direction of travel. In V or plough position, it is narrower still.

What this means: The working width should suit the vehicle’s track width and the area to be cleared. If you want to clear a 1.60 m-wide driveway in one pass, you need a wider blade – otherwise a strip will be left behind on every pass. Conversely, the blade must be wide enough for the vehicle’s wheels to run in the cleared track without compacting the snow.

Polyurethane scraper blades – the cost-effective middle ground

The scraper blades are made of polyurethane and measure 130 mm high by 20 mm thick. Choosing the material is the decision with the greatest consequences when buying a snow plough blade:

SteelRubberPolyurethane
Clearing performancevery goodmoderategood
Service lifemediumshortlong
Noiseloudquietquiet
Surface protectionlowhighhigh

Why this matters on municipal surfaces: A steel blade clears most cleanly, but it also catches paving joints, lawn edging, manhole covers and road markings. On block paving, in residential areas and on yard driveways, this can be an expensive side effect. Rubber is gentler, but wears out quickly. Polyurethane lasts considerably longer than rubber and is just as gentle on the surface – with a thickness of 20 mm providing a good wear reserve.

Noise is another consideration: winter maintenance often starts before six in the morning. A steel blade on tarmac is clearly audible in a residential area; a PU blade is not.

Overload protection, support wheels and height-adjustable headstock

The spring-loaded overload protection allows the blade to give way when it hits a solid obstacle – a manhole cover, the edge of paving or a kerb hidden under snow. Without it, the blade or mounting plate may bend, and in the worst case the vehicle may stop abruptly. This is no theoretical risk during winter maintenance: you cannot see edges beneath an unbroken blanket of snow.

The support wheels keep the scraper blade at a set distance from the ground. This considerably extends the service life of the blades and prevents the blade from digging into the surface. They are included as standard – many competitors offer them as an accessory.

The height-adjustable headstock compensates for different mounting heights on carrier vehicles, so the scraper blade sits flat and evenly across its full width. A blade that sits at an angle wears unevenly and clears poorly.

Marker lights and road use

Marker lights are included as standard. This is not a comfort feature; for a 1.60 m-wide attachment, it is generally a requirement for use on public roads – particularly when angled, as one side of the blade then extends well beyond the vehicle’s outline.

Before using the blade on the road, please check the requirements for your vehicle – marking, lighting, permitted width, front axle load and vehicle approval. The RAL 2011 deep orange paint finish is the usual warning colour for municipal equipment.

More than just winter maintenance

A snow plough blade of this type can work all year round: pushing leaves into piles, clearing sand and grit after winter, gathering silage and feed residues at the clamp, pushing manure and bedding around the yard, levelling bulk materials and grading tracks. The PU blades are an advantage on hard surfaces because they do not dig in or scratch. The V position is suitable for pushing material into piles, while the plough position is useful for spreading it.

Operating notes

  • Check that the vehicle mounting is compatible before purchase – this blade has a municipal mounting plate. Three-point front linkage in Cat. 0 or Cat. 1 requires a different version.
  • Check the front axle load and permitted gross weight; the 150 kg load is positioned well ahead of the front axle. Add rear ballast if necessary.
  • Check the scraper blades regularly for wear and turn or replace them in good time.
  • Adjust the support wheels so that the blade touches the surface without pressing down on it.
  • When travelling on public roads, connect the lights and observe the marking requirements.
  • Clean hydraulic connections before coupling; dirt is the most common cause of valve faults.
  • After the season, clean the blade, store it in a dry place and grease the pivot points.

Frequently asked questions

Will the blade fit my vehicle?

This version has a municipal mounting plate. The same blade is available as separate items in Cat. 0 and Cat. 1 versions for vehicles with three-point front linkage. Please check your vehicle’s mounting before ordering – we will be happy to advise you.

What does the description with two wings mean?

Both halves of the blade can be angled hydraulically and independently by 20 degrees each. This gives you three working positions: angled to push material to one side, plough to split it to both sides, and V position to break through compacted or drifted snow.

How many hydraulic connections do I need?

One double-acting connection. A control valve operates all functions – particularly useful for compact tractors and tool carriers, which often have only one or two control valves at the front.

What is the blade’s actual clearing width?

In the straight position, 1,600 mm. At an angle of 20 degrees, the actual clearing width is around 1,500 mm; in V and plough positions it is correspondingly less. Bear this in mind when choosing the working width – the blade needs to clear wider than the vehicle’s track width.

Why choose polyurethane instead of steel or rubber?

Polyurethane lasts considerably longer than rubber and is just as gentle on the surface. A steel blade clears most cleanly, but it also catches paving joints, lawn edging and manhole covers, and is considerably louder – an important consideration during early-morning winter maintenance. The blades are 130 mm high and 20 mm thick, providing a good wear reserve.

What happens if I hit an obstacle?

Spring-loaded overload protection allows the blade to give way, protecting the blade, mounting plate and vehicle. Manhole covers and kerbs are hidden beneath an unbroken blanket of snow, so this protection is not an optional extra but essential equipment.

Are the lights and support wheels included?

Yes, marker lights and support wheels are included as standard. Before using the blade on public roads, please check the requirements for your vehicle regarding marking, lighting and permitted width.

Can I use the blade outside winter?

Yes. It is suitable for pushing leaves, sand and grit into piles, clearing silage and feed residues at the clamp, pushing manure and bedding around the yard, levelling bulk materials and grading tracks. The polyurethane blades do not dig into hard surfaces.

How heavy is the blade?

150 kg. Please note that this weight acts well ahead of the front axle – check your vehicle’s front axle load and permitted gross weight, and add rear ballast if necessary.

Properties
Gerätetyp : Schiebe- und Räumschild
Working width: 1.60m