Skip to main content Skip to search Skip to main navigation
Menu

Fliegl manure and silage grab bucket »Small«, 1050 mm, 2 cylinders; Volume approx. 0.41 m³; Opening width max. 1000 mm

Description

Scope of delivery

  • 1 × Fliegl manure and silage grab bucket „Small“, 1050 mm wide, Euro mounting
  • 1 × hydraulic hoses and connectors

Note: A double-acting hydraulic connection on the front loader is required for operation.

Technical data

ManufacturerFliegl Agro-Center GmbH
Product typeManure and silage grab bucket
Series„Small“
MountingEuro standard (front loader)
Dimensions and weight
Working width1.050 mm
Volumeapprox. 0,41 m³
Opening widthmax. 1.000 mm
Unladen weightapprox. 280 kg (Euro mounting)
Hydraulics and drive
Number of hydraulic cylinders2
Hydraulic connection1 × double-acting
Hydraulic hoses and connectorsIncluded in the scope of delivery
Wear protection
Scraper barHigh-strength wear-resistant steel, HB 500
Back and baseReinforced design

Product description

Grab bucket for everyday use in the livestock building

The Fliegl manure and silage grab bucket „Small“ is a two-cylinder grab bucket with a working width of 1.050 mm for front loaders with Euro mounting. With a volume of approx. 0,41 m³ and an opening width of up to 1.000 mm, it holds enough material to collect and move manure, silage and dung efficiently – even in narrow passageways and low livestock buildings.

The „Small“ in the name refers to the series, not its performance. The series is designed for compact tractors and smaller front loaders, where a narrower bucket offers a better balance between unladen weight and payload.

Two-cylinder design – why two cylinders make a difference

The grab bucket operates with two hydraulic cylinders, which control the grab via a double-acting hydraulic connection. Compared with single-cylinder designs, two cylinders offer:

  • Even closing pressure: The grab closes evenly across its full width, so less material falls out at the sides
  • Better force distribution: The leverage forces are distributed across two mounting points instead of one
  • Greater gripping force: Two cylinders generate more closing force than a single cylinder of the same diameter

Opening width of 1.000 mm – what this means in practice

The maximum opening width of 1.000 mm is almost equal to the full working width (1.050 mm). This means the bucket opens almost completely, offering several advantages:

  • Large silage blocks: Even compacted silage can be picked up in a single pass
  • Removing manure packs: The wide gripping angle reliably handles loose, fibrous materials too
  • Versatile use: Round bales (up to approx. ∅ 1.000 mm), straw, hay and green waste

Scraper bar made from HB 500 wear-resistant steel – tough on hard ground

The scraper bar made from high-strength wear-resistant steel with a hardness of HB 500 is the contact surface with the ground. HB 500 means 500 Brinell – that is about three times as hard as ordinary structural steel (S235 at approx. 160 HB). In practice, this means:

  • Significantly longer service life when scraping over concrete, paving and hard surfaces
  • Less material loss through abrasion – the bar stays sharp for longer
  • Replaceable when worn

In addition, the back and base of the bucket are reinforced to withstand the stresses caused by materials such as solid manure, stones in manure and silage residues.

„Small“ series – three widths, one design

Comparison of „Small“ grab bucket versions with Euro mounting
Feature1.050 mm (this model)1.250 mm1.450 mm
Working width1.050 mm1.250 mm1.450 mm
Volumeapprox. 0,41 m³approx. 0,49 m³approx. 0,57 m³
Opening widthmax. 1.000 mm
Cylinders2
Unladen weight (Euro)approx. 280 kgapprox. 290 kgapprox. 300 kg
Article numberDSSFLM100050VDSSFLM120050VDSSFLM140050V

All three versions have the same opening width (max. 1.000 mm), the same two hydraulic cylinders and the same scraper bar made from HB-500 steel. The only difference is the working width and the resulting volume.

Who it is designed for

  • Beef and dairy farms: Collect and load manure from cubicles and passageways – the 1.050-mm width fits most cubicle rows
  • Horse farms and stud farms: Clear horse manure and bedding from stables
  • Biogas plants: Transport silage and substrate from the clamp to the feed-in system
  • Local authorities and landscapers: Collect green waste, leaves and compost
  • Compact tractor owners: The 280 kg unladen weight is suitable for front loaders on tractors from approx. 40–50 hp

What the grab bucket does not have – and why

  • No tines like a grab fork: The grab bucket has a closed base – ideal for bulk materials, wet manure and silage that would fall through tines. For handling dry solid manure, hay or straw, the Fliegl „Small“ grab fork (DSGFLM) is the right alternative.
  • No oil cooler: The cylinders operate without additional cooling under normal conditions. When using the bucket continuously, monitor the tractor's hydraulic oil temperature.
  • No quick-change frame: The mounting is fixed and conforms to the Euro standard. If you frequently change attachments, you will need a quick-change adapter on the front loader.

Frequently asked questions

Which front loader do I need for the grab bucket?

A front loader with Euro mounting and at least one double-acting hydraulic connection. The bucket weighs approx. 280 kg, plus the load. The tractor should have a front loader lifting capacity of at least 800–1.000 kg at the fork.

Can I also use the bucket on a yard loader?

Not in this version. The DSSFLM series has Euro mounting. Fliegl also offers the same grab bucket with yard loader mounting (DSSHFL series) – this is approx. 50 kg heavier (approx. 330 kg at 1.050 mm).

What is the difference between a grab bucket and a grab fork?

The grab bucket (DSSFLM) has a closed base and is suitable for silage, wet manure, bulk materials and anything that would fall through tines. The grab fork (DSGFLM) has individual tines and is suitable for dry solid manure, hay, straw and loose long materials.

Which bucket width is right for me?

The 1.050-mm version is suitable for narrow livestock building passageways and light front loaders. The 1.250 mm version is the all-rounder. The 1.450 mm version offers the greatest volume and is suitable for farms with wide access routes and more powerful tractors.

How long does the scraper bar last?

The scraper bar made from HB 500 wear-resistant steel lasts significantly longer than a standard steel bar under normal use on concrete and hard surfaces. Its service life depends on the ground surface and duration of use. The bar is replaceable.

Properties
Gerätetyp : Silagegeräte
Working width: 1,05m
volume: 410L