Skip to main content Skip to search Skip to main navigation
Menu

Fliegl levelling and snow plough blade »Mammut Duplex«, 2700 mm, galvanised

Skip product gallery

Zubehör

OPTION Fliegl mount adapter for municipal plate size 5 (DIN 15432) incl. hydraulic height adjustment for levelling and snow plough blade »Mammut Mono«
Prod. no.: FAC-PSSFLI200876
Hersteller:

Regular price: €3,026.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl mount adapter for municipal plate size 3 (DIN 76060) incl. hydraulic height adjustment for levelling and snow plough blade »Mammut Duplex«
Prod. no.: FAC-PSSFLI200875-2
Hersteller:

Regular price: €2,915.50
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl control block for simultaneous swivelling of the 2 wings, incl. control panel – surcharge for levelling and snow plough blade »Mammut Duplex«
Prod. no.: FAC-PSSFLI200505
Hersteller:

Regular price: €1,225.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl adapter plate from three-point mount to yard loader, wheel loader or telehandler mount for levelling and snow plough blade »Mammut Mono«
Prod. no.: FAC-PSSHRT200525
Hersteller:

Regular price: €738.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl skids Ø 178 mm, height 270 mm, Ø 10 mm with internal compression spring and support spindle – surcharge for levelling and snow plough blade »Mammut Mono«
Prod. no.: FAC-PSSFLI270210
Hersteller:

Regular price: €666.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl scraper edges made of HB 500 steel – surcharge, 2700 mm for levelling and snow plough blade »Mammut Duplex«
Prod. no.: FAC-PSSFLI270302
Hersteller:

Regular price: €423.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl rubber strips with fabric insert 2700 mm (1350 × 200 × 50 mm) – surcharge for levelling and snow plough blade »Mammut Duplex«
Prod. no.: FAC-PSSFLI900190-2
Hersteller:

Regular price: €189.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl warning flags white/orange 500 × 500 mm – made of polyester, with wooden pole 800 mm and holder for levelling and snow plough blade »Mammut Mono«
Prod. no.: FAC-PSSFLI270320
Hersteller:

Regular price: €180.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
OPTION Fliegl warning stripes – surcharge for levelling and snow plough blade »Mammut Duplex«
Prod. no.: FAC-ETZXXX916600-2
Hersteller:

Regular price: €144.00
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1 × Fliegl grading and snow-clearing blade “Mammut Duplex”, 2,700 mm, galvanised
  • Three-point linkage and Euro mount
  • Polyurethane scraper bar (fitted)
  • Parking support

Not included in the scope of delivery: Support wheels, control block, warning equipment and HB-500 steel scraper bar – available separately as accessories.

Technical data

ModelMammut Duplex
ManufacturerFliegl Agrartechnik GmbH
Product typeGrading and snow-clearing blade
DesignDuplex – wings pivot on both sides
MountThree-point linkage mount and Euro mount
Surface finishHot-dip galvanised
Dimensions and weight
Working width2,700 mm
Blade height820 / 980 mm
Unladen weight580 kg
Adjustment and operation
Wing pivotingBoth sides, +26° / −21°
Ground contour followingSideways ±5°
Share adjustmentHydraulic
Overload protectionSpring flaps
Hydraulic connection1 × double-acting
Scraper bar
Material (standard)Polyurethane (PU)
Dimensions (standard)200 × 40 mm
Alternative (accessory)HB 500 steel scraper bar, 25 × 200 mm

Product description

What “Duplex” means – and why it is more than just a name

The key difference between the Mammut Mono and the Mammut Duplex lies in the wing design: on the Mono, only one wing pivots hydraulically, whereas on the Duplex both do. This may sound like a minor detail, but it fundamentally changes the range of applications:

  • V position: Both wings pivot forwards – the blade pushes snow or material outwards to both sides. Ideal for large areas, farmyards and car parks.
  • A position (gathering position): Both wings pivot backwards – the material is pushed towards the centre. Useful for grading and spreading.
  • Angled left or right: One wing forwards, the other backwards – snow is directed to one side. The standard setting for roads and tracks.
  • Straight position: Both wings in line – a conventional grading blade for earthmoving, spreading gravel and levelling farmyards.

With the Mono, you can only clear to one side or grade straight ahead. The Duplex offers all four positions, making it one blade for every task – winter maintenance and grading work in summer.

Pivot angles of +26° / −21° – what this means in practice

The asymmetrical pivot range of +26° forwards and −21° backwards is due to the design: the greater forward angle provides more aggressive snow clearance in the V position. When angled, the two angles combine to give a total pivot range of 47°, creating a substantial sideways discharge distance at a working width of 2,700 mm.

Galvanised – why it matters for winter maintenance equipment

Road salt and brine are the biggest enemies of a snow blade. A painted blade develops corrosion spots wherever it is scratched or chipped by stones. Hot-dip galvanising provides protection in a different way: even if the surface is damaged, the zinc forms a sacrificial layer that protects the steel underneath from rust (cathodic corrosion protection). On equipment that is constantly exposed to salt, brine and moisture during winter maintenance, this significantly extends its service life.

Fliegl also offers the Mammut Duplex in a painted finish – this can save money if you mainly use the blade for grading in summer and do less winter maintenance. For regular winter maintenance, the galvanised version is the right choice.

Polyurethane vs steel – choosing the right scraper bar

PropertyPolyurethane (PU), 200 × 40 mmHB 500 steel, 25 × 200 mm (accessory)
SurfaceAsphalt, paving, block paving, yard slabsGravel, farm tracks, earth
Noise levelQuiet – no metal scrapingLoud – typical share noise
Surface protectionVery high – no scratches on paving stonesLow – may damage delicate surfaces
WearHigher – particularly on rough surfacesLower – HB 500 is wear-resistant steel
Clearing performance on iceLess effective – slides over iceBetter – scrapes ice away
Summer useSuitable for grading on paved surfacesBetter for earth and gravel work

Recommendation: The standard PU bar is the right choice for clearing paved surfaces – farmyards, car parks, urban pavements and paved areas. If you regularly work on gravel tracks or unpaved surfaces, order the HB 500 steel scraper bar as an accessory.

Ground contour following ±5° and spring flaps – blade protection in operation

The sideways ground contour following of ±5° compensates for uneven ground without the blade lifting on one side or tearing up the surface. This is particularly useful on sloping driveways and uneven surfaces.

The spring flaps provide overload protection: if the cutting edge hits a solid obstacle (manhole cover, kerb or gully frame), it folds over the obstacle and returns to the working position on the other side. This protects both the blade and the surface, and prevents damage to the three-point linkage and the tractor’s rear axle.

Control block – when you need one

In the standard configuration, the two wings are operated via one double-acting hydraulic connection on the tractor. Without the optional control block (accessory), the wings can be moved into position one at a time – by reconnecting the hydraulic hose or stopping to adjust them.

The control block with control panel allows you to pivot both wings simultaneously from the driver’s seat: select the V, A or angled position at the touch of a button, without getting out. For professional winter maintenance with frequent changes of position, the control block is practically indispensable.

Who it is designed for

The Mammut Duplex 2,700 mm is aimed at farmers, local authorities, agricultural contractors and public works depot operators looking for a combined grading and snow-clearing blade for tractors. Typical applications include:

  • Winter maintenance: Farmyards, business premises, access roads, car parks and farm tracks
  • Year-round use: Grading gravel, crushed stone and earth; levelling farmyards; clearing silage clamp areas

The 2,700 mm working width is suitable for tractors from around 80–100 hp with three-point linkage hydraulics and at least one double-acting spool valve. With an unladen weight of 580 kg, the tractor must have sufficient rear axle load capacity and lifting capacity at the three-point linkage.

Where the Mammut Duplex sits in the Fliegl blade range

ModelDesignWorking widthsBlade heightSpecial feature
“Olaf”Single blade2,500 mm–Entry-level model, three-point linkage
Mammut Mono1 pivoting wing2,700, 3,000 mm955 mmAngles to one side only
Mammut Duplex2 pivoting wings2,300, 2,700, 3,000, 3,300 mm980 mmV/A/angled positions, both sides
“Maxi”Large-area blade4,000–6,000 mm–For wheel loaders and large tractors

The Duplex is the most versatile model in the Mammut range: more working widths than the Mono, wings that pivot both ways for all positions, and the tallest blade at 980 mm. If you only clear in one direction and want to benefit from the lower price, choose the Mono. If you need flexibility to change positions, choose the Duplex.

What the Mammut Duplex does not have – and why

No rubber facing on the blade: Unlike municipal snow ploughs with a rubber cutting edge, the Mammut has a PU scraper bar along the lower edge, but no additional rubber facing on the blade surface. This is common for a combined grading and snow-clearing blade – grading work with earth and gravel would quickly destroy a rubber facing.

No spring-bolt system: Some manufacturers use spring bolts to secure the wings as additional overload protection. On the Mammut Duplex, the spring flaps on the cutting edge perform this function – they protect the entire blade, not just the wing joints.

Frequently asked questions

What is the difference between the Mammut Mono and Mammut Duplex?

On the Mono, only one wing pivots hydraulically – you can only angle the blade in one direction or use it straight. On the Duplex, both wings pivot, also allowing V and A positions and angling in either direction. The Duplex is more versatile, but also heavier and more expensive.

Will the blade fit my tractor?

The Mammut Duplex 2,700 mm has a three-point linkage and Euro mount. If your tractor has a rear three-point linkage and at least one double-acting spool valve, you can connect the blade. With an unladen weight of 580 kg, your tractor should have at least 80–100 hp and sufficient rear axle load capacity.

Can I use the blade for grading in summer?

Yes – this is one of the Mammut’s main advantages. In the straight position, the blade works as a grading blade for gravel, crushed stone, earth and other bulk materials. For earth and gravel work, the optional HB 500 steel scraper bar is recommended instead of the standard PU bar.

Do I need the optional control block?

If you need to switch regularly between V, A and angled positions (e.g. for professional winter maintenance), the control block with control panel is practically indispensable – it allows you to pivot both wings from the driver’s seat. For occasional use with a fixed blade position, you can do without it.

How long does the polyurethane scraper bar last?

Service life depends on the surface and intensity of use. On smooth asphalt, a PU bar typically lasts for one or several winter seasons. It wears more quickly on rough surfaces (broken asphalt, cobblestones). PU bars are designed as wear parts and are easy to replace.

Properties
Gerätetyp : Schiebe- und Räumschild
Working width: 2,7m