Skip to main content Skip to search Skip to main navigation
Menu

Fliegl Hydraulic Branch Shear Head 2,000 mm, MS03, up to Ø 150 mm

Description

Scope of Delivery

  • 1 × Fliegl branch shear head, 2,000 mm cutting width, with MS03 mount

Note: Hydraulic hoses from the excavator to the shear head are typically not included – please confirm with the supplier.

Technical Data

ManufacturerFliegl Agro-Center GmbH
Product typeBranch shear head / hedge cutter for excavators
Cutting width2,000 mm
Max. branch diameterapprox. Ø 150 mm
MountMS03 (quick coupler for 3–8 t excavators)
Weightapprox. 300 kg
Hydraulics and Blades
Min. oil flowfrom 45 l/min
Max. operating pressure⚠ Please request from manufacturer
Blade barHigh-wear-resistant steel HB 500
Cutting principleShear cut – clean cut without splitting

Product Description

Shear Cut Instead of Mulching – Why It Makes the Difference

Conventional mulchers break down branches and hedges with rapidly rotating flails – the result is frayed cut surfaces, split wood and large wound areas on the tree. For roadside clearance or industrial sites, that may be acceptable. For proper tree care, it is not.

The Fliegl branch shear head works on the shear principle: a moving blade bar cuts against a fixed counter blade – like an oversized hedge trimmer. The result is a smooth, clean cut:

  • No splitting: The wood is cut, not torn – the bark remains intact
  • Faster wound healing: Smooth cut surfaces heal significantly faster than frayed ones – less fungal infection, fewer diseases
  • Clean appearance: The pruning looks well-maintained – important in residential areas, parks and along avenues

HB 500 Blade Bar – What Does That Mean?

HB 500 stands for a Brinell hardness of 500 – this is high-wear-resistant steel, the same grade used in crusher wear parts and excavator bucket cutting edges. For a blade bar, this means:

  • Long service life: The cutting edges stay sharp significantly longer than standard steel
  • Resistant to stones and foreign objects: When working along roadsides, the blade occasionally hits stones or fence posts – HB 500 does not chip easily
  • Re-sharpenable: Despite the high hardness, the blades can be resharpened with appropriate tools

Ø 150 mm – Which Branches Can the Head Cut?

Cutting Performance by Wood Type
Wood typeTypical branch diameterCut possible?
Hedges (privet, hornbeam, thuja)5–30 mmYes – core application
Fruit trees (apple, pear, cherry)20–80 mmYes
Deciduous trees (oak, beech, maple)30–150 mmYes – up to Ø 150 mm
Conifers (spruce, pine)30–200 mmLimited – not above Ø 150 mm
Heavier deadwood100–300 mmNo – dry hardwood above 150 mm exceeds the shear’s capacity

MS03 Mount – Which Excavators Is the Shear Head Compatible With?

The MS03 quick coupler is the standard for compact and mini excavators from 3 to approx. 8 t operating weight, with a pin spacing of approx. 250 mm. At only 300 kg, the shear head is deliberately lightweight – even a 3 t mini excavator can safely pick it up and operate it.

Excavator Compatibility
Excavator classMS03 available?45 l/min available?Suitable?
1–2 t mini excavatorNo (MS01)Usually noNo
3–5 t compact excavatorYesCheck (30–60 l/min)Yes, ideal
5–8 t excavatorYesYes (60–120 l/min)Yes
Over 8 tNo (MS08+)YesNo – adapter possible

The manufacturer also recommends the shear head as a “loose” attachment without a fixed mount – ideal for flexible use with various mini excavators.

Built For

  • Municipalities and road maintenance departments: Clearing roadsides, creating clearance profiles, cutting back hedges at intersections
  • Landscapers (GaLaBau): Hedge trimming, tree care, pruning in parks and residential complexes
  • Farmers with hedgerow maintenance: Maintaining field hedgerows – clean cuts instead of mulching
  • Forestry operations: Roadside maintenance, young stand care, clearing skid trails
  • Utilities and grid operators: Clearing power line corridors, around pylons and substations

Branch Shear Head vs. Mulcher – When to Use Which?

Decision Guide: Shear Head or Mulcher?
CriterionBranch shear head (this unit)Mulcher
Cut qualityClean shear cutFrayed, split
Suitable for tree care?YesNo – damages the tree
CuttingsRemain in pieces – may need clearingShredded immediately
Roadside maintenanceYes – clean and fastYes – fast, but messy
Area mulchingNo – cutting only, no mulchingYes
NoiseSignificantly quieterLoud (flails hitting wood)
Weight300 kg – mini excavator compatibleFrom 200–400 kg
MaintenanceLow – resharpen bladesHigher – flails, belts, rotor

What the Shear Head Cannot Do – and Why

  • No area mulching: The shear head cuts branches – it does not mulch grass, shrubs or ground cover. For that, a mulcher is the right choice.
  • No branches above Ø 150 mm: Thicker branches or trunks exceed the shear’s capacity – for those, a tree shear or felling grapple is required.
  • No collection basket: Cuttings fall downward – when working above roads, the area must be cordoned off.

Frequently Asked Questions

Why is the shear cut better for trees than mulching?

A mulcher tears the wood – the bark splits open, the cut surface becomes large and irregular. Fungal spores and bacteria can easily enter. A shear cut is smooth – the wound surface is minimal, the bark remains intact, and the tree can close the wound quickly. This is why many tree protection ordinances require shear cutting.

Does the shear head fit my mini excavator?

The shear head has an MS03 mount and requires at least 45 l/min hydraulic oil flow. This fits compact excavators from approx. 3 t with an MS03 quick coupler. Smaller mini excavators (1–2 t, MS01) have neither the correct mount nor sufficient hydraulic capacity.

How often do the blades need resharpening?

This depends on operating hours and the material being cut. Rule of thumb: With regular use (several hours per week), resharpen every 2–4 weeks. HB 500 steel lasts significantly longer than standard blades. Stones and foreign objects in the cutting area reduce blade life considerably.

Can the shear head be operated sideways on the excavator boom?

Yes – this is the typical application. The excavator stands at the roadside while the boom guides the shear head sideways along the hedge or tree crown. Through the MS03 mount on the quick coupler, the head can be positioned at various angles. For even greater flexibility, a tilt rotator or swing motor can be mounted between the quick coupler and the shear head.

Is the shear head suitable for winter use?

The shear head can be used at temperatures down to approx. −10 °C – wood is actually easier to cut in frost because it becomes more brittle. Limitation: In severe frost, hydraulic hoses may stiffen – allow the system to warm up first. Also note: Many tree protection regulations only permit pruning outside the growing season (October to February) – winter is therefore the main season.