Fliegl holder »Easy« for big bags, Height 1680 mm; Width 1230 mm; Reach 610 mm (Mounting on Euronorm)
€625.00
Scope of delivery
- 1× Fliegl Big Bag holder, »Easy« version
- Euro mounting (Euronorm), pre-assembled
- Hooks for attaching the Big Bag loops
Technical data
| Manufacturer | Fliegl |
|---|---|
| Equipment type | Big Bag holder for front loaders |
| Mounting | Euro mounting (Euronorm) |
| Height | 1.680 mm |
| Width | 1.230 mm |
| Reach | 610 mm |
| Weight (approx.) | 76 kg * |
* Weight from dealer source – awaiting manufacturer confirmation.
Product description
Who it is designed for
The Fliegl Big Bag holder is designed for farmers, agricultural contractors, local authority depots and businesses that regularly handle Big Bags of bulk materials. Typical applications include lifting, transporting and dispensing fertiliser, seed, road salt, lime, pellets, sand or animal feed. The holder attaches directly to the front loader via the Euro mounting, making the Big Bag ready to lift and transport straight away.
Euro mounting – fits any front loader with Euronorm
Euro mounting (Euronorm) is the most widely used quick-change standard for agricultural front loaders. The holder locks into place like any other Euro attachment – remove the bucket, fit the holder, and you’re ready to go. This eliminates the need for an adapter, and changing attachments takes less than a minute.
Compact design weighing 76 kg
With an unladen weight of around 76 kg, the Fliegl Big Bag holder is one of the lightest pieces of equipment in this category. Its low weight puts less strain on the front loader’s lifting capacity, leaving more payload available for the Big Bag itself. By comparison, conventional Big Bag holders with Euro mounting weigh between 90 and 120 kg.
Reach of 610 mm – Big Bag clear of the loader
The 610 mm reach indicates how far the hooks sit in front of the Euro mounting. This distance allows the Big Bag to hang clear in front of the front loader without hitting the loader arm or tractor. This is essential when emptying the Big Bag into a container, machine or spreader, where the front loader needs to be positioned precisely.
Height of 1.680 mm – room for standard Big Bags
The overall height of 1.680 mm is designed for standard Big Bags with the usual dimensions of 90 × 90 × 90 cm or 100 × 100 × 100 cm. The Big Bag hangs freely below the hooks and does not touch the ground, even when the front loader is raised to its maximum height. This keeps the bottom of the Big Bag clean and allows the bulk material to flow freely downwards when the bottom valve is opened.
Width of 1.230 mm – suitable for common Big Bag sizes
The width of 1.230 mm accommodates standard Big Bags (with base dimensions of 90 × 90 cm and 100 × 100 cm). A Big Bag’s four loops are positioned at the corners, so the holder must be wider than the diagonal of the base to allow the loops to be hooked on without tension. At 1.230 mm wide, it easily accommodates both standard sizes.
Comparison with other Big Bag holders
| Feature | Fliegl »Easy« | Düvelsdorf Big Bag holder Euro |
|---|---|---|
| Mounting | Euro | Euro |
| Height | 1.680 mm | – |
| Width | 1.230 mm | 1.150–1.400 mm (adjustable) |
| Reach | 610 mm | – |
| Weight | approx. 76 kg | 111 kg |
| Load capacity | not yet confirmed | 1.200 kg |
| Hook adjustment | not yet confirmed | Height 1.300–1.450 mm |
| Finish | not yet confirmed | Powder-coated |
What this Big Bag holder does not have – and why
| Feature | Why not | Alternative |
|---|---|---|
| Hydraulic emptying / metering slide | The holder lifts and transports – dispensing is handled by the Big Bag’s bottom valve or a separate filling bucket | Fliegl »BigBag« filling bucket with hydraulic slide |
| Telescopic width adjustment | »Easy« version: simple, lightweight design without adjustable components | Düvelsdorf Big Bag holder Euro (adjustable from 1.150 to 1.400 mm) |
| Three-point linkage (rear) | Designed as a front-loader attachment – Big Bags are almost always lifted at the front | Fliegl three-point adapter + load hook system |
| Weighing system | Weight detection increases the cost and complexity of a basic piece of equipment | Separate front loader scale between the Euro mounting and holder |
Frequently asked questions
What sizes of Big Bag fit the holder?
The holder is designed for standard Big Bags with base dimensions of 90 × 90 cm and 100 × 100 cm. The key requirement is that the Big Bag has four lifting loops at the top corners – this is the case with the vast majority of commercially available Big Bags.
Will the holder fit my front loader?
The holder has Euro mounting (Euronorm). If your front loader has Euro mounting, the holder will fit directly. This is the case with most European front loaders (e.g. Stoll, Alö, Quicke, Hauer, Hydrac). If your loader uses a different system (e.g. SMS, ALO, Faucheux), you will also need an adapter.
What is the maximum weight of the Big Bag?
Please check with the manufacturer for the holder’s maximum load capacity. Regardless, your front loader must have sufficient lifting capacity. Calculate the total as follows: the holder’s unladen weight (approx. 76 kg) plus the weight of the filled Big Bag (1.000 kg for standard Big Bags, up to 1.500 kg for reinforced versions). Check your loader’s lifting capacity in the data sheet.
Can I empty the Big Bag through the bottom valve?
Yes. Use the front loader to raise the Big Bag to the required height, then open its bottom valve by hand or with a rope. The height of 1.680 mm and the 610 mm reach leave enough space beneath the Big Bag to position a container, machine or spreader underneath.
Do I need a hydraulic connection?
No. The holder is a purely mechanical piece of equipment with no hydraulics. It locks into place via the Euro mounting and operates solely through the front loader’s lifting movement. A double-acting hydraulic connection is only required if you also use equipment with hydraulic metering (e.g. the Fliegl »BigBag« filling bucket).
Is the holder suitable for road salt and fertiliser?
The holder itself does not come into direct contact with the bulk material – it remains inside the Big Bag. Road salt and fertiliser can therefore be lifted and transported without any problems. Make sure the Big Bag itself is suitable for corrosive bulk materials (PE inner liner).