Fliegl heavy material bucket »Standard«, 2200 mm, painted; Volume approx. 0.85 m³; Load capacity max. 3000 kg
€1,235.00
Scope of delivery
- 1× Fliegl heavy-duty bucket, working width 2.200 mm, painted
- Euro mounting frame (Euro-standard mounting)
- Cutting edge made from highly wear-resistant HB 500 steel (150 × 16 mm)
Technical data
| Manufacturer | Fliegl Agrartechnik GmbH |
|---|---|
| Type | Heavy-duty bucket, »Standard« series |
| Mounting | Euro mounting (Euro standard) |
| Working width | 2.200 mm |
| Depth | 860 mm |
| Height | 740 mm |
| Capacity | approx. 0,85 m³ |
| Max. load capacity | 3.000 kg |
| Weight | approx. 260 kg |
| Cutting edge | HB 500, 150 mm wide, 16 mm thick |
| Bucket body | Formed from a single piece, tapered design |
| Base | Reinforced |
| Top edge | Continuous reinforcing profile |
| Surface | Painted |
Product description
Who it is designed for
The Fliegl heavy-duty bucket with a working width of 2.200 mm is designed for farmers, contractors and local authorities who regularly move heavy bulk materials such as gravel, crushed stone, sand, soil or manure with a front loader. With a load capacity of 3.000 kg and a volume of 0,85 m³, it is built for demanding, continuous use in earthmoving and material handling – wherever a light-material bucket reaches its limits.
Formed from a single piece – no weld seams in load-bearing areas
The bucket body is formed from a single steel plate. This eliminates weld seams in the heavily stressed base area, which can act as weak points in conventional construction. Combined with the reinforced base, this creates a design that can withstand scraping through compacted material.
Tapered design for clean emptying
The bucket’s side walls are tapered – wider at the top than at the bottom. Wet soil, clay or sticky manure slides out more easily when tipping than from buckets with parallel sides. This saves time with every unloading operation and reduces the amount left in the bucket.
Cutting edge made from HB 500 steel
The cutting edge along the bottom is made from highly wear-resistant steel with a hardness of 500 HB. At 150 mm wide and 16 mm thick, it offers a generous wear allowance. When scraping over asphalt, concrete or stony ground, it lasts considerably longer than conventional mild-steel edges.
Reinforcing profile along the top edge
A continuous reinforcing profile along the top edge prevents the bucket from twisting or bending under heavy loads. Combined with the body formed from a single piece, this provides high torsional rigidity – even when loading off-centre.
Available widths
| Working width | Application |
|---|---|
| 1.800 mm | Compact tractors, narrow farmyard entrances |
| 2.000 mm | Standard tractors, medium load volumes |
| 2.200 mm | This item – the ideal width for larger front loaders |
| 2.400 mm | Large front loaders, high throughput |
Other widths are available on request.
What this heavy-duty bucket does not have – and why
| Feature | Why not | Alternative |
|---|---|---|
| Folding front wall | Adds considerable weight and cost; not needed for straightforward material handling | Saphir KS folding bucket for gripping and levelling |
| Teeth / ripping tines | Not required for bulk materials; use a mounted ripper on hard ground | Separate scraping teeth available on request |
| Hot-dip galvanising | Painted version is cheaper; galvanising is available as an option | Fliegl hot-dip galvanised heavy-duty bucket |
Frequently asked questions
Will the Fliegl heavy-duty bucket fit my front loader?
Yes, provided your front loader has a Euro mounting (Euro standard). This is the case with most European front loaders. The bucket is supplied fully assembled with a Euro mounting frame.
Can I use the bucket for scraping?
Yes. The HB 500 steel cutting edge is specifically designed for scraping work. You can use it to remove soil, push manure into heaps or level gravel. When working on hard surfaces such as asphalt, you benefit from the long service life of HB 500 steel.
How much does the bucket weigh?
The heavy-duty bucket with a working width of 2.200 mm weighs approx. 260 kg. Make sure your front loader’s lifting capacity and payload can accommodate this weight plus the load (max. 3.000 kg).
Is the bucket also available hot-dip galvanised?
Yes. Fliegl also offers the »Standard« heavy-duty bucket in a hot-dip galvanised version. Galvanising provides longer-lasting corrosion protection than paint, but costs more. Ask us about the galvanised version.
Which width is right for my business?
The width depends on the size of your front loader and the space available. 2.200 mm is the standard choice for front loaders from approx. 80 PS upwards. For compact tractors, we recommend 1.800 or 2.000 mm; for large front loaders, 2.400 mm.
Is the cutting edge replaceable?
The cutting edge is designed as a wear part. Please check when ordering whether it is bolted or welded in place – a bolted edge is easier to replace.
| Gerätetyp : | Schaufel |
|---|---|
| Working width: | 2.20m |
| volume: | 850L |