Skip to main content Skip to search Skip to main navigation
Menu

Fliegl guide rail »Schwerlast«, 2000 mm, without mount; unpainted; Mounting FEM 3A

Description

Scope of delivery

  • 1 × Fliegl guide rail »Heavy-duty«, 2,000 mm wide
  • Mounting: FEM 3A (height 476 mm)
  • Surface: raw (untreated)

Not included:

  • No loader attachment (Euronorm, wheel loader, etc.) – must be sourced separately or ordered as a variant
  • No fork tines – must be ordered separately with FEM 3A mounting

Technical data

Model»Heavy-duty« guide rail
ManufacturerFliegl Agrartechnik GmbH
Width2,000 mm
MountingFEM 3A, height 476 mm
AttachmentNone – own attachment required
ForksNone – order separately
Weight (approx.)178 kg
SurfaceRaw (untreated)

Product description

What is a guide rail – and why are there different types?

A guide rail (also known as a fork carrier or fork carriage) is the horizontal crossbar onto which the fork tines are hooked. It forms the link between the loader (wheel loader, telehandler, front loader) and the forks.

The guide rail determines two things:

  1. The mounting class – which forks fit (here: FEM 3A)
  2. The working width – how far apart the forks can be moved (here: up to 2,000 mm)

Fliegl’s »Heavy-duty« designation identifies the stronger product range – compared with the standard guide rail, it is designed for heavier loads and larger loaders.

FEM 3A – what does it mean?

The FEM classification (Fédération Européenne de la Manutention, equivalent to ISO 2328) divides fork mountings into classes according to load capacity and design:

FEM classes at a glance
ClassLoad capacity (at 500 mm load centre)Mounting heightTypical application
FEM 2Aup to 2,500 kgapprox. 406 mmCompact wheel loaders/telehandlers, larger front loaders
FEM 3A2,501–4,999 kg476 mmMedium to large wheel loaders, telehandlers
FEM 4A5,000–9,999 kg560 mmLarge wheel loaders, heavy-duty telehandlers

The number (2, 3, 4) determines the load capacity class. The letter (A or B) describes the design of the mounting – in particular the fork drop (distance from the bottom edge of the hook to the ground). Form A is the most common design in agricultural machinery.

Important: The guide rail and fork tines must be in the same FEM class. FEM 2A forks do not fit a FEM 3A rail, and vice versa.

“Without attachment” – who is this for?

This variant is supplied without a pre-fitted loader attachment. It is the right choice if:

  • you want to weld or bolt the guide rail to your own existing attachment plate
  • you have a loader with a special attachment standard for which Fliegl does not offer a ready-made variant
  • you want to integrate the rail into your own design (e.g. a fixed fork holder or a custom build)

If you are looking for a ready-made solution, the heavy-duty guide rail is also available with:

  • Euronorm attachment (STGFLM000126, 190 kg, painted)
  • Wheel loader/telehandler attachment (STGRTL000126, 224 kg, painted)

“Raw” – what does this mean for durability?

The surface is untreated – no paint, galvanising or primer. The raw material will rust when exposed to moisture.

Advantage: If you are welding the rail to your own structure, the surface would have to be removed anyway – saving you a step. You can also choose your own corrosion protection: two-pack paint, hot-dip galvanising after welding, or powder coating.

Disadvantage: Without further treatment, the rail is not suitable for permanent outdoor use. If you do not want to apply your own corrosion protection, order the painted version (STGFLM000126 or STGRTL000126).

Comparing the heavy-duty guide rail variants

FeatureWithout attachment, rawEuronorm, paintedWheel loader/telehandler, painted
Article numberSTGFLM000128STGFLM000126STGRTL000126
Width2,000 mm2,000 mm2,000 mm
MountingFEM 3AFEM 3AFEM 3A
AttachmentNoneEuronormWheel loader/telehandler
SurfaceRawPaintedPainted
Weight178 kg190 kg224 kg
ForksNoneNoneNone

The difference in weight is due to the attachment plate: the wheel loader/telehandler attachment weighs approx. 46 kg more than the version without an attachment, while the Euronorm attachment weighs approx. 12 kg more. All three variants use the same rail.

Who it is designed for

The heavy-duty guide rail without an attachment is intended for:

  • Agricultural machinery workshops and contractors who design their own implements and need a universal fork rail as a base
  • Businesses with specialist loaders (e.g. older wheel loaders with a manufacturer-specific attachment) that cannot find a suitable ready-made solution
  • Forklift conversion specialists who integrate the rail into an existing design
  • Customers who galvanise components themselves – the raw version is better suited to this than a rail that has already been painted

What the guide rail does not have – and why

  • No forks: Forks are subject to their own standards (FEM/ISO 2328) and are selected according to load capacity, length and cross-section. Fliegl therefore offers forks as separate accessories, allowing customers to choose forks to suit their application.
  • No sideshift: The guide rail is a simple crossbar. If you want to move the forks sideways hydraulically, you need a rotator or sideshift attachment.
  • No load capacity rating: The load capacity is determined by the weakest component in the system (loader, attachment, rail, forks). The manufacturer therefore does not specify a load capacity for the rail alone.

Frequently asked questions

Which fork tines fit this guide rail?

All fork tines with FEM 3A mounting (hook dimension: 476 mm high). The forks are hooked into the guide rail from above and secured with a locking pin. Make sure the forks are also FEM class 3A – class 2A or 4A forks will not fit.

What does “without attachment” mean?

The guide rail is supplied without a loader attachment – it has no mounting plate for Euronorm, wheel loaders or telehandlers. You must weld or bolt the rail to an attachment plate yourself, or order one of the variants with an attachment.

Can I have the rail painted or galvanised afterwards?

Yes, the “raw” version is designed for exactly this purpose. The untreated surface is suitable for hot-dip galvanising (recommended for agricultural and outdoor use), powder coating or wet painting. If you do not want to apply your own corrosion protection, order the painted version.

How does the heavy-duty rail differ from a standard rail?

The “Heavy-duty” range is designed for heavier loads and larger loaders: thicker material, FEM 3A instead of FEM 2A, and a wider design (2,000 mm). The standard range is lighter and designed for front loaders with lower lifting capacity.

Do I need a double-acting spool valve?

No. The guide rail itself has no hydraulics. The forks are hooked into the rail mechanically and moved by hand. A hydraulic connection is only required if you also fit a sideshift or rotator.

Properties
Gerätetyp : Palettengabel