Fliegl forklift adapter »Multi-Hitch«, implement side three-point mount Cat. 3; inner fork pockets 148 x 70 mm; ball-head coupling K80; load hook up to 2.5 t
€1,825.00
Scope of delivery
- 1 × Fliegl forklift adapter »Multi-Hitch« – Category 3
- Implement side: Category 3 three-point linkage
- Forklift side: Forklift pockets, internal dimensions 148 × 70 mm
- Integrated K80 ball hitch
- Load hook up to 2.5 t
- Finish: fully galvanised
Technical data
| Model | Forklift adapter »Multi-Hitch« |
|---|---|
| Manufacturer | Fliegl Agrartechnik GmbH |
| Article number | SWRFLM000006 |
| Product type | Forklift adapter / manoeuvring and loading aid |
| Weight | 139 kg |
| Finish | Fully galvanised |
| Forklift pockets (internal dimensions) | 148 × 70 mm |
|---|---|
| Three-point linkage | Category 3 (Cat. III) |
| Ball hitch | K80 (80 mm ball diameter, ISO 24347) |
| Drawbar pin | ∅ 35 mm (⚠ check Cat. 3 – 38/42 mm may be possible) |
| Load hook | up to 2,500 kg (2.5 t) |
Product description
What the Multi-Hitch does – and why it solves three problems at once
The Fliegl Multi-Hitch turns an ordinary forklift into a universal manoeuvring and loading aid. The adapter is picked up with the fork tines and locked in place – instantly providing three connection options:
- Category 3 three-point linkage – for rear-mounted implements from large tractors: snow ploughs, mowers, power harrows, rear weights
- K80 ball hitch – for trailers, tipping trailers, tandem three-way tippers, feed mixer wagons
- Load hook up to 2.5 t – for lifting and moving loads, containers and bulk bags
Without the Multi-Hitch, each of these jobs requires a tractor or specialist equipment. With the Multi-Hitch, the forklift you already have can do them all.
Who the Multi-Hitch is designed for
The adapter is designed for businesses with a forklift that need to manoeuvre trailers, move three-point implements or handle heavy loads – without having to start a tractor every time.
Typical applications:
- Agriculture: manoeuvring trailers around the farm, moving implements to the storage area, relocating rear weights
- Agricultural contractors: quickly moving large stocks of equipment – the forklift is often closer than the nearest available tractor
- Local authorities and public works depots: positioning spreaders, snow ploughs and sweepers with a forklift
- Haulage and logistics: manoeuvring trailers inside the warehouse, moving containers with the load hook
Category 3 – for large implements
This Multi-Hitch has a Category 3 three-point linkage. This category is for tractors from around 100 hp and correspondingly heavy implements. The pins are thicker and the mounting points are further apart than on Cat. 2.
| Feature | Cat. 2 (Multi-Hitch SWRFLM000003) | Cat. 3 (this item) |
|---|---|---|
| Typical tractor size | 30–100 hp | from around 100 hp |
| Lower link pin diameter | 28 mm | 36 mm |
| Top link pin diameter | 25 mm | 32 mm |
| Fliegl article number | SWRFLM000003 | SWRFLM000006 |
| Adapter weight | 125 kg | 139 kg |
| Price (ex VAT) | 1.730,00 € | 2.050,00 € |
Choosing the right one: The category must match the implements you want to move – not the forklift. If you have Cat. 3 implements (e.g. a snow plough with 36 mm pins), you need this adapter. If you have Cat. 2 implements, SWRFLM000003 is the right choice.
K80 ball hitch – the standard for heavy trailers
The integrated K80 ball hitch (80 mm ball diameter, to ISO 24347) is the agricultural industry standard for trailers, tipping trailers and trailed implements. It allows the forklift to couple up and manoeuvre trailers directly – around the farm, inside the warehouse or on site.
K80 is the most widely used trailer coupling in agricultural machinery in Europe. Almost all modern tipping trailers, forage wagons, slurry tankers and balers use K80 or the compatible K80R drawbar eye.
Load hook up to 2.5 t – lift without a crane
The integrated load hook gives the forklift a simple lifting device. Bulk bags, container frames and heavy machine parts can be attached to the hook and lifted using the forklift hydraulics – up to a rated load of 2,500 kg at the hook.
Caution: The actual lifting capacity depends on the forklift (load centre, lift height, own weight). The hook is rated for 2.5 t – check the forklift’s load chart to confirm whether it can lift 2.5 t in the required configuration.
Forklift pockets 148 × 70 mm – will they fit my forklift?
The forklift pockets have an internal clearance of 148 × 70 mm (length × height). This accommodates common ISO fork tines with cross-sections up to approx. 140 × 65 mm.
Before ordering, measure the fork tine cross-sections: the height and width at the upper end of the tine, where it enters the pocket. The tines must pass through the 148 × 70 mm opening with clearance.
Fully galvanised – for continuous outdoor use
The Multi-Hitch is fully galvanised. Hot-dip galvanising provides lasting protection against corrosion – even with contact with road salt during winter maintenance, and in rain, snow and damp livestock buildings. Unlike paint, the galvanised coating does not need touching up.
What the Multi-Hitch does not have – and why
The Multi-Hitch has no hydraulic connections. It can pick up and transport three-point implements, but cannot operate them hydraulically. Snow ploughs without their own drive can be positioned – hydraulically folding implements still require a tractor to operate them.
The Multi-Hitch has no PTO. Implements that require a PTO (power harrow, mower, feed mixer wagon) can be transported but not operated.
This is intentional: the Multi-Hitch is a manoeuvring and loading aid, not a tractor replacement. It saves you using a tractor for any job that only involves moving equipment.
Frequently asked questions
Can I tow a three-point trailer with the Multi-Hitch?
The Multi-Hitch is designed for manoeuvring around the business premises, not for road use. Trailers can be coupled using the K80 hitch and moved around the yard. A tractor or towing vehicle approved for road use is required for public roads.
Will the Multi-Hitch fit any forklift?
The adapter fits forklifts with fork tines up to 140 × 65 mm in cross-section (forklift pockets with internal dimensions of 148 × 70 mm). Please measure the cross-sections of your fork tines before ordering.
What is the difference between Cat. 2 and Cat. 3?
The category determines the pin diameters and mounting-point spacing of the three-point linkage. Cat. 2 is suitable for implements from tractors with 30–100 hp (lower link pins 28 mm). Cat. 3 is suitable for implements from tractors with around 100 hp and above (lower link pins 36 mm). Choose the category to match your implements, not your forklift.
Can I also lift vertically with the load hook?
Yes, the load hook is rated for up to 2.5 t. Check the lifting capacity of your forklift at the relevant lift height (load chart). Lifting accessories must comply with the applicable regulations (DGUV Rule 109-005).
Is the Multi-Hitch approved for road use?
No. The Multi-Hitch is an operational aid for use on business premises. An approved towing vehicle is required for road travel.
| Gerätetyp : | Adapter / Aufnahme |
|---|