Skip to main content Skip to search Skip to main navigation
Menu

Fliegl digging bucket, 600 mm, 4 teeth (bolted); Volume 0.042 m³

Description

Scope of delivery

  • 1 × Fliegl backhoe bucket TL 2, 600 mm wide
  • 4 teeth (bolted on)
  • Mounting: MS03SY, including transport lug

Technical data

ModelBackhoe bucket TL 2
ManufacturerFliegl Agrartechnik GmbH
Width600 mm
Volume (SAE)0,042 m³
Number of teeth4 (bolted on)
MountingMS03SY
Weight (approx.)83 kg
Material and wear protection
Bottom and side platesHighly wear-resistant steel HB 450
TeethBolted on – tooth system not specified in further detail
Cutting edgeOptional: extended cutting edge available

Product description

What is a backhoe bucket – and how does it differ from other buckets?

A backhoe bucket (also known as a digging bucket or excavator bucket) is the standard attachment on excavators for loosening, loading and moving soil. It is attached to the excavator arm and works ‘from top to bottom’ – the excavator pushes the bucket into the ground, pulls it towards itself and lifts the material.

Compared with other bucket types:

  • Backhoe bucket: For digging trenches, foundations and channels – narrow design, digging action towards the excavator
  • Ditch-cleaning bucket: Wide and shallow, for levelling and cleaning ditch beds – no teeth
  • Tilting backhoe bucket: Backhoe bucket with hydraulic tilting function for angled excavations

MS03SY – which excavators is this bucket suitable for?

The MS03 mounting is a widely used mechanical quick coupler standard for mini excavators in the approx. 2 to 5 tonne operating weight range. The abbreviation ‘SY’ denotes the symmetrical design of the mounting.

Typical excavators with MS03 mounting:

  • Kubota KX027, KX037, U27, U36
  • Takeuchi TB225, TB230, TB235, TB240
  • CAT 302.7, 303, 303.5
  • Yanmar ViO25, ViO33, ViO35, ViO38
  • Bobcat E26, E27, E32, E35
  • JCB 8025, 8030, 8035

Important: Before ordering, check that your quick coupler accepts the symmetrical MS03 mounting (MS03SY). Some older or manufacturer-specific quick couplers use different dimensions.

Bolted teeth – the advantage over welded teeth

The 4 teeth on this backhoe bucket are bolted on, not welded. This has three advantages:

  1. Replaceable: Worn teeth can be replaced on site – undo the bolts, fit a new tooth and you’re done. No welding equipment needed.
  2. Adaptable: Different tooth shapes can be fitted depending on the ground – pointed teeth for hard ground, wide teeth for soft ground.
  3. Lower maintenance costs: Instead of taking the whole bucket to a welder, you only replace the teeth – saving time and money.

HB 450 – what the hardness rating means

HB 450 indicates a Brinell hardness of approx. 450. This is highly wear-resistant steel, suitable for contact with soil, gravel and crushed stone. For comparison:

Comparison of steel hardness
Steel gradeHardness (Brinell)Typical application
Structural steel S355approx. 160–200Supporting structures, frames
Wear-resistant steel HB 400approx. 370–430Light earthworks, buckets
Wear-resistant steel HB 450approx. 420–480Backhoe buckets, crushing plants, screens
Wear-resistant steel HB 500approx. 470–530Scraper blades, crusher impact plates

The bottom and side plates made from HB 450 withstand abrasive wear from sand, gravel and stones for considerably longer than structural steel. For use in solid rock or demolition material, a bucket with HB 500 wear plates or additional hardfacing is recommended.

0,042 m³ – how much does it hold?

The volume of 0,042 m³ according to SAE (Society of Automotive Engineers – the measurement standard for excavator buckets) is equivalent to around 42 litres. This is a typical capacity for a 600 mm bucket on a mini excavator.

In practice: In loose soil (1.400–1.600 kg/m³), the bucket holds approx. 60–70 kg per scoop. In compacted gravel (1.800–2.000 kg/m³), it holds approx. 75–85 kg per scoop. The actual fill quantity depends on digging depth, material and operator experience.

With or without teeth – which version do you need?

FeatureWithout teeth (TFLBAG020060)With 4 teeth (TFLBAG020061)
Weight63 kg83 kg
Cutting actionSmooth cutting edge – clean cutTeeth break up the ground
ApplicationSoft to medium ground, levelling work, precision trenchingMedium to hard ground, stony terrain, root zones
WearCutting edge wears evenlyTeeth wear first – individually replaceable
Price (net)570 €690 €

Rule of thumb: If you mainly work in undisturbed soil, gravel or stony terrain, you need the version with teeth. For topsoil, sand or levelling work only, the version without teeth is sufficient – it also leaves a smoother trench bed.

Who it is designed for

The TL 2 backhoe bucket is designed for:

  • Landscaping businesses (garden and landscape construction) – planting holes, foundations and drainage trenches using mini excavators in the 2–5 t class
  • Civil engineering and sewer construction companies – 600 mm-wide utility trenches for water, wastewater, electricity and fibre-optic cables
  • Farms – drainage, fence posts and small earthworks using a farm excavator
  • Municipal works departments – repair work on roads, pavements and sewer systems

What the backhoe bucket does not have – and why

  • No hydraulic tilting function: For angled excavations (e.g. embankments or sloping cable trenches), you need a tilting backhoe bucket or a separate tilting module.
  • No ripper tooth: For rocky ground or compacted layers, a ripper tooth or hydraulic breaker is a better choice.
  • No quick-coupler plate for other systems: The bucket only fits MS03SY. Separate versions or adapter plates are available for other mountings (MS01, MS08, OilQuick, Lehnhoff etc.).

Frequently asked questions

Will the backhoe bucket fit my mini excavator?

The bucket has an MS03SY mounting (symmetrical). It fits all mini excavators with an MS03 quick coupler in the approx. 2 to 5 tonne operating weight range. Before ordering, check whether your quick coupler uses the MS03 system – this information is in your excavator’s data sheet or on the quick coupler’s identification plate.

Can I replace the teeth myself?

Yes. The teeth are bolted on, not welded. You can replace them on site using standard tools (spanner and, if necessary, an impact wrench). Ask your supplier which tooth system is fitted and which replacement teeth are compatible.

What does the volume 0,042 m³ SAE mean?

SAE is the Society of Automotive Engineers’ measurement standard for excavator bucket capacity. 0,042 m³ is equivalent to approx. 42 litres. The actual fill quantity depends on the material – loose soil fills the bucket higher, while compacted gravel remains below the SAE figure.

Is the bucket available in other widths?

Fliegl offers backhoe buckets in various widths. It is best to ask your dealer directly about the available widths and mountings, as not all combinations are listed in the online shop.

Do I need the optional extended cutting edge?

The extended cutting edge projects the cutting edge forwards beyond the teeth. This improves penetration into hard ground and protects the bucket body. It is worthwhile in hard, stony or clay soil, where the bucket is difficult to push into the ground.

Properties
Gerätetyp : Baggerlöffel
Working width: 0,60m
volume: 42L