Skip to main content Skip to search Skip to main navigation
Menu

Fliegl digging bucket, 500 mm, 4 teeth (welded); Volume 0.282 m³

Skip product gallery

Alternativen

Fliegl digging bucket, 500 mm, 0 teeth (welded); Volume 0.282 m³
Prod. no.: FAC-TFLBAG120050
Hersteller:

Regular price: €1,911.88
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Description

Scope of delivery

  • 1× Fliegl digging bucket, cutting width 500 mm, with 4 welded-on teeth
  • MS08SY mount (symmetrical) and transport lug

Optional: Extended cutting edge – please enquire when ordering.

Technical data

Fliegl digging bucket 500 mm – technical data
ManufacturerFliegl Agro-Center GmbH
Equipment typeDigging bucket (excavator bucket)
Excavator class12–16 t
MountMS08SY (symmetrical)
Cutting width500 mm
SAE capacityapprox. 0,212 m³
Weightapprox. 375 kg
Teeth4 pieces, welded on
Bottom and side platesHighly wear-resistant HB 450 steel
Optional cutting edgeExtended cutting edge (on request)

Product description

Who it is designed for

The Fliegl digging bucket with a cutting width of 500 mm is designed for excavator operators, contractors and local authorities using 12- to 16-tonne excavators to dig trenches, open utility routes or expose foundations. Its narrow cutting width is suitable for precise excavation work – for example, when laying sewers, installing house connections or carrying out drainage work, where wider buckets would move unnecessarily large amounts of earth.

HB 450 steel for the bottom and sides

The bottom and side plates are made from highly wear-resistant steel with a hardness of 450 HB. When digging in stony or abrasive ground, HB 450 steel lasts significantly longer than conventional structural steel. In practice, this means longer service intervals between repairs and lower operating costs per cubic metre of material moved.

Four welded-on teeth

The four teeth are welded firmly in place. This makes the construction robust – bolted connections can work loose under heavy vibration, whereas welded-on teeth cannot. The downside is that worn teeth must be replaced by a welder; quick replacement on site is not possible. If you regularly work in highly abrasive soil and replace teeth frequently, consider whether the plug-in version would be a better fit.

MS08SY mount – suitable for 12- to 16-tonne excavators

The symmetrical MS08 mount (MS08SY) fits all excavators with a compatible MS08-class quick coupler. Most excavator manufacturers fit this mounting class to models in the 7- to 16-tonne segment, including Kubota, Takeuchi, Yanmar and many others. Before ordering, check your quick coupler's mounting dimensions against the MS08 standard.

Other width options at a glance

Fliegl digging buckets for 12–16 t excavators – available widths
Cutting widthSAE capacityWeight (catalogue)Application
500 mmapprox. 0,212 m³approx. 375 kgThis item – narrow trenches, utility installation
800 mmapprox. 0,528 m³approx. 415 kgGeneral earthworks, trench profiles
1.000 mmapprox. 0,660 m³approx. 485 kgWide trenches, foundation work
1.200 mmapprox. 0,792 m³approx. 555 kgLarge excavation volumes, pond construction

The data for the other widths comes from the 2019 catalogue – current weights may differ.

What this digging bucket does not have – and why

Deliberate equipment limitations of the Fliegl digging bucket 500 mm
FeatureWhy notAlternative
Plug-in / bolt-on teethWelded-on teeth are more resistant to vibration and cheaper to manufactureOrder a Fliegl digging bucket without teeth and retrofit plug-in teeth
Swivelling mount (tiltrotator)Tiltrotator mounts are specific to each excavator and considerably more expensiveOrder the tiltrotator separately and use an adapter
Hot-dip galvanisingNot usual for earthmoving attachments, as wear is dominated by abrasionRepaint regularly if used mainly above ground

Frequently asked questions

Will the Fliegl digging bucket fit my excavator?

The bucket is designed for 12- to 16-tonne excavators with an MS08SY quick coupler. The symmetrical MS08 mount fits most quick couplers in this class. Check your quick coupler's mounting dimensions before ordering.

Are the teeth replaceable?

The teeth are welded on and cannot simply be plugged in or bolted on. Replacing them requires welding work. Alternatively, Fliegl also offers the digging bucket without teeth, allowing you to retrofit plug-in teeth.

What is the 500 mm version suitable for?

The 500 mm cutting width is ideal for narrow trenches: sewer installation, house connections, drainage and cable routes. It moves less earth than wider buckets, saving backfill material and time.

What does HB 450 mean?

HB 450 is a measure of the steel's Brinell hardness. The higher the value, the more wear-resistant the material. HB 450 is significantly harder than ordinary structural steel (approx. HB 150) and offers a long service life in abrasive ground such as sand, gravel or crushed stone.

Can I retrofit the extended cutting edge?

The extended cutting edge is available as a factory option. Please contact us or the manufacturer directly to find out whether it can be retrofitted to a bucket that has already been delivered.

What other widths are available for my excavator class?

For 12- to 16-tonne excavators, Fliegl offers the digging bucket with cutting widths of 500, 800, 1.000 and 1.200 mm. All versions have an MS08 mount. Wider buckets hold more, but also weigh more – check your excavator's payload capacity.

Properties
Gerätetyp : Baggerlöffel
Working width: 0,50m
volume: 282L