Fliegl covering system »TopLift light«, with tarpaulin; Length 5600 mm
€4,100.00
Scope of delivery
- 1 × Fliegl TopLift light covering system, tarpaulin version
- Length: 5.600 mm
- Hydraulic connections included in the scope of delivery
- Universal kit – vehicle modifications required
- Installation and operating instructions
Technical data
| Model | TopLift light – tarpaulin version |
|---|---|
| Manufacturer | Fliegl Agrartechnik GmbH |
| Product type | Hydraulic lifting roof / covering system |
| Version | With tarpaulin (waterproof) |
| Length | 5.600 mm |
|---|---|
| Rear wall | approx. 800 mm (⚠ please confirm) |
| Width | Individually adapted for each vehicle |
| Weight | ⚠ not documented – reference: 5.900-mm version approx. 260 kg |
| Roof construction | Two-piece, split down the middle – roof halves overlap by approx. 15 cm (rain protection) |
|---|---|
| Tarpaulin | Tear-resistant fabric tarpaulin |
| Subframe | Steel support frame |
| Opening direction | Both sides (left and right) |
| Opening/closing time | approx. 10 seconds |
| Drive | Hydraulic |
|---|---|
| Connection | 1 double-acting spool valve |
| Operation | From the tractor seat / cab |
| Safety | Roof remains closed in the event of hydraulic failure (mast-angle design) |
| Design | Universal kit |
|---|---|
| Adaptation | Vehicle modifications required |
Product description
Who the TopLift light is designed for
The Fliegl TopLift light is a hydraulic lifting roof for three-way tippers, half-pipe tippers and push-off trailers. It replaces manual sheeting: instead of climbing onto the trailer for every load and pulling the tarpaulin over by hand, the driver opens and closes the roof from the tractor seat in approx. 10 seconds.
The tarpaulin version provides waterproof protection – important for moisture-sensitive loads such as grain, seed, wood chips or bulk materials that clump in the rain.
The TopLift light is aimed at farmers, contractors and local authorities who regularly transport bulk materials and need to secure their loads quickly and safely, without getting out of the cab – particularly on public roads, where load-securing requirements under Section 22 of the German Road Traffic Regulations (StVO) apply.
How the TopLift light works
The lifting roof consists of two roof halves, split down the middle and overlapping by approx. 15 cm – this prevents rainwater from entering at the centre of the roof.
When opening, the roof halves fold down sideways along the trailer's long sides. This leaves the entire loading area clear – even when the load is overfilled and forms a high mound of material, the roof does not get in the way during loading.
When closing, the halves are raised hydraulically and cover the load – without having to scrape off any material protruding above the sides first. This is exactly what saves time: the driver closes the roof even when the load extends above the side walls.
Safety: The mast angle is designed so that the roof remains closed in the event of hydraulic failure. It cannot open uncontrollably.
Tarpaulin vs net – which version is right for what?
| Criterion | With tarpaulin (this item) | With net |
|---|---|---|
| Weather protection | Waterproof | No rain protection |
| Load securing | Yes | Yes |
| Ideal for | Grain, seed, wood chips and moisture-sensitive goods | Soil, sand, gravel, green waste – loads that can withstand rain |
| Rear wall height (reference) | 800 mm | 500 mm |
| Weight (reference) | Heavier (approx. 260 kg at 5.900 mm) | Lighter |
Anyone transporting both types of load (e.g. grain in summer, soil in spring) is better off with the tarpaulin version – it also protects the load in the rain and meets load-securing requirements.
Universal kit – what “modifications required” means
The TopLift light is supplied as a universal kit. The width is individually adapted for each vehicle – in other words, not every TopLift light will fit every trailer without further work. Allow for modifications to the tipper/trailer body.
In practice, this means installation is not plug-and-play. Anyone with the necessary tools (welding equipment, drill, measuring tools) can install it themselves. If you want to be on the safe side, have it installed by a Fliegl dealer or specialist workshop.
Available lengths of the tarpaulin version
| Length | Rear wall | Suitable for | Item no. |
|---|---|---|---|
| 5.400 mm | 800 mm | ASW 110 | KPZHUB180017 |
| 5.600 mm | 800 mm | ⚠ Please confirm with Fliegl | KPZHUB180018 |
| 5.900 mm | 800 mm | ASW 140 / 160 / 256 | KPZHUB180019 |
| 6.400 mm | 800 mm | ASW 261 | KPZHUB180041 |
| 7.400 mm | 800 mm | ASW 271 | KPZHUB180042 |
| 8.400 mm | 800 mm | ASW 381 | KPZHUB180043 |
| 9.400 mm | 800 mm | ASW 391 / 491 | KPZHUB180045 |
| 10.400 mm | 800 mm | ASW 3101 / 4101 | KPZHUB180047 |
What the TopLift light is not – and what the standard TopLift is designed for
The TopLift light is the lighter version of the standard TopLift lifting roof. The key difference: the standard TopLift is used for large push-off trailers and heavy semi-trailers and is available in lengths up to 12 m. For three-way tippers, half-pipe tippers and smaller push-off trailers, the TopLift light is the lighter and more cost-effective option.
Frequently asked questions
Which trailers is the TopLift light with tarpaulin, 5600 mm, suitable for?
The TopLift light 5600 mm is designed as a universal kit. At 5600 mm, its length falls between the ASW 110 versions (5400 mm) and the ASW 140/160/256 versions (5900 mm). Please ask Fliegl to confirm exactly which trailer or tipper the 5600 mm version is intended for. Vehicle modifications should be allowed for in all cases.
What is the difference between the tarpaulin and net versions of the TopLift light?
The tarpaulin version provides waterproof protection and is suitable for moisture-sensitive loads (grain, seed, wood chips). The net version provides load securing only, without rain protection – ideal for soil, sand, gravel or green waste that can withstand rain.
What hydraulic connection do I need for the TopLift light?
You need 1 double-acting spool valve on the tractor or towing vehicle. The hydraulic connections are included in the scope of delivery. Fliegl does not publish precise oil pressure and flow rate specifications – please check compatibility with the tractor hydraulics with your dealer when ordering.
Can I install the TopLift light myself?
In principle, yes – the TopLift light is supplied as a universal kit. However, modifications to the vehicle body are required. Anyone with welding and drilling equipment can install it themselves. Alternatively, installation by a Fliegl dealer or specialist workshop is recommended.
Does the roof remain open in the event of hydraulic failure?
No. The mast angle of the TopLift light is designed so that the roof remains closed in the event of hydraulic failure. Its design prevents it from opening uncontrollably.
| Gerätetyp : | Abdecksysteme |
|---|