Fliegl covering system »SpeedCover«, trailer length 4500–11200 mm; PVC net 400 g/m²; without hydraulic hoses
€3,200.00
Available, delivery time: 2-5 days
Features
- Covering net made from hard-wearing mesh fabric
- Reel
- Hydraulically driven oil motor
- Protective device against damage and dirt
Not included: Hydraulic hoses (please order separately in the required length) and Z-profile.
Technical data
| Manufacturer | FLIEGL |
|---|---|
| Product type | Hydraulic covering system, universal retrofit kit |
| Width | 2.550 mm |
| Suitable for trailers | 4.500 – 11.200 mm long |
| Cover material | Mesh fabric, highly hard-wearing |
| Weight per unit area | 400 g/m² |
| Drive | Hydraulic oil motor |
| Operation | From the vehicle |
| Storage | Reel |
Product description
Hydraulic covering system with reel
The system is space-saving and can be fitted to almost any trailer. Unlike a cover that is pushed together, it is conveniently rolled in from the vehicle using a reel – so it does not obstruct the loading area.
Roll it up instead of pushing it together – that is the key
The difference may sound minor, but it determines how practical it is for everyday use.
| Sliding cover | Reel system | |
|---|---|---|
| Cover open | pushed together on the trailer bed | rolled up at the end |
| Loading area | partly obstructed | completely clear |
| Loading with a loader | Cover in the way | unobstructed |
| Dirt | Material falls onto the cover | Cover is rolled away |
What this means in practice: A cover pushed together takes up half a metre or more at the end of the trailer bed. When loading with a bucket or grab, that is exactly where it gets in the way – and the cover is regularly damaged.
With a reel, the cover sits outside the loading area – the full length of the trailer bed remains available.
Operated from the vehicle
The hydraulic drive makes covering and uncovering a matter of seconds.
Why this is more than just convenient:
- No need to climb onto the trailer bed. Falls from loading areas are among the most common causes of accidents in agriculture.
- No ladder required – otherwise unavoidable with high trailer beds and extensions.
- Works in windy conditions. Pulling a manual cover over an 11 m trailer bed is almost impossible in the wind.
- It actually gets used. If something is difficult, it gets skipped when time is short.
The last point is crucial: Loads of bulk material must be secured; this is not optional. A cover that can be closed in ten seconds will be used – one that takes five minutes of climbing will not.
Mesh fabric, 400 g/m²
The material has been chosen deliberately.
Why mesh rather than a solid cover:
- Breathable. With grain and damp material, this prevents condensation forming beneath the cover.
- Lower wind pressure. A solid cover acts like a sail when travelling – putting considerable strain on the frame and fixings.
- Does not billow. Solid covers lift and flap in the wind when travelling.
- Lighter. Less weight on the drive and reel.
What 400 g/m² means: This is a robust weight per unit area for mesh fabric. Lighter nets tear around the eyelets when kept under tension for years and subjected to the stresses of travelling.
What the system is designed for: Securing bulk material to prevent it falling or blowing away. Mesh is not designed to provide waterproof protection – solid covers are intended for that purpose.
Securing loads during bulk material transport
This is the main reason for buying the system.
The legal position: Loads must be secured so that they cannot slide, topple or fall off, even during emergency braking or an evasive manoeuvre. For bulk material, this includes protection against it blowing away.
What happens without a cover:
- Material flies onto the road – with gravel and crushed stone, this creates a risk of stones hitting vehicles behind.
- Grain and lightweight material blow away – causing loss and making the road dirty.
- During an inspection you may receive a notice and be prohibited from continuing your journey.
For the specific application the applicable requirements must be followed – these also depend on the material, loading height and route.
The protective device
It protects against damage and dirt.
Protection against: The rolled-up cover sits at the end of the vehicle – exactly where it is exposed to spray, dirt and obstacles when manoeuvring.
Why this determines service life: A cover that is rolled up while constantly wet and dirty wears out much faster. And a damaged reel can no longer roll the cover in and out smoothly.
Universal fit for trailer bed lengths from 4.500 to 11.200 mm
This wide range covers practically all common trailer sizes.
| Trailer bed length | Typical trailer |
|---|---|
| 4.500 – 5.500 mm | Single-axle and smaller tandem tippers |
| 6.000 – 7.500 mm | Tandem three-way tippers, half-pipe tippers |
| 8.000 – 11.200 mm | Three-axle trailers, hook-lift trailers, semi-trailers |
The width of 2.550 mm corresponds to the permitted vehicle width – so the system fits trailer beds up to the maximum width.
What to bear in mind during installation
The manufacturer makes this clear: This is a universal retrofit kit – modifications are required.
What this means in practice:
- Not plug and play. The kit will not necessarily fit every trailer without modification.
- Cutting and welding may be required.
- Technical expertise required. Designed for workshops and experienced users.
Three items must be ordered separately:
| Item | Note |
|---|---|
| Hydraulic hoses | order separately in the required length |
| Z-profile | not included in the kit; order separately if required |
| Weld-on bracket set | optional, Art. KPZHUB500012 (for ASW) |
| Installation kit | optional, Art. KPZHUB500260 (for ASW 110 to ASW 3101) |
For FLIEGL ASW trailers there are pre-prepared solutions; with other makes, more modification work should be expected.
Hydraulic requirements
The oil motor pulls in the covering net.
What the towing vehicle must have: a hydraulic connection for the drive. The hoses must be ordered separately in the required length – this depends on the vehicle and drawbar length.
Note on hose length: The hoses must allow for the trailer to articulate on tight turns. Hoses that are too short will tear off when manoeuvring – if in doubt, choose a more generous length.
Applications
Agricultural transport, agricultural contractors, harvest and silage transport, grain transport, construction companies and earthworks, local authorities and depots, recycling and waste disposal, vehicle fleets.
Installation and operating notes
- Modifications are required – the kit is designed as a universal retrofit kit.
- Order hydraulic hoses separately in the correct length; allow extra length so they can accommodate articulation.
- Order the Z-profile separately if required.
- For FLIEGL ASW trailers, check the compatible bracket and installation kits.
- Ensure that the towing vehicle has a hydraulic connection.
- Install on load-bearing points on the trailer bed; take the stresses caused by wind when travelling into account.
- Before every journey, check that the cover is fully closed and secured.
- Check the net regularly for tears, torn eyelets and areas of abrasion.
- Check that the reel and drive operate smoothly.
- Do not operate when the cover is iced over or frozen in place – this will damage the fabric and drive.
- When loading, make sure the load does not damage the rolled-up cover.
- Observe the applicable load-securing requirements; the cover does not replace any other securing measures.
Frequently asked questions
Which trailers is the system suitable for?
For trailer bed lengths from 4.500 to 11.200 mm and a width of 2.550 mm. It is a universal retrofit kit; modifications are required.
Are the hydraulic hoses included?
No. They must be ordered separately in the required length. The Z-profile is also not included in the kit.
What is the advantage over a sliding cover?
The cover is rolled up instead of pushed together. This leaves the loading area completely clear – the cover is not in the way when loading with a bucket or grab.
Why use mesh fabric instead of a solid cover?
Mesh is breathable, prevents condensation and does not act like a sail when travelling. However, it is not designed to provide waterproof protection.
How is the cover operated?
Hydraulically, via an oil motor, from the vehicle. There is no need to climb onto the trailer bed.
What accessories are available for FLIEGL ASW trailers?
A weld-on bracket set (KPZHUB500012) and an installation kit for ASW 110 to ASW 3101 (KPZHUB500260).
How heavy is the net?
The mesh fabric has a weight per unit area of 400 g/m² – a robust specification that withstands long-term tension and the stresses of travelling.
Do I need a hydraulic connection on the towing vehicle?
Yes, to drive the oil motor. The hose length depends on the vehicle and drawbar and should allow for articulation on tight turns.
| Gerätetyp : | Abdecksysteme |
|---|