Fliegl combination pallet fork »Freisicht« – pallet fork »Freisicht«, 1500 mm, straight Euronorm mount; Tine length 900 mm; Tine cross-section 100 x 40 mm; Load capacity 2.5 t; FEM 2A
€950.00
Scope of delivery
- 1× Fliegl forklift fork »Freisicht«, guide rail 1,500 mm
- 2× forged fork tines, 900 mm long, 100 × 40 mm cross-section, FEM 2A
- 5 welded-in tapered bushes for optional round bale tines
- Straight Euro mount (Euronorm), pre-assembled
Technical data
| Manufacturer | Fliegl |
|---|---|
| Equipment type | Combination forklift fork for front loader |
| Design | »Freisicht« – open design with no crossbar in the field of vision |
| Guide rail width | 1,500 mm |
| Tine length | 900 mm |
| Tine cross-section | 100 × 40 mm |
| Tine mounting | FEM 2A, height approx. 410 mm |
| Load capacity | 2,500 kg (per pair of tines) |
| Mount | Euro mount (Euronorm), straight |
| Surface | Fully galvanised |
| Tapered bushes | 5 pieces (welded in, for round bale tines) |
| Tine adjustment | Spring adjustment with snap-lock |
Product description
Who it is designed for
The Fliegl »Freisicht« forklift fork is designed for farmers, agricultural contractors and businesses that use a front loader to move pallets, big bags, mesh boxes and round bales. Combining a forklift fork with welded-in tapered bushes gives you two implements in one: transport pallets using the fork tines, or handle round bales using screw-on round bale tines. Switching between the two functions requires no workshop assistance – unhook the fork tines, screw in the round bale tines and get back to work.
»Freisicht« – open design with no crossbar
On conventional forklift forks, a crossbar or fork carriage frame obstructs the view ahead. The »Freisicht« design does away with this crossbar in the driver's field of vision. The result: the driver can see directly over the fork to the pallet or bale. This makes positioning easier when picking up and setting down loads, and reduces the risk of damaging loads or racking.
Forged tines with FEM 2A
The two fork tines are forged, not bent or welded. Forged tines have a denser grain structure and can withstand higher loads than bent tines of comparable dimensions. The FEM 2A mounting (height approx. 410 mm) is the most common class for agricultural front loaders and compact forklift trucks. The tines slide along the guide rail using spring adjustment with a snap-lock – infinitely adjustable and tool-free.
Angled-milled guide rail to ISO 2328
The guide rail is milled at an angle. This makes the tines easier to hook on and slide than on rails with a straight top edge. Manufacture to ISO 2328 ensures that FEM 2A tines from other manufacturers also fit – an advantage when replacement tines need to be available quickly.
Fully galvanised – no repainting required
The entire forklift fork is hot-dip galvanised. The zinc coating provides lasting protection against corrosion, including in areas where paint typically chips off forklift forks: on the guide rail (contact with the tines), at the tapered bushes (contact with the round bale tines) and on the Euro mount (mechanical stress when locking into place). Galvanisation is particularly beneficial if you store the fork outdoors or use it for winter maintenance (e.g. salt pallets).
5 tapered bushes for round bale tines
Five tapered bushes are welded into the guide rail. Optional round bale tines are inserted into these bushes and bolted in place. This turns the forklift fork into a round bale fork – without needing a second attachment or extra storage space on the implement carrier. The arrangement of the five bushes allows you to handle round bales of different diameters (typically 120–180 cm).
900 mm tine length – for standard Euro pallets
The 900 mm tine length is sufficient to fully slide under a standard Euro pallet (1,200 × 800 mm) from the 800 mm side. Longer tines are needed to pick up pallets from the 1,200 mm side or to handle industrial pallets (1,200 × 1,000 mm) – the Freisicht range is also available with 1,200 mm tines.
Available versions in the Freisicht range
| Tine length | Tine cross-section | Load capacity | Guide rail |
|---|---|---|---|
| 900 mm | 100 × 40 mm | 2,500 kg | 1,500 mm – this item |
| 1,200 mm | 100 × 40 mm | 2,500 kg | 1,500 mm |
| 1,200 mm | 80 × 40 mm | 2,000 kg | 1,500 mm |
Note: All versions have the same guide rail width (1,500 mm), Euro mount and FEM 2A tine mounting.
What this forklift fork does not have – and why
| Feature | Why not | Alternative |
|---|---|---|
| Hydraulic side shift | Tines are positioned manually using spring adjustment – sufficient for standard use | Fliegl forklift fork with hydraulic side shift |
| Integrated scales | Adds cost and weight to a simple, robust implement | Separate front loader scales between the Euro mount and fork |
| Three-point linkage (rear) | The forklift fork is designed as a front loader attachment | Fliegl three-point adapter + forklift fork |
| Tine length over 1,200 mm | The open Freisicht design is not suitable for longer tines (1,600 mm+) | Fliegl »Standard« forklift fork with longer tines |
Frequently asked questions
What does »Freisicht« mean for a forklift fork?
»Freisicht« means that the fork is designed so the driver can see directly ahead over it from the cab. There is no crossbar or solid frame in the field of vision. This makes it easier to pick up and set down pallets and bales accurately – particularly in confined storage areas or in the yard.
Will tines from other manufacturers fit?
Yes, provided they comply with FEM class 2A (mounting height approx. 410 mm) and the guide rail is manufactured to ISO 2328. This is the case with the Fliegl Freisicht. FEM 2A tines are an industry standard and are available from numerous manufacturers.
Can I use it to transport round bales?
Yes – the five welded-in tapered bushes are designed for this purpose. Screw the optional round bale tines into the bushes and the forklift fork becomes a round bale fork. The fork tines do not need to be removed – for some applications, they can serve as additional support points. Round bale tines are not included in the scope of delivery and must be ordered separately.
Will the fork fit my front loader?
The fork has a straight Euro mount (Euronorm). If your front loader has a Euro mount, the fork will fit directly. This is the case with most European front loaders (Stoll, Alö, Quicke, Hauer, Hydrac, etc.).
Are 900 mm tines long enough for Euro pallets?
Yes – a standard Euro pallet (1,200 × 800 mm) has three openings for the tines. From the 800 mm side (crosswise entry), the 900 mm tines slide fully under the pallet. From the 1,200 mm side (lengthwise entry), the tines do not reach the rear edge, so the pallet overhangs. For lengthwise entry or industrial pallets (1,000 mm deep), 1,200 mm tines are recommended.
Why is the fork fully galvanised rather than painted?
Hot-dip galvanising provides longer-lasting protection than paint because the zinc coating continues to protect cathodically even when mechanically damaged (scratches, abrasion) – the surrounding zinc protects the exposed area. Paint would quickly chip off a forklift fork that is subjected to daily mechanical stress (hooking on tines, dragging pallets, locking into the Euro mount). Galvanisation withstands this wear without requiring touch-ups.
| Gerätetyp : | Palettengabel |
|---|